How to play music from a USB drive in Chery Tiggo 8?

1 Answers
Diane
07/29/25 3:21pm
To play music from a USB drive in Chery Tiggo 8: Locate the USB port, then insert the USB drive containing music into the USB port. On the central control unit, switch the input medium to USB. Here is more information about Chery Tiggo 8: 1. The Tiggo 8 is a mid-size SUV under Chery, equipped with two engines: a 1.5-liter turbocharged engine and a 1.6-liter turbocharged engine. 2. The 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 230 Nm, with a maximum power output at 5500 rpm and a maximum torque range from 1750 to 4000 rpm. This engine features multi-point fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. It is paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission. 3. The 1.6-liter turbocharged engine produces 197 horsepower and a maximum torque of 290 Nm, with a maximum power output at 5500 rpm and a maximum torque range from 2000 to 4000 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum cylinder head and block. It is paired with a 7-speed dual-clutch transmission.
Was this review help?
8
1
Share
More Forum Discussions

Where is the battery located in a Mercedes GLK?

The battery of the Mercedes GLK is located on the right side of the engine compartment and can be found by opening the hood. Below are some maintenance tips for car batteries: Avoid prolonged parking: The car battery will self-discharge when left unused for an extended period, so it's best to drive the vehicle at least once a week for a minimum of 20 minutes to allow the battery to recharge while driving. Close windows before turning off the engine: The power windows and sunroof rely on the battery for operation, so it's advisable to close all windows before turning off the engine rather than after, or even using the long-press lock button to close windows after leaving the car. Keep the battery clean and tidy: Regular inspections are an effective way to extend the lifespan of your car battery. Use a professional battery terminal brush or an old toothbrush to clean dust and corrosion from the positive and negative terminals. Apply petroleum jelly or a fatty substance to the contact surfaces to create a protective layer.
10
4
Share

What Causes the Audi to Report Sensor Reference Voltage A Too Low?

Audi reports sensor reference voltage A too low because the voltage is 5.03V, and the voltage at T6L/2 is 39V. Similarly, measurements of each wire from the accelerator pedal to the engine control module show normal conductivity, with no grounding or power short-circuiting. Below are the specific causes and solutions: Specific Causes: The P064200 fault symptom is that the engine fails to start. Sensor reference voltage A not only supplies power to the throttle angle sensor and accelerator pedal position sensor 1 but also to the engine speed sensor G28, intake camshaft position sensor G40, fuel rail pressure sensor G247, boost pressure sensor G31, and intake temperature sensor G299. Solutions: Measure the power supply to G28/G40/G247/G31/G299 separately, all at 5.03V. Disconnect all the above sensor connectors, and the power supply to the throttle and accelerator pedal position sensor 1 remains at 0.29V.
1
1
Share

Changan Lingxuan Engine Model?

Changan Lingxuan's engine model is JL478QEA. The Changan Lingxuan is an MPV launched by Changan Automobile. Below is some information about the Changan Lingxuan: 1. This model offers two powertrain options, equipped with a 1.6L naturally aspirated engine and a 1.5T turbocharged engine, respectively. 2. The 1.6L engine delivers a maximum power of 92kW and a maximum torque of 160Nm. The 1.5T engine produces a maximum power of 115kW and a maximum torque of 225Nm. The transmission system paired with the engines includes a 5-speed manual, 6-speed manual, and 6-speed automatic transmission. 3. The Changan Lingxuan has body dimensions of 4730mm in length, 1795mm in width, and 1730mm in height, with a wheelbase of 2760mm, and features a 7-seat layout.
7
5
Share

Should You Press the Accelerator When Starting on a Slope?

Starting on a slope does not require pressing the accelerator. The reasons for stalling during a slope start are as follows: 1. The car stalls immediately after releasing the foot brake, mainly because the left foot releases the clutch too quickly, without staying at the semi-engaged position or staying for too short a time. 2. During a semi-engaged start, if the handbrake is not released when reaching the semi-engaged point, the car will stall. When practicing slope starts, pay attention to the following points to effectively prevent stalling: 1. Slowly lift the left foot to the semi-engaged position and keep it still. In other words, as the left foot is slowly lifted, the car will gradually shake. When the shaking becomes more pronounced, the left foot is at the semi-engaged position—keep it still at this point. 2. Keep the left foot still and slowly release the foot brake with the right foot. The car will then move forward slowly. 3. After the car has moved forward a certain distance, slowly release the left foot from the clutch, and the car will smoothly ascend the slope.
20
0
Share

What is the reason why the fuel tank cap of Lexus LS500h cannot be opened?

Possible reasons include rust or jamming of the fuel tank cap, motor failure, loss of elasticity in the switch spring, or freezing due to cold weather. There are three points to note when installing a fuel tank: 1. Storage location: The fuel tank storage location must be safe to prevent fire. The fuel tank or oil drum should be placed separately in a visible area, appropriately far from the diesel generator set, and smoking is strictly prohibited. 2. After placement: The highest oil level should not exceed 2.5 meters above the base of the diesel generator set. If the oil level in a large fuel depot is higher than 2.5 meters, a daily fuel tank should be added between the large fuel depot and the diesel generator set to ensure that the direct fuel delivery pressure does not exceed 2.5 meters. Even when the diesel generator set is shut down, fuel is not allowed to flow into the diesel engine through the fuel inlet pipe or injection pipe by gravity. 3. Resistance requirements: The resistance at the fuel port must not exceed the specified value for all diesel generators. This resistance value is based on the fuel tank being half full.
5
3
Share

How many liters of fuel can a Volkswagen Lavida hold?

According to data, the maximum fuel tank capacity of the Volkswagen Lavida is 55 liters, and it can generally be filled with about 50 liters of fuel. When the fuel warning light comes on, the Lavida can still travel approximately 50 kilometers, so it is important to find a gas station for refueling promptly to avoid running out of fuel completely. The refueling process for the Volkswagen Lavida is as follows: 1. Press the left side of the fuel tank to open the fuel cap. 2. Unscrew the fuel tank cap counterclockwise. 3. After removing the fuel tank cap, place it on the fuel tank cover. 4. Insert the fuel nozzle into the fuel filler opening. 5. Begin refueling. When the fuel nozzle shuts off for the first time, the tank is full. Stop refueling to prevent overflow. 6. Wait for 5 seconds before pulling the fuel nozzle out of the filler opening to prevent residual fuel from dripping around the opening. 7. Replace the fuel tank cap and ensure it is tightly secured. 8. Close the fuel cap until you hear a 'click' sound.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.