How to Pay Purchase Tax for Company Vehicles?

1 Answers
DelAyla
07/25/25 12:44pm
Bring the vehicle owner's identity proof, vehicle price proof, vehicle qualification proof, and the invoice of the vehicle. Providing the third copy of the vehicle invoice will suffice. Go to the local competent tax authority to declare and pay the tax.
Was this review help?
2
2
Share
More Forum Discussions

What does it mean when a motorcycle engine seizes?

Motorcycle engine seizure refers to the occurrence of obvious longitudinal mechanical scratches and abrasions on the inner wall of the cylinder within the movement range of the piston rings. In severe cases, adhesive wear occurs, causing difficulties in engine starting or spontaneous stalling. The specific reasons for engine seizure are as follows: 1. Piston assembly-related causes: (1) Piston ring clearance is too small. (2) Piston pin protrusion. (3) Piston-to-cylinder clearance is too small or too large. (4) Severe carbon buildup on piston rings. (5) Severe piston misalignment. 2. Cylinder liner-related causes: (1) The roundness and cylindricity tolerances of the cylinder liner exceed the allowable range, greatly reducing the sealing between the piston and cylinder liner. High-temperature gas in the cylinder leaks downward, destroying the oil film between the piston and cylinder wall, leading to seizure. (2) Cylinder liner deformation during assembly. 3. Usage-related causes: (1) Air filter leakage, reducing filtration efficiency, allowing dust, sand, and other impurities in the air to be sucked into the cylinder, causing abrasive wear. (2) Poor running-in. (3) Frequent cold starts. (4) Engine overheating.
14
5
Share

Can the ETC device be turned off when not in use?

When the ETC card is not being used on highways, it can be removed. However, if you need to use the highway, you must reinsert the card in advance. Note that you should not remove the card while driving on the highway, as this will cause the ETC to malfunction. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Promotes low-carbon travel, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC faster, more efficient, and more technologically advanced. Compared to license plate payment, ETC technology is more mature and advantageous. How ETC works: Through dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, the system uses computer networking technology to process backend settlements with banks. This allows vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees.
16
2
Share

How to Turn On the Left and Right Turn Signals?

First, nowadays, the turn signal switch in cars is generally installed on the left side of the steering wheel. The operation method can be summarized as "up for right, down for left," so saying "up for left, down for right" is incorrect. Drivers can imagine the turn signal lever as the steering wheel—turn it in the direction they intend to go. The "up for right, down for left" method aligns with general habits: pushing down (counterclockwise) is commonly understood as turning left, while pushing up (clockwise) is interpreted as turning right. The steps to activate the turn signals are as follows: 1. If you observe a need to turn while driving, be sure to activate the turn signal about 10 seconds in advance to alert vehicles behind you, allowing them time to take appropriate actions, such as slowing down or stopping, to avoid collisions or even rear-end accidents. However, it's also best not to activate the turn signal too far in advance, as this might cause visual fatigue for drivers behind you, potentially leading to "road rage." The timing should be carefully judged by the driver. 2. As a signal light, the turn signal's primary role during daily driving is to inform surrounding vehicles of your intended direction change, prompting them to yield and avoid collisions. Therefore, whether turning, changing lanes, overtaking, starting, or parking, whenever the vehicle's wheels deviate from the original lane, the turn signal should be activated in advance. This is a fundamental principle of safe driving. In daily driving, drivers often overlook using turn signals in situations such as entering roundabouts, merging from ramps onto highways, or in parking lots—scenarios where accidents due to neglected turn signals frequently occur.
17
5
Share

What is the three-word mnemonic for traffic lights?

The three-word mnemonic for traffic lights is 'Red light stop, green light go, yellow light wait.' First, understand the traffic conditions at traffic lights: when the red light is on, the intersection is prohibited from passing; when the green light is on, the intersection is allowed to pass; when the yellow light is on, vehicles that have not passed the stop line are also prohibited from passing under the current new traffic regulations. Therefore, to pass through an intersection with traffic lights, you must drive through when the light is green; otherwise, you may be penalized. There are two types of traffic lights: full-circle traffic lights and arrow-shaped traffic lights. Full-circle traffic lights: When passing through such an intersection, you need to wait until the light turns green to proceed straight, turn left, turn right, or make a U-turn, provided there are no prohibitions for left turns, right turns, or U-turns on the road. If there is no prohibition against turning right on red, you can directly turn right at the intersection. Arrow-shaped traffic lights: When each direction has its own arrow light, you must wait for the green light in your direction of travel before passing through the intersection.
15
2
Share

Why won't the Trumpchi GS8 start suddenly?

Here are the reasons why the GAC Trumpchi GS8 won't start suddenly: 1. Lack of fuel, the fuel gauge shows below the red line; 2. Dead battery, possibly due to prolonged headlight use without turning them off or the battery's lifespan has expired. It is generally recommended to replace the battery every 2 years; 3. Vehicle circuit failure caused by installing xenon headlights, high-power audio systems, DVD players, etc.; 4. Incorrect gear position. For automatic transmission vehicles, the gear must be in P or N position when starting. If it's in R or D position, the car won't start. Additionally, some manual transmission vehicles won't start if the clutch is not depressed.
9
2
Share

What is the bulb model for the headlights of the Lingdong car?

The bulb model for the Lingdong headlights is H11. Below are the specific details of the Lingdong: 1. The body dimensions of the Lingdong are 4610mm in length, 1800mm in width, and 1450mm in height, with a wheelbase of 2700mm. 2. Despite the fastback design, the rear space performance remains excellent, and configurations such as rear air conditioning vents and armrest cup holders are more user-friendly. Additional information: Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the external image of a car owner but are also closely linked to safe driving at night or under adverse weather conditions.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.