How to Practice Driving After Getting a Driver's License?

2 Answers
VonLeonardo
07/25/25 8:09am
Here are some methods to practice driving after obtaining a driver's license: Practice on roads with less traffic. Practice on provincial highways or roads with heavy traffic. Practice in urban areas. Below is relevant information about the driver's license test: Test Content: The test includes three subjects: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). The order of the test subjects is traffic regulations and related knowledge, field driving, and road driving, conducted sequentially. If a candidate fails the previous subject, the following subjects will not proceed. Each subject has two attempts. If both attempts are unsuccessful, the test is terminated. Test Time Regulations: After completing the Subject 1 test, candidates must pass Subject 2 and Subject 3 within three years. If they fail to do so, the test results become invalid, and they must re-register for the Subject 1 test. According to the new regulations, both Subject 2 and Subject 3 have five attempts each. If a candidate cannot pass within these five attempts, they must retake the Subject 1 test.
Was this review help?
20
1
Share
IslaLynn
08/10/25 6:51pm
After getting my driver's license, I was so nervous that my palms were sweating. The first time I drove alone was in an empty parking lot. I started with the most basic skills: starting, stopping, and using turn signals, practicing for about an hour each time, and making sure to go every weekend. After a few days of practice, I gradually moved to small neighborhood roads to practice turning and observing traffic signs. Throughout the process, I noted my common mistakes, such as misjudging distances, and intentionally practiced maintaining proper following distances more. A month later, I dared to drive on city roads, focusing on lane changes and navigating roundabouts. I avoided rush hours and chose early mornings when there were fewer people to practice. I also deliberately practiced in rainy conditions to learn how to use windshield wipers—though visibility was poor at first, I got used to it after a few tries. I always had a friend with me to remind me about safety during all my practice sessions. Now, I confidently drive to and from work, believing that patience and practice are the most important. Don’t rush to challenge yourself with complex roads too soon.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

How Many Cylinders Does the Honda Fit Have?

Honda Fit is a four-cylinder car. The introduction of Honda Fit and the working principle of the four-cylinder engine are as follows: Introduction: It is equipped with a 1.5-liter naturally aspirated four-cylinder Earth Dreams engine, with a wheelbase of 2530 mm, and the length, width, and height are 4109 mm, 1694 mm, and 1537 mm respectively. The maximum power is 96 kW, and the maximum torque is 155 Nm. The maximum power speed of this engine is 6600 rpm, and the maximum torque speed is 4600 rpm. Working Principle: When the combustion gas in the sealed cylinder expands, it pushes the piston to do work, converting the thermal energy of gasoline (diesel) into mechanical energy. It mainly consists of components such as the cylinder block, crankcase, cylinder head, and cylinder gasket.
8
0
Share

What is the working principle of the Atkinson cycle?

The Atkinson cycle is based on the Otto cycle internal combustion engine. By using a set of complex linkage mechanisms, Atkinson made the compression stroke of the engine smaller than the expansion stroke. This ingenious design not only improves the engine's intake efficiency but also ensures that the expansion ratio is higher than the compression ratio, effectively enhancing the engine's efficiency. This working principle is known as the Atkinson cycle. The Atkinson cycle engine primarily features the following three technical characteristics: By increasing the compression ratio to 12 and relatively reducing the combustion chamber volume, the engine achieves higher thermal efficiency. Through a completely redesigned valve timing, the engine's expansion ratio is increased without a significant rise in the compression ratio, thereby avoiding the occurrence of knocking. By optimizing the matching of the electronic fuel injection system and adjusting the fuel injection quantity and ignition timing, the engine's thermal efficiency is further improved, and the fuel consumption rate is enhanced.
16
1
Share

What brand is the transmission of the Trumpchi GS3?

