How to prevent rolling back when starting on a slope with an automatic transmission?

1 Answers
WalkerRose
07/25/25 5:16pm
Before starting, be sure to firmly pull the handbrake. Use your right foot to firmly press the brake pedal when starting the car, and only start the car when everything is ready. When preparing to start the car, first press the brake, shift to N gear, and then ignite. Shift from N gear to D gear, release the handbrake, and lift your foot off the brake. Once everything is ready, you can release the brake, while simultaneously moving your right foot to the accelerator pedal, gradually applying throttle, and slowly releasing the handbrake with your right hand.
Was this review help?
3
4
Share
More Forum Discussions

Do foreign cars require vehicle inspection?

Foreign cars require vehicle inspection. Introduction to vehicle inspection: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. Vehicle inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Content of vehicle inspection: Check whether the engine, chassis, body, and their accessories are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether major assemblies have been replaced and match the initial inspection records. Verify whether the vehicle's braking performance, steering control, lighting, exhaust, and other safety features comply with the technical requirements for safe vehicle operation. Examine whether the vehicle has been modified, reconstructed, or altered; whether the registration details on the driving license, license plate, and vehicle records match the current condition of the vehicle and if any changes have been made; and whether approval and modification procedures have been completed. Check for any damage, tampering, or illegible characters on the license plate, driving license, or enlarged license plate markings on the vehicle, and determine if replacement is necessary.
16
2
Share

What are the new regulations for annual inspection of passenger cars?

The new regulations for annual inspection of passenger cars stipulate that vehicles within 5 years should be inspected once a year, while those over 5 years old require inspection every 6 months. Introduction to annual inspection: Vehicle annual inspection, also known as motor vehicle annual inspection, involves checking whether the engine, chassis, body and its accessories are clean, complete and effective; whether the paint surface is uniform and aesthetically pleasing; whether major assemblies have been replaced and match the initial inspection records. It examines whether the vehicle's braking performance, steering control, lighting, exhaust and other safety performance meet the technical requirements for safe operation of motor vehicles. The inspection verifies whether the vehicle has been modified or altered, and whether the driving license, license plate, and vehicle registration records match the current condition of the vehicle, including any changes and whether approval and modification procedures have been completed. It also checks for damage, alteration or illegibility of license plates, driving license and enlarged license plate markings on the vehicle, and determines if replacement is needed. Purpose of vehicle annual inspection: Vehicle annual inspection helps to promptly eliminate potential safety hazards, encourages enhanced vehicle maintenance, and reduces the occurrence of traffic accidents.
11
1
Share

What Brand is NIO?

NIO is a global smart electric vehicle brand, established in November 2014. Its main products include the NIO ES6, NIO ES8, NIO EC6, NIO EVE, and NIO EP9. NIO is committed to creating a joyful lifestyle for users by providing high-performance smart electric vehicles and an ultimate user experience. Below is relevant information: Development History: In November 2014, NIO was jointly founded by Li Bin, Richard Liu, Li Xiang, Tencent, Hillhouse Capital, Shunwei Capital, and other top internet companies and entrepreneurs who deeply understand users. It has received investments from dozens of renowned institutions, including Temasek, Baidu Capital, Sequoia Capital, Hopu Investments, Lenovo Group, Warburg Pincus, TPG, GIC, IDG, and Joy Capital. NIO ES8: As a very unique presence in the domestic new energy vehicle sector, the NIO brand and its first model, the ES8, have never lacked attention since their debut. For NIO, which already has the ES6 and is about to mass-produce the EC6, the continued presence of the ES8 remains very important.
12
4
Share

How to Change the Transmission Oil for Audi S3?

Audi S3 adds transmission oil from the oil drain port. After adding, there is an overflow pipe inside. The excess will flow out. Then tighten the bolt. Connect the 5051 diagnostic instrument to check the transmission oil temperature, which should be around 37°C. Then loosen the oil drain bolt again to drain the excess oil. Precautions before changing the transmission oil: 1. Before changing the oil, please confirm that there are no fault codes in the transmission. If there are fault codes stored in the automatic transmission control module, do not change the oil and proceed to the inspection and repair process. 2. Before changing the oil, please conduct a road test on the vehicle to confirm that there are no issues with shifting quality or acceleration. If there are problems with shifting quality or acceleration, do not change the oil and proceed to the inspection and repair process. 3. For vehicles that have not had an oil change for 100,000 kilometers or more than 3 years since the last oil change, please perform a maintenance inspection on the automatic transmission before changing the oil based on the actual situation, and inform the customer of the risks associated with not changing the oil on time for a long period or mileage.
6
3
Share

What is the reason for the impact sound when accelerating with a dual-clutch transmission?

The reason for the impact sound when accelerating with a dual-clutch transmission is that the clutch is not fully depressed. Introduction to dual-clutch transmissions: An automotive dual-clutch transmission (DCT) is a type of transmission that has two clutches—one controlling the odd-numbered gears and the other controlling the even-numbered gears. A dual-clutch transmission combines the characteristics of both manual and automatic transmissions, offering the flexibility of a manual transmission and the comfort of an automatic transmission while providing uninterrupted power output. It acts as a switch for power transmission between the engine and the transmission. The function of a dual-clutch transmission: The primary function of a dual-clutch transmission is to ensure smooth vehicle starts, reduce the impact load on the transmission gears during gear shifts, and prevent overloading of the drivetrain. When using a dual-clutch transmission, it is advisable to frequently engage the manual mode. This is because the dual-clutch system has a memory programming feature—regular use of the manual mode allows the transmission to develop a memory effect and operate based on this memorized pattern. This helps reduce shift frequency and lowers the probability of faults occurring.
4
5
Share

What Causes the Adhesive on the Rear Window Film to Peel Off?

The reason for adhesive peeling off the rear window film may be due to human factors and inherent adhesive factors causing the protective film adhesive to detach. Human factors: During the operation, high-temperature resistant protective film is required in high-temperature conditions; Before applying the film, ensure the surface is free of grease, banana oil, and other chemical residues, otherwise, these residues can easily react chemically with the adhesive, leading to adhesive peeling. Inherent adhesive factors: Based on the residual condition of the pressure-sensitive adhesive on the protected surface and the substrate, the phenomenon of residual adhesive on the protective film can be divided into the following three situations: Cohesive failure, where both the protected surface and the substrate have pressure-sensitive adhesive, and the adhesive-coated surface of the protective film loses its gloss; Adhesive failure, where the protected surface has a significant residue of adhesive skin, and the substrate is visible on the adhesive-coated surface of the PE protective film; Migration residue, where the protected surface has a small amount of pressure-sensitive adhesive residue, and the adhesive-coated surface of the PE protective film maintains good gloss.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.