···
Log in / Register

How to Perform Parallel Parking?

6Answers
OPeter
07/29/2025, 05:43:58 AM

Steps for parallel parking: 1. Before entering the parking space, first adjust the distance between the right side of the car and the parking space, generally 30cm to 50cm is appropriate; 2. Observe the right rearview mirror and stop when the front horizontal line of the parking space appears in the right rearview mirror; 3. Shift into reverse gear, observe the right rearview mirror, and when the front horizontal line of the parking space disappears downward in the right rearview mirror, quickly turn the steering wheel fully to the right; 4. Observe the left rearview mirror, and when the inner corner of the parking space appears, quickly turn the steering wheel back to the left to straighten; 4. Observe the left rearview mirror, and when the left rear wheel is about to touch the line (do not cross the line), turn the steering wheel fully to the left; 5. Observe the front of the car and stop when it is straight, shift into neutral, engage the handbrake, turn on the left turn signal, shift into first gear, release the handbrake, and start to exit the parking space.

Was this review help?
104
Share
Alexia
08/12/2025, 07:13:23 AM

When I perform parallel parking, I usually start by observing the surroundings to ensure the mirrors are clean, then drive the car parallel to the front car, maintaining a distance of about half a meter, and signal with the turn indicator. Next, I shift into reverse gear, slowly back up while watching the right-side mirror, and when the right mirror aligns with the rear of the front car, I turn the steering wheel fully clockwise to continue reversing. Once the rear of the car is in position, I gradually straighten the steering wheel while glancing at the left-side mirror to ensure the car is parked straight and parallel to the curb. Throughout the process, it's important to control the speed and avoid going too fast, especially during rain or at night, as slippery roads can affect stability. Beginners can master it with a few more practices. After parking, I always check the tire positions to avoid encroaching on the sidewalk and prevent any trouble.

Was this review help?
18
Share
Expand All
RebeccaRose
10/06/2025, 03:29:43 AM

I prefer parallel parking like this: Find an empty spot, drive slowly alongside the car in front, leaving some space to avoid scratches. Turn on the left turn signal to alert cars behind, then start reversing. First, align the rear of my car with the car in front using the mirrors, then quickly turn the steering wheel to the right. When half of the car is in the spot, straighten the wheel to align the car, and finally adjust the position to park steadily. Don’t rush—keep the speed slow, especially on residential streets where kids might run around. I always listen for surrounding sounds to avoid accidents. More practice makes the operation smoother and saves a bit of fuel too.

Was this review help?
15
Share
Expand All
DelVivienne
11/19/2025, 09:09:14 PM

When parallel parking, I first ensure the surroundings are safe by checking the mirrors and blind spots, proceeding only when no people or cars are present. I drive forward to align parallel with the front car, maintaining a distance of about 30 cm. After signaling, I start reversing, turning the steering wheel when reference points like trees or road signs align. Once in position, I adjust the angle to ensure the car is stable, making the entire process concise and efficient.

Was this review help?
16
Share
Expand All
StViolet
01/09/2026, 10:45:47 PM

I use a little trick for parallel parking: first, I stop the car parallel to the front vehicle with a gap of about 40 cm, then turn on the signal and start reversing. The key is to align the reference points using the side mirrors, such as turning the steering wheel fully when the right mirror aligns with the front wheel of the other car, then slowly straighten the wheels while controlling the speed. Extra caution is needed on rainy days or slopes to maintain distance and avoid scratching the car body.

Was this review help?
6
Share
Expand All
Braxton
04/06/2026, 03:32:43 AM

For parallel parking, I believe the key lies in the details: turn on the indicator after approaching the parking space, ensure there are no pedestrians or obstacles, then park parallel to the car in front with a safe distance of about 50 cm. Next, shift into reverse and slowly back up, checking the mirrors to find the right moment to steer into the spot. Once parked, briefly check the tire position and overall balance to ensure the car isn’t blocking the road. Remember, practicing more on crowded city streets and getting used to observing moving vehicles can boost overall driving confidence.

Was this review help?
9
Share
Expand All
More Q&A

Can a Motorcycle Be Started with a Car Battery When It's Dead?

Whether a motorcycle can be jump-started using a car battery depends on the voltage of the motorcycle battery: 1. If both the motorcycle and car batteries are 12v, jump-starting is possible; 2. If the motorcycle battery is 6v, jump-starting is not advisable. Directly connecting a 6v motorcycle battery to a 12v car battery in parallel can easily damage the motorcycle's electronic components. About batteries: The battery supplies power for starting the car and operating the electronic devices inside. If a car battery is depleted, it can prevent the car from starting normally. If the battery voltage is too low, it can make the car difficult to start. When a motorcycle battery is dead, it should be removed and charged using a charger. In emergency situations, the motorcycle can be jump-started, but the battery must be charged afterward to prevent sulfation and oxidation.
102
Share

Why Are Joint Venture Cars More Expensive?

There are four main reasons for the higher prices of joint venture cars: 1. Insufficient domestic production capacity: Limited output leads to higher prices. 2. Intellectual property issues: Core technologies such as car engines and transmissions need to be imported from abroad. 3. Brand premium: Chinese brands initially developed in the low-end market, creating an impression of low price and low quality among consumers. In contrast, most joint venture brands introduced mature products, leveraging their technological and managerial advantages to dominate the market. 4. Foreign automakers charge substantial technology transfer fees for models authorized to joint venture manufacturers: Additionally, foreign parties control the procurement of parts for joint venture brands, leading to high costs due to large quantities of imported components, raw materials, and machinery, which in turn increases the operational costs of joint ventures.
118
Share

Is There a Difference Between Off-Road Vehicles and SUVs?

