How to Pass the Subject 2 Driving Test?

2 Answers
KingstonMarie
07/25/25 4:57pm
It is crucial to maintain a positive mindset and avoid giving up, striving to pass next time. Learn from the experience and analyze the reasons for your failure. Discuss any doubts with your instructor or peers to ensure you don't repeat the same mistakes. The cause may likely be overlooking certain details, such as incorrect sitting posture, poor clutch control, or misaligned reference points, which require focused practice and refinement.
Was this review help?
19
5
Share
VonBentley
08/11/25 9:59pm
I just passed the Subject 2 driving test last year, and I believe the key is to practice each item more. For reversing into the garage, get familiar with the position of the lines in the rearview mirror and practice several times to find the right feel. For parallel parking, pay attention to the timing of turning the steering wheel—don't rush or be too slow. For curve driving, control the speed and look further ahead. Find a reliable coach and practice every day. I practiced continuously for half a month, two hours each day, and reviewed any mistakes. Mindset is also very important—don't be afraid of making mistakes and build confidence through mock tests. Additionally, understand the test rules, such as not crossing lines or stalling the engine, as these details determine success or failure. When it's time for the actual test, take a deep breath and do what you practiced—don't overthink it. In short, hard work plus calmness, and Subject 2 won't be difficult at all!
Was this review help?
15
1
Share
Expand All
More Forum Discussions

How to Deal with a Locked Steering Wheel on a Haval H6?

Haval H6 steering wheel lock release method: you can hold the steering wheel with your left hand and gently shake it, while simultaneously turning the key with your right hand to unlock it. Below are the detailed steps: 1. First, insert the key and press the brake, then turn the steering wheel left and right. 2. Although the steering wheel is in a locked state at this time, it can still be slightly turned a little when you try to steer. 3. While turning the steering wheel, turn the key to complete the steering wheel unlocking procedure. If you are not familiar with this, it may not succeed the first time, but don't worry. Remove the key and repeat the above steps 1-2 times, and you should be able to unlock it successfully. 4. If the vehicle is equipped with a one-key start function, the steps are basically the same as above, except for the step of inserting the key. First, press the brake, then turn the steering wheel left and right, and finally press the start button to start the car.
17
1
Share

How Many Liters of Engine Oil Does the Envision Require?

The Envision requires approximately 4.5 liters of engine oil. After adding the oil, it's advisable to check the oil dipstick for the exact level. Here's some additional information about engine oil: 1. Engine oil, also known as engine lubricant, serves multiple functions such as reducing friction, aiding in cooling, preventing leaks, protecting against rust and corrosion, and cushioning impacts. It is often referred to as the 'lifeblood' of a car. 2. The oil dipstick is used to measure the static oil level, indicating whether the engine oil volume is within the proper range. Standard dipsticks have clear upper and lower limits, and the oil level should ideally be between these two marks. The middle position is optimal. It's important to note that more oil isn't necessarily better. Higher oil levels can actually increase engine resistance (since the crankshaft continuously agitates the oil in the oil pan for splash lubrication). Ideally, the oil level should be slightly below the middle mark. This minimizes engine resistance and fuel consumption while maintaining stable lubrication performance.
17
4
Share

Where to Add Water to the Volkswagen Bora's Radiator?

To add water to the Volkswagen Bora's radiator, simply open the radiator cap. The vehicle's radiator, commonly referred to as the water tank, has the water filling port located at the top of the radiator, while the drain port is at the bottom. It is recommended to use antifreeze for filling, though in special circumstances, tap water can be used. The maintenance steps for the car radiator are as follows: 1. Park the vehicle and turn off the engine. Wait for the coolant temperature to drop, then open the expansion tank and add radiator cleaner. 2. Start the engine and let it idle for 5-10 minutes after the radiator fan starts working. 3. Turn off the engine and remove the front bumper of the vehicle. Ensure all fixing screws are loosened before removal, and carefully detach from both ends towards the center to avoid breaking any clips. 4. Once the coolant has completely cooled, flush out the radiator cleaner along with the coolant, and finally replace it with new engine coolant.
17
1
Share

How to Deal with a Locked Electronic Parking Brake in the Santa Fe?

Here are the methods to handle a locked electronic parking brake in the Santa Fe: 1. First, fasten your seatbelt, start the car, shift to D gear, and gently press the accelerator. Usually, the locked state of the electronic parking brake will be automatically released. 2. If the issue persists after the above steps, it indicates a fault in the electronic parking brake system, and it is recommended to visit a repair shop for inspection. Below is an introduction to the electronic parking brake: 1. The car's electronic parking brake, also known as the Electronic Parking Brake (EPB), is marked with a "P" button on the vehicle. It works on the same principle as the traditional mechanical handbrake, achieving parking brake control through the friction generated between the brake disc and brake pads. However, the control method has evolved from the mechanical handbrake to an electronic button, making operation more convenient. 2. The electronic parking brake uses electronic control to achieve parking brake technology. Its working principle is the same as the mechanical handbrake, both controlling parking brake through the friction between the brake disc and brake pads, but the control method has changed from the previous mechanical handbrake lever to an electronic button.
15
4
Share

Which Volkswagen models are suitable for modification?

Among Volkswagen models, the Golf, Polo, Lamando, and Scirocco are suitable for modification, but the most common choice is the Golf. Here is more information about modifications: 1. Before modifying a licensed vehicle, it is necessary to register and declare the modification to the vehicle management office. Modification can only proceed after approval from the vehicle management office. After the modification is completed, the modification change procedures must be completed at the vehicle management office. 2. According to Article 6 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," changes such as body color, engine replacement, chassis replacement, substandard body quality, illegal operation, and household registration changes must be declared. Other small parts produced by regular manufacturers that do not affect performance do not need to be declared. As long as the size of the replaced rims is consistent with the original, the appearance can be changed as desired.
14
2
Share

How to reset the maintenance light on Karry K60?

To reset the maintenance light on Karry K60, first turn off the ignition switch, press and hold the trip reset button, then turn on the ignition switch and release the button. The maintenance light cycle indicator will be cleared. Below is relevant information about the maintenance light: 1. The maintenance light is a reminder function set by the manufacturer to alert the owner to perform maintenance at certain mileage or time intervals. It appears in the form of a dashboard or screen message or indicator light. Resetting the maintenance light means clearing the reminder information after maintenance is completed, essentially resetting the message. 2. The original purpose of the car maintenance light is to remind the owner to perform maintenance as soon as possible. Therefore, the owner should promptly visit a 4S shop for maintenance. After maintenance, the 4S shop will use a diagnostic tool to reset the maintenance light. The quickest and most accurate method to clear the maintenance reminder light is to use a diagnostic tool. Since individual car owners generally do not have this equipment, it is recommended to reset the reminder light after maintenance at a 4S shop or visit an external 4S shop to clear it.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.