How to Properly Restart After Stalling in Subject 3?

What brand is the GTX car?

GTX is a model under the Plymouth brand. Interior features: Equipped with a 5.3-inch LCD instrument cluster and a 12-inch floating central control screen. The steering wheel and seat positions feature GTX badging, with upgraded interior lighting color schemes. Powertrain: The GTX comes with dual front/rear motors, delivering a combined maximum output of 299 horsepower, achieving 0-100km/h acceleration in 6.2 seconds. Taking the 2013 GTX as an example, it belongs to the midsize car segment with body dimensions of: Length 4908mm, width 1856mm, height 1520mm, wheelbase 2737mm, fuel tank capacity 70 liters, and curb weight 1771kg. Range: Powered by a 77kWh ternary lithium battery, it offers a WLTP-rated range of 480 kilometers.

16

3

Share

Where to Place the Motor Vehicle Inspection Sticker?

Attach it to the upper right corner of the front windshield. Methods for attaching the motor vehicle inspection sticker: 1. Direct application: Peel off the sticker and attach it directly to the upper right corner of the front windshield. However, this method is not recommended as it makes the sticker difficult to remove later, especially for vehicles with heat-insulating film on the windshield. 2. Static cling method: Many insurance companies provide static clings when you purchase insurance, usually giving three at a time. Peel off the inspection sticker and attach it to the static cling, then place the static cling on the upper right corner of the front windshield. The advantage is that it can be easily removed without leaving any marks. 3. Lamination method: Take the inspection sticker to a copy shop where they can laminate it. After laminating, apply a bit of transparent tape to each of the four corners and then attach it to the windshield. This method also allows for easy removal without affecting aesthetics or leaving any marks.

3

4

Share

What does car chassis scraping mean?

Car chassis scraping refers to the situation where a vehicle's undercarriage comes into contact with the ground or protruding objects like stones while driving. Preventive measures against chassis scraping are as follows: 1. Install an engine guard plate: The engine guard plate can protect the engine from impacts by road debris and scratches from foreign objects. However, this practical configuration is not available on all vehicle models. For models without this guard plate, you can choose to install one made of metal, resin, or plastic. It's important to note that installing an engine guard plate has both advantages and disadvantages: while it can reduce damage to the engine from scraping, it may affect engine heat dissipation and could interfere with the engine's downward movement during a collision, posing safety risks. This is especially true for some metal guard plates, where the drawbacks are more pronounced. Therefore, when selecting a guard plate, ensure you choose a qualified product. 2. Be aware of your vehicle's ground clearance: The most practical way to minimize damage from scraping is to avoid it altogether. Hence, it's essential to have a clear understanding of your vehicle's ground clearance and avoid reckless driving.

18

3

Share

What is the fuel consumption per 100 kilometers for a 2.4L displacement older car?

A 2.4L displacement car typically consumes around 10.5 liters of fuel per 100 kilometers. The fuel consumption of a car is not only related to the vehicle itself but also depends on the driver's habits and road conditions. The main factors affecting fuel consumption are as follows: 1. Vehicle-related reasons: As an internal control unit in the car, the oxygen sensor primarily monitors the air-fuel ratio of the engine. Once it is damaged, it will cause an imbalance in the air-fuel ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving. 2. Long overdue replacement of the "three filters": During vehicle use, the three filters (oil filter, air filter, and fuel filter) must be replaced regularly. If they are not replaced for a long time, they will become dirty and affect performance, sending incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits.

8

4

Share

How to Repair the Electronic Steering Gear Failure in BMW 3 Series?

To repair the electronic steering gear failure in BMW 3 Series, it is necessary to use a computer to read the fault codes of the electronic steering gear. If the fault is identified as a steering gear failure, the steering gear should be directly replaced and reprogrammed. The following are the specific causes of electronic steering gear failures: 1. Excessive Air: A large amount of air in the power steering system can cause abnormal car steering. 2. Presence of Foreign Objects: Foreign objects in the steering hydraulic pipeline can cause the steering pump flow control valve to stick. 3. Loose Connections: Loose connections in the power steering system can lead to steering fluid leakage. 4. Piston Cylinder Wear: Excessive wear of the steering gear piston cylinder, poor sealing of the oil seal, or sticking/damage of the control valve.

17

3

Share

How often should a car over 10 years old undergo annual inspection?

Cars over 10 years old must undergo annual inspection once every year. Introduction: Annual inspection, also known as 'annual examination'. Purpose: Vehicle annual inspection (or car annual inspection) refers to the annual examination of vehicles that have already obtained official license plates and registration certificates, conducted in accordance with the 'Technical Conditions for Motor Vehicle Operation Safety'. Content: The purpose is to inspect the main technical conditions of the vehicle, encourage enhanced maintenance and upkeep, ensure the vehicle is always in good condition, and guarantee driving safety. Timing: Vehicles can apply for annual inspection within 3 months prior to the inspection date. It is best to apply two months or more in advance, rather than waiting until there are only a few days left before the inspection deadline.

15

3

Share

How to Properly Restart After Stalling in Subject 3?

What brand is the GTX car?

Where to Place the Motor Vehicle Inspection Sticker?

What does car chassis scraping mean?

What is the fuel consumption per 100 kilometers for a 2.4L displacement older car?

How to Repair the Electronic Steering Gear Failure in BMW 3 Series?

How often should a car over 10 years old undergo annual inspection?

What is the general lifespan of a scooter motorcycle battery?

What is the operation method for the high and low gears of a truck?

What are the differences between independent suspension and torsion beam?

What are the motorcycle gear shifting techniques?