How to Pay Personal Tax When Renting a Personal Vehicle to a Company?

What is the repair method for a generator not generating electricity?

Generator not generating electricity repair methods are: 1. Without dismantling the generator, conduct on-vehicle testing to determine if there is a fault; 2. Use a multimeter in voltage mode for detection; 3. When there is no ammeter on the car dashboard, use an external DC ammeter for detection. The function of the generator is: when the engine is running normally, it supplies power to all electrical equipment except the starter, and simultaneously charges the battery. The generator is the main power source of the car, and its working principle is: when an external circuit energizes the excitation winding through the brushes, a magnetic field is generated, and the claw poles are magnetized into N and S poles.

9

4

Share

Can I drive a new car without the vehicle license?

You cannot drive a new car without the vehicle license. Here are the relevant details: 1. Temporary solution: You can apply for a temporary vehicle license at the vehicle management office or vehicle management team to drive on the road, but note that you cannot drive on highways. The temporary license is valid for 7 or 14 days. 2. Penalty for unlicensed driving: Those caught driving without a license will be fined a small amount. Additionally, the traffic management department may impose a detention of up to 15 days. According to the "Road Traffic Safety Law," driving a motor vehicle without obtaining a motor vehicle driver's license, or when the license is revoked or suspended, will result in a small fine imposed by the public security traffic management department.

9

4

Share

How to Check the Condition of a Solenoid Valve?

Methods for checking the condition of a solenoid valve: First, supply the controlled medium (pressurized liquid or gas, with the pressure value at the midpoint of the solenoid valve's operating range) to the solenoid valve. Then, energize the solenoid coil. If the controlled medium changes from open to closed or from closed to open, the solenoid valve is functioning properly; otherwise, there is an issue. A solenoid valve is an electromagnetically controlled industrial device used as an automated basic component for fluid control, acting as an actuator, and is not limited to hydraulic or pneumatic applications. Solenoid valves are categorized into three main types based on their operating principles: direct-acting solenoid valves, semi-direct-acting solenoid valves, and pilot-operated solenoid valves.

6

1

Share

What are the effects of low tire pressure in car tires?

The effects of low tire pressure in car tires include: 1. Increased friction coefficient with the road surface; 2. Causes the steering wheel to feel heavy and may lead to unsafe driving conditions such as veering; 3. Increases the movement of various parts of the tire, leading to excessive rolling and abnormal heat generation; 4. Reduces the functionality of the cord and rubber, potentially causing delamination or cord breakage, and excessive friction with the rim, resulting in damage to the tire bead area; 5. Increases tire body deformation, making the tire sidewalls prone to cracking and flexing movements. The recommended actions for low tire pressure are: 1. Check for any leaks or damage to the tire; 2. Use an onboard air pump to inflate the tire.

2

4

Share

What is the working principle of engine supercharging?

The working principle of engine supercharging is: by increasing the air pressure in the intake manifold, overcoming the interference resistance of the valves, and increasing the fuel injection volume, the engine's working energy is enhanced. Mechanical supercharging mainly relies on belt drive, and the speed of the internal blades is completely synchronized with the engine speed. The output of a mechanically supercharged engine increases with the rise in engine speed. Engine supercharging refers to addressing the issue of low intake efficiency in naturally aspirated engines at high-speed ranges. It can be divided into: 1. Centrifugal supercharger; 2. Roots-type supercharger; 3. Screw-type supercharger.

6

3

Share

What causes shaking during rapid acceleration but not during gradual acceleration?

The reasons for shaking during rapid acceleration but not during gradual acceleration are: 1. Fuel system issues: Fuel line blockage causing poor fuel supply or fuel pump failure. To diagnose fuel pump problems, disconnect the fuel line and check the flow rate and volume of fuel; 2. Electrical issues: Check if the timing is accurate, inspect whether the spark plugs have aged, if the gaps are uniform, and if the gaps have changed; 3. Mechanical reasons: Check the engine's operating condition for any abnormal sounds, inspect the belt's working condition for looseness. A car engine consists of five major systems and two main mechanisms. The five systems are the fuel supply system, cooling system, lubrication system, ignition system, and starting system. The two mechanisms are the crankshaft and connecting rod mechanism and the valve train mechanism.

6

2

Share

How to Pay Personal Tax When Renting a Personal Vehicle to a Company?

What is the repair method for a generator not generating electricity?

Can I drive a new car without the vehicle license?

How to Check the Condition of a Solenoid Valve?

What are the effects of low tire pressure in car tires?

What is the working principle of engine supercharging?

What causes shaking during rapid acceleration but not during gradual acceleration?

Why did the Phaeton stop production?

How to Start an Audi A4?

What should vehicles do when the traffic light turns green at a congested intersection?

What is the meaning of Audi's logo?