How to Park with Automatic Electronic Parking Brake?

1 Answers
Etta
07/29/25 2:01pm
Parking steps for automatic electronic parking brake: After braking, the driver shifts to N gear, pulls the electronic handbrake after shifting, then shifts to P gear after releasing the brake, and finally turns off the engine. Automatic parking is an automatic braking function that simplifies operations, especially in heavy traffic conditions. Automatic parking must rely on an intelligent braking system, such as the ESP braking control system. When activated and the vehicle comes to a complete stop with the indicator light appearing on the dashboard, the driver can release the brake pedal. When the accelerator is pressed, the automatic parking will be automatically released. The electronic handbrake and the automatic parking system are not the same thing; they are two separate systems. Automatic parking is not achieved through the electronic handbrake.
Was this review help?
12
4
Share
More Forum Discussions

What is the reason why the Wuling Rongguang P0122 cannot be cleared?

Wuling Rongguang P0122 cannot be cleared possibly due to a short circuit to ground in the throttle position sensor. Below is relevant information about the Wuling Rongguang vehicle: 1. Manufacturer: The manufacturer is SAIC-GM-Wuling. SAIC-GM-Wuling Automobile Co., Ltd. was established on November 18, 2002. It is jointly funded by China's SAIC Motor Corporation Limited, General Motors Company of the United States, and Guangxi Automobile Group Co., Ltd., with its headquarters located in Liuzhou, Guangxi. 2. Parameter configuration: The model is equipped with a 1.2-liter 76-horsepower four-cylinder naturally aspirated engine and a 1.5-liter 99-horsepower four-cylinder naturally aspirated engine, paired with a five-speed manual transmission. The model is positioned as a micro van, adopting a mid-engine rear-wheel-drive layout. The front suspension type is MacPherson independent suspension, and the rear suspension type is longitudinal leaf spring. The vehicle uses a monocoque body structure.
12
5
Share

What are the reasons for the insufficient cooling of the Wuling Zhiguang's air conditioning?

Here are the specific reasons for the insufficient cooling of the Wuling Zhiguang's air conditioning: 1. Insufficient or low refrigerant: A common reason for the car air conditioning not cooling is insufficient or low refrigerant, which may be caused by minor leaks. 2. Loose drive belt of the car air conditioning compressor: Car cooling relies on refrigerant, and the transmission of refrigerant depends on the air conditioning compressor, while the drive belt is an important moving part that drives the compressor. If the drive belt is loose, the compressor may slip during operation, leading to reduced transmission efficiency, decreased compressor speed, and reduced refrigerant delivery, resulting in the car air conditioning not cooling. 3. Unqualified refrigerant and refrigeration oil: Excessive impurities in the refrigerant and refrigeration oil can also cause clogging of the car air conditioning filter, leading to the air conditioning not cooling, increased resistance, and reduced refrigerant flow to the expansion valve, resulting in insufficient cooling capacity. 4. Moisture infiltration in the refrigeration system: If moisture infiltration in the car air conditioning refrigeration system causes insufficient or no cooling, then the desiccant or drying tank in the car air conditioning should be replaced.
8
4
Share

How often should the Lavida tires be replaced?

The frequency of replacing Lavida tires depends on specific usage conditions, as different wear levels will result in varying replacement mileages. Generally, tire replacement should be determined based on the tread pattern. Under normal driving conditions of 25,000 to 30,000 kilometers per year, durable tires can be replaced at around 70,000 kilometers, while comfort-oriented tires are recommended to be replaced at 50,000 to 60,000 kilometers. If the annual mileage is less than approximately 10,000 kilometers, it is advisable to replace the tires every three to four years. Tires should be replaced under the following circumstances: When the tire wears to the wear limit indicator: Usage must be discontinued, meaning the tread depth is below 1.6 millimeters. Tire aging: If there are numerous small cracks at the base of the tread grooves or on the tire sidewalls, the tire should be replaced promptly, regardless of whether it is new or old. Tires with deformed treads or damaged beads: Tires that have been damaged due to driving under-inflated, tires corroded by chemicals, or tires with bulges should not continue to be used.
6
5
Share

How often should the tires of a Livina be replaced?

The tires of a Livina generally need to be replaced every 50,000 to 60,000 kilometers. Additionally, if cracks appear on the sidewalls of the tires, the tread depth is below 1.6 millimeters, or the tread has reached the wear indicator mark, replacement is also necessary. Here is some relevant information about tires: 1. Check the tire's expiration date: The sidewall of the tire will have a four-digit number indicating the manufacturing date, with the first two digits representing the week and the last two digits representing the year. Generally, tires should not be used for more than 3 years or exceed 60,000 kilometers in mileage. 2. Pay attention to the sidewalls: As the tire rubber gradually ages, deep cracks may appear on the sidewalls. However, as long as the sidewalls have not been impacted and the cords are not broken, the tires can continue to be used. The triangular mark on the tire sidewall can help the owner locate a protrusion in the tread grooves, which indicates the actual wear limit of the tire. That value should be greater than 1.6 millimeters.
8
0
Share

What is the fuel consumption of the Sylphy?

The fuel consumption of the Sylphy is generally around 4.9-6.1L per 100 kilometers. The following are the factors that affect a car's fuel consumption: 1. Advanced automotive technology is crucial for fuel consumption: The vehicle's own weight, the car's design, and the engine's thermal efficiency are three key automotive technologies related to fuel consumption. 2. Good vehicle condition is the fundamental reason for fuel efficiency: In addition to paying attention to the cleanliness of the car, it is also important to maintain the car correctly, such as lubricating the wheel hub bearings on time, regularly replacing the air filter element, and promptly checking the condition of the car's brakes. 3. Incorrect driving habits can lead to a significant increase in fuel consumption: As cars become more widely used in households, there are more non-professional drivers, and some drivers' bad habits can lead to increased fuel consumption. 4. Road conditions determine a car's fuel consumption: According to experts, driving in urban conditions can increase fuel consumption by 20% compared to driving on a test track. The biggest factor affecting fuel consumption in urban driving is frequent starts, stops, gear shifts, accelerations, and decelerations caused by traffic congestion. Driving on roads with poor surface conditions can also increase fuel consumption.
7
3
Share

What causes the EPS light to come on in a car?

This is an electronic power steering warning. EPS refers to the computer board of the car's steering wheel. If it lights up, it indicates a fault in the computer board. The EPS light indicates whether the vehicle's electronic and mechanical systems are functioning normally. Under normal circumstances, it should be off. When there is a fault or abnormality in the vehicle's electronic or mechanical systems, this light will illuminate. Do not take chances when this light comes on, as the vehicle's electronic and mechanical systems cover multiple parts of the car, and any malfunction in any part poses a safety hazard. The advantages of EPS are as follows: 1. High conversion efficiency: The Electronic Power Steering system, hereinafter referred to as EPS, is a mechanical and electrical connection with a conversion efficiency of up to 90%, whereas hydraulic systems only have a conversion efficiency of 60%. 2. Good steering returnability: EPS has a simple structure, low internal resistance, and excellent returnability, providing the best steering return characteristics and improving the car's handling stability. 3. Low energy consumption: For hydraulic steering systems, the hydraulic power pump operates continuously when the engine is running, increasing the engine load and raising the car's fuel consumption by about 4%. In contrast, EPS only activates the steering motor when steering is required, thereby reducing engine load and saving fuel.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.