The manufacturer of the Trumpchi GS3 transmission is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Trumpchi GS3 transmission uses a 6-speed automatic manual transmission or a 6-speed manual transmission. The automatic manual transmission has eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT transmission with added manual shifting functionality. The purpose of the automatic manual transmission is to enhance the driving pleasure of automatic transmission vehicles. When using the Trumpchi GS3 transmission in daily driving, the following points should be noted: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid coasting in neutral for long periods. While driving manual transmission models, many experienced drivers may coast in neutral, but for automatic transmission models, this can cause the transmission to overheat and produce a noticeable jolt when shifting back into D gear. Never shift into D/R gear before the vehicle has come to a complete stop. Many drivers, aiming for smooth operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and lead to gear grinding over time. Avoid frequently climbing steep slopes in D gear. On steep inclines, automatic transmission vehicles may overheat due to high load or shift prematurely, resulting in insufficient power. In such cases, use manual mode to limit low gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move the vehicle onto the tow platform while it is in N gear. Avoid using tow ropes or towing the vehicle directly.
17
5
Share

What is a Dash Cam Used For?

Dash cams are used to record video information around the vehicle. Here are some relevant details about dash cams: As evidence: A dash cam can function as a surveillance device, recording surrounding video footage that can serve as evidence when necessary. In the event of a traffic accident, the dash cam footage can be reviewed to determine who is at fault. Dash cams help protect your interests. Protecting interests: While there are many electronic surveillance devices on roads today, even high-tech equipment like traffic cameras can occasionally malfunction. In such cases, the dash cam installed in your vehicle plays a crucial role, as you can use its footage to appeal to traffic police for reconsideration.
3
0
Share

How to Repair Scratched Aluminum Alloy Wheels?

Here are the methods to repair scratched aluminum alloy wheels: 1. Minor scratches: The wheel can be polished. 2. Severe scratches: A metal filler can be used, followed by a bright spray treatment to restore the wheel to its original condition. Information about wheels is as follows: 1. Wheel: It is a cylindrical metal component that supports the tire from the inside and is mounted on the axle. Also known as a rim, steel rim, or hub. 2. Manufacturing methods of aluminum alloy wheels: (1) Gravity casting method: Aluminum alloy solution is poured into the mold using gravity, and after forming, it is processed and polished by a lathe to complete production. The manufacturing process is relatively simple, does not require precise casting techniques, and is cost-effective with high production efficiency. However, it is prone to bubbles (sand holes), uneven density, and insufficient surface smoothness. Geely has used this method for a considerable number of models, mainly in early production models, with newer models often switching to newer wheel designs. (2) Forging method: A whole aluminum ingot is directly extruded into shape on a mold by a thousand-ton press. The advantages are uniform density, smooth and fine surface, thin and lightweight wheel walls, and the highest material strength, which is over 30% higher than casting methods. However, due to the need for more sophisticated production equipment and a yield rate of only 50-60%, the manufacturing cost is higher. (3) Low-pressure precision casting method: Precision casting is performed under low pressure of 0.1Mpa. This casting method offers good formability, clear contours, uniform density, and a smooth surface. It achieves both high strength and lightweight while controlling costs, with a yield rate of over 90%, making it the mainstream manufacturing method for high-quality aluminum alloy wheels.
7
0
Share

Reasons for Slow Charging of New Energy Vehicles

Reasons for slow charging may include battery aging. Other reasons and charging precautions are as follows: Other reasons: The charging gun is not properly inserted, the charging gun head temperature is too high, the battery temperature is too low, the battery charge level is relatively high, or there is a charging equipment malfunction. Precautions: Do not charge immediately after prolonged exposure to high temperatures. After extended exposure, the temperature of the power box rises, causing the battery temperature to increase. Charging immediately can accelerate the aging and damage of internal wiring. It is not recommended to turn on the air conditioning while charging, as this increases the internal charge load of the battery, accelerates the battery degradation of the power battery pack, and reduces the battery's lifespan. Avoid charging during thunderstorms and always choose charging piles that comply with national standards.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.