How to Permanently Disable the Civic's Auto Start-Stop?

What Causes the Volkswagen Passat to Jerk During Startup?

The Volkswagen Passat jerking during startup, especially when cold, is generally caused by a dirty throttle body. Carbon buildup can lead to the throttle valve not opening and closing smoothly, affecting the accuracy of the air-fuel mixture parameters, or sensors failing to provide accurate feedback to the servo. Cleaning the throttle body usually resolves the issue. Here are the main reasons why the Passat jerks during startup: 1. Excessive Engine Carbon Buildup: The jerking during startup in the Passat may be due to excessive carbon buildup in the engine. Cleaning the throttle body primarily addresses unstable idling and stalling. When there is too much carbon buildup in the combustion chamber, it increases the engine's compression ratio, creating multiple hot spots that can cause pre-ignition and knocking. This shortens the engine's lifespan and significantly reduces its power and fuel efficiency. 2. Carbon Buildup in the Fuel Injectors: Carbon deposits in the fuel injectors can cause uneven fuel distribution among the cylinders, leading to engine shaking or stalling. Excessive carbon buildup on the spark plugs can cause them to misfire or stop working altogether, resulting in engine vibrations. Carbon buildup in the throttle body can lead to unstable idling, reduced power, or even engine shutdown. Additionally, it's important to check whether the idle control valve has excessive carbon buildup, as this could also contribute to the issue.

20

4

Share

What is the national regulation on the scrapping age for pickup trucks?

According to regulations, pickup trucks are classified as light-duty trucks and must be scrapped when they reach 15 years of service or 600,000 kilometers of mileage. However, some regions have slightly relaxed these rules nowadays, allowing continued use as long as the vehicle passes annual inspections, even if it has reached the age or mileage limit. Additionally, some modified pickups, such as those with covered cargo beds, are classified as multi-purpose passenger vehicles, thus qualifying for passenger vehicle treatment and no longer subject to mandatory scrapping age restrictions. Application process: Before registering a new vehicle, various insurances must be purchased, vehicle purchase tax and additional taxes must be paid, and an application form must be filled out. Special vehicle inspections must be completed, and after passing the inspection, the vehicle can be registered for normal use. Special vehicles can be categorized by structure into box-type special vehicles, tank-type special vehicles, dump-type special vehicles, etc., and by industry into sprinkler trucks, garbage trucks, police cars, armored trucks, ambulances, etc. Scrapping subsidies: The maximum subsidy for scrapping diesel pickup trucks can reach 40,000 yuan per vehicle. Some regions still implement the scrapping subsidy standards for National III vehicles, while in areas with conditions, market trading platforms can be utilized to provide appropriate subsidies to owners who scrap National III and below emission standard vehicles and purchase new ones.

4

1

Share

Is Car Crystal Coating Good or Not?

Car crystal coating is beneficial for the car paint. Car crystal coating provides a reliable paint sealing technology that efficiently and durably protects the car paint, preventing environmental factors from affecting the color of the paint. The concept of car crystal coating was introduced to differentiate it from waxing and sealing, as it uses inorganic substances like silicon dioxide to form an isolation layer on the car paint surface through the action of high-molecular polymers. This isolation layer has functions such as UV resistance, oil resistance, and hydrophobicity, thereby protecting the paint surface. Functions of car crystal coating: 1. Scratch resistance: The high hardness of diamond crystals can prevent most minor scratches and has self-recovery elasticity. 2. Corrosion resistance: The ultra-fine nano-crystal layer of diamond crystals isolates the paint from the external environment, effectively preventing oxidation and acid rain corrosion. 3. No cracking: Diamond crystals resist UV rays, extreme temperatures, and strong temperature adaptability, preventing cracking or peeling. 4. Easy cleaning: The strong fiber network of diamond crystals fills the tiny pores on the paint surface, achieving a mirror-like effect and making it easier to clean and maintain. 5. Anti-static: Diamond crystals contain anti-static agents, making the paint surface less likely to attract dust. 6. Enhanced brightness: Diamond crystals have a crystal structure similar to diamonds, increasing light refraction and making the car surface brighter with a crystal-clear paint finish. 7. Strong water repellency: The low surface tension of diamond crystals repels water droplets, providing super water repellency and preventing water adhesion.

8

1

Share

What Happens When the Idle Speed is Unstable?

Unstable idle speed in a car is mainly manifested by the fluctuation of the tachometer needle up and down, pointing unstably, moving up and down, often accompanied by idle vibration. Unstable idle speed can be considered one of the most common engine faults, which can range from minor to severe. Under normal circumstances, the engine idle speed is fixed, with the specific level depending on the tuning of the particular model. Generally, a higher idle speed leads to relatively higher fuel consumption, but an idle speed that is too low can cause the engine to vibrate or even stall. Below is relevant information about unstable idle speed: 1. Oil residue and carbon deposits in the throttle body, dirty intake manifold: A clogged intake manifold can cause idle pull, while carbon deposits or oil in the throttle body are the most common causes of unstable idle speed. Carbon deposits in the throttle body can affect its opening, influencing the intake air volume, causing the engine speed to fluctuate erratically after a cold start, being very unstable and accompanied by strong vibrations. 2. Weak sparks from faulty spark plugs: Spark plugs can also accumulate carbon deposits, which can be cleaned to restore their activity, but some spark plugs may be nearing the end of their lifespan, leading to decreased performance. Weak sparks from spark plugs in individual cylinders can affect the car's performance. It is known that spark plug faults can cause the car to exhibit "misfire" symptoms, but minor faults in spark plugs of individual cylinders can lead to unstable idle speed symptoms.

13

1

Share

What is the appropriate tire pressure for front car tires?

According to the regulations and requirements of the international GBT2978-2008 standard, the standard tire pressure for tires is 2.4-2.5 bar. Tire pressure reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. In this case, simply perform a tire pressure reset. Tire pressure sensor damage: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation valve. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only a new replacement part can be installed.

10

3

Share

Which Geely models use Volvo engines?

Geely models such as the Binyue, Borui GE, and Geely's plug-in hybrid vehicles use Volvo engines. More details are as follows: 1. Engine: Geely's plug-in hybrid models are equipped with a 1.5T three-cylinder engine. Specifically, the Borui GE plug-in hybrid version features a powertrain consisting of a 1.5T three-cylinder turbocharged engine, an electric motor, a battery pack, and a 7-speed DCT, complemented by a 48V mild hybrid system. The engine delivers a maximum power of 180 horsepower, while the iBSG motor provides a maximum power of 16 horsepower and a maximum torque of 50 N·m. The official combined fuel consumption is stated as 5.8L/100km.

6

0

Share

How to Permanently Disable the Civic's Auto Start-Stop?

What Causes the Volkswagen Passat to Jerk During Startup?

What is the national regulation on the scrapping age for pickup trucks?

Is Car Crystal Coating Good or Not?

What Happens When the Idle Speed is Unstable?

What is the appropriate tire pressure for front car tires?

Which Geely models use Volvo engines?

How Often Should the Spark Plugs on a Toyota Corolla Be Replaced?

How Long is the Validity Period of the Driving Skill Test Certificate?

What is the use of the S gear?

Is a car that has been in stock for 5 months considered a stock vehicle?