How to Play USB Songs in Lavida Car?

Which manufacturer produces the Haval H6?

Haval H6 is produced at the Great Wall Motors Tianjin New Factory. The Haval H6 has dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, with a wheelbase of 2738mm. Its engine model is GW4N20, and the vehicle weight is 1675kg. The front suspension type of this car is MacPherson independent suspension, and the rear suspension type is double-wishbone independent suspension. The vehicle is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 211ps, maximum torque of 325nm, and maximum power of 155kw, paired with a 6-speed manual transmission.

1

4

Share

What is the BMW 5 Series Maintenance Schedule and Items?

BMW 5 Series regular maintenance items include replacing engine oil, oil filter, fuel filter, and air filter; checking the braking system for oil leaks and whether the brake pads are within the specified thickness; inspecting engine belt wear and adjusting belt tension if necessary; examining the transmission, drive shaft, and universal joint protective covers for oil leaks and damage; checking tire tread depth, tire pressure, and tire wear, and performing a wheel alignment if needed. Below is an introduction to the BMW 5 Series maintenance cycle and precautions. BMW 5 Series maintenance cycle: It is recommended to perform a routine maintenance every 10,000 kilometers for the BMW 5 Series. Before reaching 60,000 kilometers, the maintenance mainly alternates between oil and filter changes and the replacement of the three filters (oil, fuel, and air). A comprehensive fluid change is typically conducted at the 60,000-kilometer mark. BMW 5 Series maintenance precautions: Avoid running the engine for extended periods in an unventilated garage, as the exhaust contains carbon monoxide, an invisible and odorless toxic gas; avoid sucking on fuel pipes with your mouth, as gasoline is not only flammable and explosive but also toxic; avoid contact with carburetor cleaner, as most carburetor cleaners contain methyl chloride, aromatic compounds, and ethanol, all of which are toxic to some extent.

6

4

Share

How to Use the Engine Auto Start-Stop Function?

The method to use the engine auto start-stop function is: 1. Quickly shift to P gear when the engine stops, then release the brake; 2. Reduce current consumption; 3. Avoid repeatedly pressing the brake when the engine is off; 4. Let the engine speed drop to zero, engage the starter gear, and then restart; 5. Do not activate the auto start-stop system during low-speed parking or when the air conditioning is on. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) and restarts it when it's time to move forward again. Additionally, turning off the engine when parked effectively reduces noise and vibration, enhancing the driving experience.

2

3

Share

What tires are used for the 2013 Cruze?

The 2013 Cruze uses three specifications of tires, which are 205/60R16, 205/65R15, and 215/50R17. Among them, 205 in 205/60R16 represents the tire's section width of 205mm, 60 represents the tire's aspect ratio of 60%, R indicates that the tire type is radial, and 16 represents the rim diameter of 16 inches. The 2013 Cruze is a compact car with a length, width, and height of 4598mm, 1797mm, and 1477mm respectively, a wheelbase of 2685mm, equipped with a 1.6L naturally aspirated engine, matched with a 5-speed manual or 6-speed automatic transmission.

4

3

Share

What is the speed range for each gear?

Each gear has the following speed ranges: 1st gear ranges from 10 km/h; 2nd gear ranges from 20 km/h; 3rd gear ranges from 20 to 40 km/h; 4th gear ranges from 40 to 60 km/h; 5th gear ranges from 60 km/h. When driving a manual transmission car, it is crucial to master the timing of gear shifting. Shift gears when the engine speed is around 2000 rpm, first reduce the throttle and then press the clutch, so the clutch will not be forcibly disengaged, and then shift gears. A manual transmission (MT), also known as a manual gearbox, requires manually moving the gear lever to change the gear meshing device inside the transmission, thereby altering the gear ratio to achieve the purpose of shifting.

6

5

Share

How to Determine if a Tire is Underinflated?

To determine if a tire is underinflated, you can: 1. Visually inspect all four tires to see if any appear noticeably flat; 2. Use a tire pressure measurement device, such as a handheld tire pressure monitor or an onboard automatic tire pressure display, to accurately measure the tire pressure; 3. Install a tire pressure monitoring system to continuously monitor the tire pressure in real-time. Tires are circular elastic rubber products mounted on various vehicles or machinery that roll on the ground. They are often used under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during operation. Therefore, tires must possess high load-bearing capacity, traction performance, and cushioning properties.

13

3

Share

How to Play USB Songs in Lavida Car?

Which manufacturer produces the Haval H6?

What is the BMW 5 Series Maintenance Schedule and Items?

How to Use the Engine Auto Start-Stop Function?

What tires are used for the 2013 Cruze?

What is the speed range for each gear?

How to Determine if a Tire is Underinflated?

What is the fuel consumption of the old Reiz?

What is the actual fuel consumption of the Mondeo?

What is the fuel tank capacity of the Baojun 360 in liters?

How to Turn Off an Electric Vehicle That Can Move Without Inserting a Key?