How to perform maintenance reset on SAIC Maxus G50?

2 Answers
SabrinaMarie
07/30/25 12:57am
SAIC Maxus G50 maintenance reset steps are as follows: 1. Turn on the ignition switch, hold down the "Reset Button" with one hand, and turn off the ignition switch with the other hand; 2. Keep holding the "Reset Button" until the clock and mileage on the instrument panel completely disappear (the instrument panel should display nothing, black screen), then release the button; 3. Hold the "Reset Button" again with one hand, then turn on the ignition switch. At this time, the maintenance reminder on the instrument panel will flash, continue to hold the "Reset Button" without releasing. Wait until the maintenance reminder stops flashing, then release the button; 4. Turn on the ignition switch or start the vehicle again, the reset is successful.
Was this review help?
13
5
Share
LeEmersyn
08/15/25 6:24am
Having driven for many years, I've developed a habit of doing things myself. Resetting the maintenance reminder for the SAIC Maxus G50 is quite straightforward, mainly involving operations through the dashboard buttons. First, park the car and turn off the engine, but do not start it. Instead, turn the ignition switch to the second position, and all the dashboard lights will illuminate. Then, press the TRIP button on the dashboard or use the navigation keys on the steering wheel to switch between menus until you find the 'Maintenance Reminder' or a similar option. Confirm the reset, and you're done. After resetting, the indicator light will turn off, and the system will recalculate the next maintenance interval. Doing this yourself saves time and avoids the hassle of queuing at the 4S shop, while also reminding you to change the oil and perform inspections on time. Maintenance reset is crucial; forgetting to do it might make the indicator light flash continuously, leading you to mistakenly think there's a problem while ignoring actual component wear. Last time, my friend's car didn't get reset, resulting in delayed maintenance and nearly causing engine trouble. I recommend resetting it right after each maintenance and developing a habit of regular checks for peace of mind while driving. Since details may vary by model year, it's best to keep the manual handy just in case.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

How often should Oshan tires be replaced?

Oshan tires generally need to be replaced after driving 50,000 to 80,000 kilometers. Since tires are rubber products, they are prone to aging. If the tires have been in use for 3 years since production but haven't reached the recommended mileage, it's advisable to replace them for safety reasons. Below is more information about Oshan: 1. Development Model: Changan Oshan Auto relies on the research and development resources of Changan Auto Group and consistently adheres to the development model of 'self-reliance and independent innovation.' 2. Front Grille: The front grille and lower air intake of Oshan both feature a U-shaped design with chrome accents. The elongated and upward-slanting headlights complement the raised lines on the hood. 3. Headlights: The interior now includes blue accents to enhance visual appeal. The sides of the body feature crisp, straight lines, while the rear maintains a clean and streamlined appearance.
6
5
Share

What Maintenance Does a BMW Need at 20,000 Kilometers?

The main maintenance items at 20,000 kilometers include the following: 1. Replace the engine oil and oil filter (10,000-kilometer maintenance interval), air filter (20,000-kilometer maintenance interval). 2. Replace the fuel filter (20,000-kilometer maintenance interval), cabin air filter (20,000-kilometer maintenance interval). 3. Depending on the vehicle condition and environment, carbon deposit cleaning may also be considered. Here is some additional information about car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 2. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
17
3
Share

Can the Peugeot 307 be powered off when replacing the battery?

Yes, you can power it off, and just reset the time after replacement. Here are the specific details about the Peugeot 307: 1. Power: The Peugeot 307 is equipped with a 1.6-liter naturally aspirated engine, with a maximum horsepower of 117 hp, a maximum power of 86 kW, and a maximum torque of 150 N·m. 2. Fuel consumption: According to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the Peugeot 307 has a combined fuel consumption of 7.3L/100km. 3. Transmission: The Peugeot 307 offers a choice between a 5-speed manual and a 4-speed automatic transmission. In terms of suspension, the front suspension of the Peugeot 307 is a MacPherson independent suspension, and the rear suspension is a deformable crossbeam type with a lateral stabilizer bar.
5
0
Share

How to Remove the Navigation System in Kia K3?

Removal method for Kia K3 navigation system: Remove the decorative panel, unscrew the left-hand side screw, pry out the clips of the decorative strip, then disconnect the wiring harness to remove the navigation assembly. Based on positioning, the car navigation system can provide the optimal driving route, road conditions ahead, and information on the nearest gas stations, restaurants, and hotels through a multifunctional display. Below is an introduction to the car navigation system: The car GPS navigation system consists of two parts. One part includes the GPS receiver and display device installed in the car, and the other part is the computer control center, which communicates via positioning satellites. The computer control center is authorized and established by the motor vehicle management department, responsible for monitoring the dynamics and traffic conditions of designated vehicles within its jurisdiction. Therefore, the entire car navigation system has at least two major functions: vehicle tracking and monitoring, and driving guidance.
14
4
Share

Does the Levin have an anti-collision beam?

Toyota Levin cars are equipped with a rear anti-collision beam. Here is more information about the anti-collision beam: 1. The anti-collision beam is a device used to absorb collision energy when the vehicle is impacted. It consists of a main beam, an energy absorption box, and an installation plate connected to the car. Both the main beam and the energy absorption box can effectively absorb collision energy during low-speed collisions. 2. It minimizes the damage to the vehicle's longitudinal beams by reducing the impact force, thereby playing a protective role for the vehicle. 3. Anti-collision beams are divided into front and rear anti-collision beams. The front anti-collision beam is usually connected to the vehicle's longitudinal beams to protect rear components such as the radiator, reducing losses in minor accidents. The materials used are generally steel, fiberglass, or aluminum alloy, with a thickness of 1.5 to 3mm. The front anti-collision beam is usually covered with a layer of foam supporting the outer plastic skin, mainly serving to protect pedestrians.
2
1
Share

What are the steps to reset the maintenance light on the Refine M3?

Refine M3 maintenance light reset method: 1. Turn off the ignition switch. 2. Press and hold the button on the combination meter. 3. Turn the ignition switch to the "ACC" position to power on the vehicle. 4. Keep pressing the button on the combination meter for more than 10 seconds. 5. The small wrench icon on the dashboard will disappear, indicating the maintenance light has been reset. Below is relevant information about the maintenance light: 1. The vehicle dashboard is equipped with a maintenance light. If the owner does not perform maintenance after exceeding 12,000 km, the maintenance light will flash continuously to remind the owner to perform timely maintenance. 2. Before the vehicle undergoes maintenance, do not reset the maintenance light just because it remains on, as this will make the accumulated maintenance mileage on the odometer inaccurate. 3. When the trip meter reaches 9,600-12,000 km, the maintenance light will illuminate for 2 seconds upon turning on the ignition switch.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.