How to perform overtaking in Subject 3 driving test?

[OJames]

The procedure for overtaking in Subject 3 is: When you hear the voice prompt "Please complete the overtaking maneuver", turn on the left turn signal for more than 3 seconds while checking traffic conditions through the left rearview mirror. After confirming it's safe, steer left to enter the overtaking lane. After passing the vehicle being overtaken and maintaining a safe distance, turn on the right turn signal for more than 3 seconds while checking traffic through the right rearview mirror. When safe, return to the original lane. If you receive the overtaking prompt but conditions aren't suitable, you may stop and wait until conditions permit before completing the maneuver.

[DiPresley]

During the overtaking maneuver in Subject 3, based on years of instructional experience, I believe safety details should be emphasized. First, observe the rear situation by scanning the mirrors to confirm no vehicles are approaching rapidly before proceeding. Then, activate the left turn signal for at least 3 seconds—the signal must be clear. Checking blind spots by turning your head before changing lanes is crucial; failing to perform this adequately during the test may result in point deductions. Maintain stability during overtaking—avoid sudden acceleration and proceed at a steady speed. After completing the maneuver, don’t rush back to the original lane; turn on the right signal, recheck blind spots, and confirm safety before returning. The entire process should be unhurried—examiners focus on standardization and preventive awareness. I recommend practicing urban road simulations regularly to develop good habits. Also, remember not to miss or prematurely turn off signals—cultivating these habits is beneficial for real-world driving.

[DeJuniper]

In my eyes, safety comes first, so overtaking in the third subject requires thorough risk management. As soon as the test instruction is given, I first check the left and right rearview mirrors to ensure there are no vehicles behind, then turn my head to check the blind spot, confirming clear visibility before starting. The turn signal must be activated at least 3 seconds in advance to give a clear signal to other vehicles. Maintain a steady speed during the lane change to avoid sudden acceleration that could cause danger. After overtaking, don't return too close; wait until there's a safe gap before turning on the right signal and proceeding. The key detail is to observe with full concentration, as even a small mistake could lead to an accident. I usually simulate various weather scenarios to train my reactions, and the core of passing the test smoothly is patience—don't rush for time.

[MacDaniel]

During my driving test for Subject 3, the overtaking part went quite smoothly. When the instruction came, I checked the rearview mirror and signaled left for a few seconds if there was space. After turning my head to check the blind spot, I smoothly changed lanes. After passing the car, I didn't immediately move back; instead, I signaled right first and then checked the rearview mirror and turned my head again. Just keep the movements natural, as the examiner pays attention to whether you perform all the checks completely. Don't be nervous and take your time; passing in one go isn't difficult.

[LeAdalynn]

Pursue efficiency, and strategy is key for overtaking in Subject 3. Upon hearing the command, immediately assess: How far is the vehicle behind? Any obstacles ahead? Quickly turn on the signal and count for 3 seconds, while swiftly checking the blind spot. Complete the lane change and overtaking smoothly with minimal errors, and follow the same process when returning, all within a short time. The goal is to reduce repetitive operations to save energy, such as planning the use of signals in advance. I rely on repeated practice to speed up reaction time, ensuring the test is completed smoothly without rework. Just remember not to forget to turn off the signal lights.

[Lena]

As a beginner, I find the overtaking maneuver not too difficult. The instructor taught us a three-step method: first, observe the rear safety using the rearview mirror, then signal for a few seconds to indicate the intention, and finally, execute the lane change smoothly. Throughout the process, don't forget to check the blind spot by looking over your shoulder to confirm low risk. During the test, the examiner pays attention to details and norms, such as deducting points for not signaling. When practicing on my own, I drive more on flat roads to familiarize myself with the rhythm. The key is not to rush, safety comes first.