How to Perform Left Reverse Parking?

1 Answers
MacAiden
07/25/25 5:52am
After getting in the car, adjust the seat and fasten the seat belt - these are basic requirements. If the vehicle body is not straight, straighten it when entering the test area. Note that the front wheels must cross the control line, otherwise it will result in immediate failure. During reverse parking, pay attention to the reference points. When the vehicle enters the parking space and the body is parallel to the sideline, quickly straighten the steering wheel. Stop when the lower edge of the left rearview mirror aligns with the parking line, shift to 1st gear, and exit to complete the left reverse parking operation.
Was this review help?
6
0
Share
More Forum Discussions

How many liters of engine oil should be added to a Volkswagen Polo?

Volkswagen POLO requires approximately 3.5L of engine oil. To confirm whether the amount of oil added is sufficient, you can check the oil dipstick after adding the oil. There are two marks on the dipstick: a maximum mark and a minimum mark. The normal oil level should not exceed the maximum mark or fall below the minimum mark; it should be between these two marks. Additional information: 1. Method for checking the oil level: After adding the oil, start the vehicle and then turn it off. Wait for 3 minutes before checking the oil level. This is because when changing the oil, the oil filter is also replaced, and the new oil filter initially contains no oil. After starting the vehicle, oil will flow into the oil filter. Waiting for 3 minutes allows the oil to settle into the oil pan, ensuring a more accurate reading. Remember not to check the oil level on a slope, as the vehicle's tilt will cause the oil in the oil pan to tilt as well, leading to an inaccurate measurement. 2. Effects of too much or too little oil: Overfilling with oil can interfere with the normal operation of the crankshaft and increase the vehicle's fuel consumption. Insufficient oil will reduce the effectiveness of the lubrication cycle, accelerating wear on internal engine components. Therefore, it is essential to maintain the oil level within the specified range.
16
0
Share

What brand is Haima Happin?

Haima Happin belongs to the Haifuxing series, which is the original Familia generation. After minor modifications to the front face and taillights, it was launched under the name Familia Heartbeat Edition equipped with a 4G18 engine. On June 6, 2007, it was officially renamed Haifuxing. Below are the relevant details: 1. Exterior: The Haifuxing's design continues the classic styling of the old 323, maintaining the original body size with slight detail changes. Its pentagonal grille is slightly enlarged, and the seagull-shaped emblem extends horizontally to both sides, appearing simple yet powerful. With dimensions of 4365mm in length, 1695mm in width, and 1410mm in height, the Haifuxing's body size is not particularly outstanding among its peers, but its 2610mm wheelbase exceeds most A-segment cars. 2. Power: The Haifuxing's performance is not particularly outstanding. With a maximum power of 74Kw/6000rpm and a maximum torque of 133N·m/4500rpm, it is at best mid-level compared to other engines in the same market segment.
10
2
Share

What is the fuel tank capacity of the Haval H1 in liters?

Haval H1 has a fuel tank capacity of 45 liters, which is the officially announced data. The Haval H1 uses 92-octane gasoline, with a fuel consumption of 5.8 to 6.4L per 100 kilometers. A full tank can cover a distance of 703 to 776 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is designed to allow the fuel to expand when the temperature rises without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
4
3
Share

What Kind of License is a Motorcycle License?

Operating a heavy motorcycle requires a B2 license. This license permits driving large trucks. For professional motorcycles, specialized job training and operation certificates are also required, but these are not managed by traffic authorities. To legally ride on public roads, one must apply for and obtain permission from the traffic department. Below is an introduction to the examination subjects: 1. Subject One: Road traffic safety laws, regulations, and related knowledge test (Subject One) – written exam, computer-based, with a perfect score of 100, and a passing score of 90 or above (including 90). 2. Subject Two: Venue driving skills test (Subject Two) – conducted on-site with actual vehicles. Results are categorized as pass or fail only. The test includes five mandatory items performed in sequence: reversing into a garage, parallel parking, S-curve driving, right-angle turns, and hill starts and stops. The perfect score is 100, with a passing score of 80 or above (including 80). 3. Subject Three: Road driving skills test (Subject Three) – conducted on highways or simulated venues with actual vehicles. The perfect score is 100, with passing scores of 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject Four: Safe and civilized driving knowledge (Subject Four) – written exam, with a perfect score of 100 and a passing score of 90 or above (including 90).
14
0
Share

Can You Make a U-turn on a Ramp?

You cannot make a U-turn on a ramp; you must exit the ramp to make a U-turn. A ramp, also known as an approach, is the connecting section between the upper and lower roads of an overpass or elevated road, or the section connecting a highway with adjacent service roads. Below are definitions of various types of ramps: 1. Entrance and exit ramps: These are auxiliary connecting sections for entering and exiting main roads, also known as approaches. In engineering terms, they typically refer to short sections that provide vehicle access between main roads and adjacent service roads, or other main roads via bridges/slopes/connectors, as well as collector-distributor roads. They are key components in constructing road interchange channels. 2. Up and down ramps: These are auxiliary connecting slopes for entering and exiting elevated roads, either ascending or descending, commonly referred to as 'interchange ramps.' Note: Both types (items 1 and 2) often incorporate collector-distributor road designs. 3. Direct ramps: These place the left-turn lane on the left side. 4. Indirect ramps: These place the left-turn lane on the right side, using a loop to connect to other roads. 5. Semi-direct ramps: Similar to indirect ramps but without loops, instead using longer, more undulating elevated roads as connecting ramps.
2
0
Share

Is Chery's CVT simulated 9-speed technology mature?

Chery's CVT simulated 9-speed technology is mature. Here is an extended introduction: History of Chery: Chery can be considered the earliest domestic automaker among all Chinese brands to start developing core components like transmissions. Chery's research and development of transmissions can be traced back to 2003, when Chery established Chery Precision Machinery Company, whose main business was transmissions. In the early stages of the company's establishment, Chery Precision Machinery recruited a large number of technical personnel from Australia's DSI company. It can be said that in terms of transmissions, Chery is undoubtedly the pioneer among domestic automakers.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.