Differences between off-road vehicles and SUVs: 1. Different vehicle structure design: Off-road vehicles are designed with a body structure more suitable for rough terrains, featuring a non-load-bearing body, high ground clearance, and often equipped with adjustable suspensions for better stability. SUVs, primarily used for urban driving, focus more on fuel efficiency, thus paying less attention to body structure. 2. Different power systems: Off-road vehicles are typically equipped with large-displacement naturally aspirated engines to provide ample power for off-road conditions, making hill climbing and rough terrain traversal easier. Urban SUVs, on the other hand, often use turbocharged engines with higher power output, providing noticeable acceleration during highway driving. 3. Vehicle comfort: In terms of comfort, off-road vehicles are inferior to SUVs. Off-road vehicles prioritize ruggedness and safety, resulting in stiffer body construction and seats designed for safety rather than comfort. Additionally, off-road vehicles tend to be noisier, making them less suitable for long drives. SUVs, commonly used for daily commuting or leisure trips, emphasize comfort, offering spacious interiors and a fatigue-free driving experience even during extended periods.
111
Share

What to Do If Vehicle Documents Are Lost?

Here are the main methods for reissuing lost vehicle documents: 1. Reissuance of the registration certificate: You need to go to the vehicle management substation for vehicle inspection and photography, and then collect it at the substation. Required documents include the original ID card of the vehicle owner, and a temporary residence permit is also needed for non-local residents. It can be obtained on the same day and cannot be handled by an agent. Additionally, if the owner is a corporate entity, the original organization code certificate and a power of attorney with the official seal are required. 2. Reissuance of the car purchase invoice: For vehicles older than five years, the owner only needs to write a commitment letter on-site. For vehicles less than five years old, you need to obtain a copy from the 4S store, have the 4S store stamp it with the financial seal, and then go to the Industrial and Commercial Bureau to re-stamp the industrial and commercial verification seal. This must be handled by the owner personally and cannot be done by an agent. 3. Reissuance of the second-hand vehicle transfer ticket: Bring the registration certificate to the transaction hall where the transfer was originally processed to obtain a query slip. This can be handled by an agent. 4. Reissuance of the insurance policy: For compulsory traffic insurance reissuance, bring the owner's ID card and driving license to the designated branch of the insurance company. It can also be processed after the transfer with the new driving license, new owner's ID card, registration certificate, and transfer ticket. For commercial insurance, the method is the same as for compulsory traffic insurance, but some insurance companies stipulate that reissued commercial insurance can only be used and not canceled.
104
Share

Can I use the manual toll lane with ETC installed?

With ETC installed, you can use the manual toll payment lane, but you need to remove the ETC card and hand it to the toll collector. When using the manual lane, be sure to stop the vehicle, take the card out of the OBU device, and let the toll collector swipe it to obtain exit information. When passing through the toll station, proceed in an orderly manner and avoid cutting in line to prevent congestion in the manual lanes. ETC is a non-stop electronic toll collection system, also known as an automatic road tolling system. It is specifically designed for toll roads and is commonly used on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. ETC charging principle: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the vehicle's onboard electronic tag (installed on the windshield) and the microwave antenna in the ETC lane, the system uses computer networking technology to settle payments with the bank, allowing vehicles to pass through toll stations without stopping. This is all based on the principle of "pass first, deduct later." Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass through toll stations without stopping; Reduced wear and tear: Saves costs by minimizing frequent starts and stops, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase traffic flow by 2-3 times, making traditional ETC faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." The plan also sets a target of "50% ETC usage rate for road passenger vehicles by 2020." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will focus on promoting ETC use for trucks and exploring deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of at least 10 meters to prevent automatic sensing and payment for the vehicle ahead, especially if its ETC device is faulty or nonexistent. The recognition speed for ETC lanes is 20 km/h. Driving too fast may result in failure to read the vehicle's device information and subsequent charging failure. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, may render the tag invalid. In such cases, take it to the bank where the ETC card was issued or the highway service office for inspection. If the issue is not due to human interference, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may cause charging failure. Follow the instructions of on-site staff to use the manual MTC lane and pay with cash or card. Thick windshields may cause poor signal reception. This is particularly relevant for vehicles that have had their windshields replaced after accidents or for those with modified front windshields.
101
Share

How Often Should the Aisin 6AT Transmission Fluid Be Changed?

It should be replaced after approximately 3 years or around 60,000 kilometers of driving. If the vehicle frequently operates in congested environments, the transmission fluid can be changed at around 50,000 kilometers. For vehicles often driven on highways, the transmission fluid can be replaced at around 80,000 kilometers. Additional details are as follows: 1. Transmission: A transmission is a mechanism used to alter the speed and torque from the engine. It can either fix or change the gear ratio between the output and input shafts, also known as the gearbox. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also featuring a power output mechanism. Most transmission mechanisms use ordinary gear transmission, while some employ planetary gear transmission. Ordinary gear transmission mechanisms typically involve sliding gears and synchronizers. 2. The stepped transmission is the most widely used type: It utilizes gear transmission with several fixed gear ratios. Depending on the gear system used, there are two types: fixed-axis transmissions (ordinary transmissions) and rotating-axis transmissions (planetary gear transmissions). Passenger cars and light to medium-duty trucks usually have transmissions with 3-5 forward gears and one reverse gear, while heavy-duty trucks with combined transmissions may have more gears. The number of transmission gears refers to the number of forward gears.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.