How to Prevent Transmission Failures in GAC Trumpchi GS4?
1 Answers
Methods to prevent transmission failures in GAC Trumpchi GS4 are as follows: 1. Master the transmission oil replacement cycle: The internal control mechanism of an automatic transmission is very precise with small matching gaps, so the oil replacement cycle for most automatic transmissions is generally two years or 40,000~60,000 kilometers. During normal use, the operating temperature of transmission oil is usually around 120 degrees Celsius, thus requiring high-quality oil that must be kept clean. Secondly, prolonged use of transmission oil can lead to sludge formation, which may increase wear on friction plates and components, and also affect system oil pressure, thereby impacting power transmission. Thirdly, sludge in dirty oil can hinder the movement of valves in the valve body, affecting oil pressure control and causing abnormal transmission operation. Regular inspections are necessary. 2. Correctly replace transmission oil: A better method is dynamic oil replacement, using specialized transmission cleaning equipment to fully circulate the old oil during transmission operation, draining it completely before adding new transmission oil, achieving a replacement rate of over 90% and ensuring effective oil change. 3. Check if the automatic transmission oil level is normal: The method for checking automatic transmission oil differs from engine oil. Engine oil is checked when the engine is cold, while transmission oil needs to be preheated to about 50°C, then the gear lever should be shifted through all gears for 2 seconds each before placing it in park. At this point, the oil level on the dipstick should be between the maximum and minimum marks. If it is insufficient, add oil of the same quality promptly.