How to Pass the Reverse Parking Test in Subject 2?
4 Answers
Reverse parking is judged based on the following criteria: failure to follow the prescribed route or sequence results in disqualification. Other disqualifying factors include the vehicle body crossing the line, failure to park properly, or stopping midway. If the reverse parking is not completed within 210 seconds, it also results in disqualification. Violating any of these standards will result in a direct deduction of 100 points, leading to failure in the Subject 2 test. Below are the practice steps for reverse parking: Preparation Phase: Drive the vehicle to the designated test area. The key reference point is when the front wheels of the vehicle cross the control line. Reversing: After crossing the control line, stop the vehicle, shift into reverse gear, and begin reversing. Control the speed to ensure the vehicle moves slowly. Observe the lower edge of the left rearview mirror. When the lower edge of the left rearview mirror intersects with the sensing line, quickly turn the steering wheel fully to the right. Parallel Parking: With the steering wheel fully turned, observe the right rearview mirror. You will first see the left corner of the parking space. Continue reversing until the right corner of the parking space and the right wheel are 30 cm apart. Keep the steering wheel steady and continue reversing. Stopping: After observing the distance between the rear wheel and the corner of the parking space and determining if any adjustments are needed, observe the timing when the vehicle body becomes parallel to the parking space lines. Once the vehicle body is parallel to the lines, quickly straighten the steering wheel to allow the vehicle to drive straight into the parking space. Ensure the left and right distances are equal after the vehicle is parked. Keep the steering wheel steady and continue reversing. Observe the left rearview mirror, and when the lower edge of the left rearview mirror is parallel to the boundary line, quickly press the brake to stop. Exiting the Parking Space: The entire reverse parking process includes exiting the parking space. When exiting, maintain a steady speed and drive straight forward. When the vehicle's hood is parallel to the boundary line, quickly turn the steering wheel fully to the left. Wait until the vehicle crosses the stop line, then proceed with left-side parking, following the same steps and methods as the right-side parking described above.
I just passed the Subject 2 test, and the key points for passing the reverse parking are very clear: the car must be completely reversed into the parking space, with neither the front nor rear tires touching any boundary lines—touching the lines means an immediate fail. The car body must be centered in the space, and the side mirrors must not hit the side poles or any obstacles. The test must be completed within the allotted time, usually around 30 seconds, but exceeding the time doesn’t result in point deduction. The engine must not stall during the operation, and slow speed should be used to adjust direction. During practice, I paid extra attention to checking the wheel positions via the rearview mirrors. Timing starts once the front wheels cross the line before reversing, and the test is considered successful only when the rear of the car aligns with the back of the parking space. These standards ensure safety and driving skills are up to par. I recommend practicing simulated reference points more often to get familiar with the car’s feel and improve success rates—the feeling of passing the test on the first try is absolutely amazing.
I have had my driver's license for ten years. The core requirement for passing the reverse parking test is that all four tires must be completely within the parking lines after the vehicle comes to a full stop, without even slightly touching the edge lines. The car must enter the parking space straight, without hitting poles or objects on either side, otherwise points will be deducted or you will fail directly. The test rules require the entire process to be steady, without sudden braking or stalling. The speed must be slow when reversing, and I control the throttle by pressing the clutch. The time limit is usually within half a minute, and exceeding it results in failure. The key is to adjust the steering wheel through the rearview mirror, making small corrections to avoid common mistakes like turning too sharply. It is recommended to practice hundreds of times in an empty space, memorize the reference points, and it will be much easier on the test day, reducing the risk of redoing the test.
To pass the reverse parking test, remember these strict rules: no crossing lines, no hitting poles, no stalling, and all tires must be inside the parking lines. During the exam, clearly observe the reference points, reverse slowly while adjusting the direction, and don't rush. Aim to complete it in about 30 seconds; exceeding this will result in failure. Frequently check the wheel positions using the rearview mirrors and make minor adjustments if needed. During practice, simulate real scenarios to get familiar with the car's width and distance—you'll get the hang of it after a few tries. The key is to park safely and precisely; avoid mistakes, and you'll pass.
