How to Perform Reverse Parking?

[VictoriaMarie]

The operation method for reverse parking is as follows: 1. Adjust the left and right rearview mirrors: When reversing, adjust the rearview mirrors to a suitable angle for yourself to conveniently observe the ground markings. When you can see the rear door handle and wheels in the rearview mirror, it indicates that the mirrors are well adjusted; 2. Check the rearview mirrors: It is essential to look at the rearview mirrors during reverse parking, and you may need to learn how to correctly view them. You can observe whether the distance between the car body and the markings is parallel by looking at the rearview mirrors; 3. Find the distance between the car body and the sideline: The requirement for reverse parking is that the distance between the vehicle on the starting line and the roadside line should be about 1.5 meters. This distance should not be too large or too small. If it is too large, the wheels are likely to cross the line when the vehicle enters the parking space; 4. Control the speed: There are certain requirements for the speed during reverse parking, and you must never drive too fast.

[VonEvelyn]

When I first got my driver's license and was learning to reverse into a parking space, I almost scraped the car next to me several times. Looking back now, it was because I was too impatient. The instructor taught me to drive the car to about 2 meters in front of the parking space, parallel to the spot, then shift into reverse and slowly back up. At this point, the steering wheel should be turned all the way to the left (assuming the parking space is on the right) until the car body is halfway into the space at an angle, then quickly straighten the steering wheel and continue reversing. The key is to use the rearview mirror to check the parking lines and observe the distance; if the car has a reverse parking sensor, listen for the sound alert when the gap is too small and brake to adjust. Practice more by trying a few times in an empty parking lot, don’t rush, and first get familiar with your vehicle’s turning radius. Remember, safety comes first—keep your foot on the brake while reversing and always check blind spots.

[DelAndrew]

After years of driving, reversing into parking spaces has become second nature. The secret lies in observation and slow maneuvers. First, choose a parking spot and assess if the size is suitable. Position the car slightly to the left in front of the space, then shift into reverse and start backing up while slowly turning the wheel toward the parking space. Use the rearview mirror and rear window to gauge the angle changes. When half of the car is in, gradually straighten the wheel to adjust the position. I recommend getting out of the car during practice to check the distance in front and behind. Use lights more often at night for assistance. With accumulated experience, you'll be able to park smoothly in one go.

[McVictoria]

I think the primary concern when reversing into a parking space is avoiding accidents, ensuring clear visibility with no blind spots. Before operating, get out of the car in advance to check the surroundings, making sure there are no children or small animals near the parking spot. Don't accelerate when reversing; use the lowest gear to back up slowly, and make small steering wheel adjustments rather than large turns. Utilize the reversing camera to assist with trajectory, but also rely on the rearview mirror to judge the position of the parking lines. Safety comes first, technique second—only when parking is safe can you truly relax.