How to Park Correctly?

2 Answers
AlessandraMarie
07/28/25 9:49pm
After the vehicle comes to a complete stop, firmly pull the parking brake lever and shift the transmission lever to neutral. Release the clutch pedal and brake pedal. Turn off the turn signal, switch off the ignition as needed, and shut down the engine.
Was this review help?
5
5
Share
IsabelleMarie
08/12/25 2:24am
When I first started learning to drive, parking made me especially nervous, and I often misaligned when backing into a parking space. Later, I learned a simple method to handle it. First, locate the parking spot, turn on the indicator light, and slowly approach to confirm the position. When reversing, keep a close eye on the rearview mirror and adjust the steering wheel bit by bit to avoid the wheels crossing the line or hitting obstacles. If parking on a slope, remember to turn the wheels toward the curb to prevent rolling. After parking, don't forget to engage the handbrake and shift to P mode, and close the windows and lock the doors before turning off the engine. Beginners will get the hang of it after a few more practices—find an open space and take it slow, no need to rush.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What Does It Mean to Release a Car from Mortgage?

Releasing a car from mortgage refers to the process of canceling the mortgage registration for a vehicle purchased with a mortgage loan, which means the mortgage right is terminated at the vehicle management office. Below are the procedures and required documents for releasing a car from mortgage: Procedures for releasing a car from mortgage: First, you need to apply to the vehicle management office where the mortgage was registered. Second, submit the required documents to complete the mortgage release registration. Finally, after the vehicle management office reviews and approves the application in accordance with regulations, they will archive the relevant documents, input the information, endorse, and issue the vehicle registration certificate, completing the mortgage release process. Required documents for releasing a car from mortgage: Identity proofs of the vehicle owner and the mortgagee. If the process is handled by an agent, the agent's identity proof is also required. If the agent is an organization, the original identity proof of the handling personnel and a written authorization from the vehicle owner must be submitted. The vehicle registration certificate. If the mortgage is released through a court mediation, ruling, or judgment, the effective "Mediation Agreement," "Ruling," or "Judgment" issued by the court, along with the corresponding "Notice of Assistance in Execution," must be submitted. If the mortgagee is an organization that has been deregistered, proof of the organization's deregistration must also be submitted, which can include a query certificate issued by the industrial and commercial department and proof of the mortgagor's repayment.
8
1
Share

Will Stage 1 ECU Tuning Damage an Audi S4?

Generally, it won't damage the car. The principle is that the engine's operation under various conditions such as RPM, gear, load, and temperature corresponds to data on air intake, fuel injection quantity, ignition timing, etc., which is recorded in the ECU as a database called "M.A.P." ECU tuning essentially involves modifying this "M.A.P." database. By altering the data controlling the engine, it affects engine operation to achieve desired effects within the engine's tolerable limits. The impacts of ECU tuning on a car are as follows: 1. Higher quality requirements: After ECU tuning, the car will demand higher fuel quality. Using low-quality gasoline may harm the vehicle; 2. Higher temperature requirements: With the engine overclocked post-tuning, an inadequate cooling system could affect engine lifespan; 3. Potential warranty void: Vehicles with modified ECUs may be denied warranty coverage by dealerships.
12
0
Share

What causes the window glass of Haval H6 to shake when rolling up and down?

Haval H6 window glass shaking has two possible reasons: 1, the glass curvature is incorrect, causing interference and shaking when halfway rolled up. 2, the glass bracket is loose, or the window regulator is loose. Suggestion: Visit a professional auto glass shop for inspection and determine the cause before repair. Additional information: It is normal for the Great Wall Haval H6 to develop window noises after a certain period of use. Generally, family cars may experience varying degrees of electric window noise after two to three years of use. This is because, over time, the window's outer sealing strips age, leading to poor sealing.
16
4
Share

What is the reason why an automatic transmission car does not move when shifted to R gear without pressing the accelerator?

There may be several reasons why an automatic transmission car does not move when the accelerator is pressed: The clutch is not fully engaged; the handbrake is not released; the gear is stuck and not fully engaged; the clutch friction plate is worn out. The correct driving method for an automatic transmission car: Start the engine with the gear lever in P position, and you must press the brake pedal before shifting from P to other gears. When starting, push the gear lever to a lower gear (i.e., 2 or 1, some may have 3), and after the speed increases to a certain level, shift to D gear for normal driving. If cruising at high speed on the highway, you can use the O/D gear to save fuel. When starting, the following points must be noted: Shift gears only after pressing the brake pedal, and check if the gear lever position is correct; when starting over bumps or steps, it is best to press the brake pedal with the right foot, slightly release the right foot while the car is stationary, and slightly press the accelerator pedal at the same time. Lift the right foot immediately after crossing the step and lightly press the brake pedal to prevent severe shaking of the vehicle; do not let the engine speed be too high when starting. Especially in winter, when the air conditioning rapid acceleration device is working, the idle speed may exceed 1500r/min (usually 1000r/min), which can cause strong vibration and gear impact, leading to a sudden start. Therefore, wait for the engine speed to drop before starting.
2
4
Share

What are the reasons for BMW keyless entry failure?

Reasons for BMW keyless entry failure: 1. The car battery is dead; 2. The key fob battery is dead. Additional information: Car keyless entry system: Abbreviated as PKE (PASSIVE-KEYLESS-ENTER), this product adopts the world's most advanced RFID radio frequency technology and the most advanced vehicle identity coding recognition system. It pioneers the development solution of miniaturized, low-power RF antennas, successfully integrates remote control systems with keyless systems, and maintains traditional vehicle circuit protection. It truly achieves a dual RF system with dual anti-theft protection, providing maximum convenience and safety for car owners.
12
2
Share

Is it mandatory to equip a fire extinguisher in the car?

The Road Traffic Safety Law, Article 21 stipulates that before driving a motor vehicle on the road, the driver should carefully inspect the safety technical performance of the vehicle; it is prohibited to drive a motor vehicle with incomplete safety facilities or components that do not meet technical standards, which may pose safety hazards. According to the 'Safety Technical Conditions for Motor Vehicle Operation' (GB7258-2012), vehicles (excluding three-wheeled vehicles without a cab) should be equipped with a triangular warning sign. Passenger vehicles (those carrying more than 9 people) and school buses must be equipped with fire extinguishers. From this, it can be seen that school buses and passenger vehicles are required to have on-board fire extinguishers, while private cars are not mandated. However, it is still recommended that car owners keep a fire extinguisher in their vehicles as a precaution. The usage method of an on-board fire extinguisher is as follows: 1. In case of a car fire, the first priority is to stay calm, not panic, analyze the situation, and then make a quick judgment. 2. When holding the fire extinguisher, stand at the upwind side of the fire to avoid being scalded, ensuring your own safety before attempting to put out the fire. 3. Pull out the safety pin, hold the nozzle, and grip the pressure handle with the other hand. Aim the nozzle at the base of the flame to quickly extinguish the fire.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.