How to Park at a Right Angle?

1 Answers
AutumnMarie
07/30/25 2:28am
When reversing, pay attention to the 30cm distance between the car body and the corner in the right rearview mirror. If it's less than 30cm, turn the steering wheel back half a turn; if it's more than 30cm, you may easily press against the line when parking. After the car body enters the parking space, observe the left and right rearview mirrors. When the car body is parallel to the side line, quickly straighten the steering wheel. After entering the parking space, observe carefully. If one side of the car body is wider than the other, steer towards that side. When adjusting the car body, pay attention to the parking point. When parking, fully depress the clutch and brake. When exiting the parking space, observe the left and right rearview mirrors. If the car body is not straight, slightly adjust the direction to prevent the car from pressing against the line when exiting.
Was this review help?
10
3
Share
More Forum Discussions

What is the tire size of the Highlander?

The tire size of the Highlander is 245/55R19. Tire specifications are commonly represented by a set of numbers, where the first number indicates the tire section width, and the latter denotes the rim diameter in inches. The Highlander is a midsize SUV with body dimensions of 4890 mm in length, 1925 mm in width, and 1720 mm in height, with a wheelbase of 2790 mm. In terms of power, the Highlander is equipped with a 2.0-liter turbocharged engine across all variants, delivering a maximum power of 220 horsepower and a peak torque of 350 Nm. The maximum power is achieved between 5200 to 5600 rpm, while the maximum torque is available from 1800 to 4000 rpm. It is paired with a 6-speed automatic transmission.
10
4
Share

What Causes the Chevrolet Cavalier to Fail to Start with Needle Shaking?

Here are the specific reasons why the Chevrolet Cavalier fails to start with needle shaking: 1. Fault in the ignition wire section: Issues such as aging ignition wires, incorrect cylinder wire sequence, damaged distributor, or loose spark plug caps may exist. When the engine starts, there is a noticeable sound of the starter working, indicating that the power supply is not a problem and the starter can function normally. It might be due to a blocked fuel line, causing insufficient fuel supply. 2. Incorrect car gear position: Generally, the P or N gear is the starting position for automatic transmission cars. If the gear is in the R position or another position, not only will the car fail to start, but there will also be certain safety hazards. Once an incorrect gear position is detected, adjust it promptly.
11
5
Share

How to Activate Cruise Control in the Highlander?

Method to activate cruise control in the Highlander: Press the control switch to arm the cruise control, accelerate to the desired speed, and then push the control lever downward to set the cruising speed. To accelerate, push the lever upward or press the throttle. To cancel cruise control, pull the lever upward, turn off the main cruise control switch, or press the brake pedal lightly. The Highlander is an SUV produced by Toyota, with dimensions of 4795mm in length, 1910mm in width, and 1760mm in height, a wheelbase of 2790mm, and a fuel tank capacity of 72 liters. In terms of suspension, the front suspension uses a MacPherson independent suspension, and the rear suspension employs an E-type multi-link independent suspension.
13
3
Share

What does traffic violation code 1301 mean?

Violation code 1301 means: Motor vehicle driving against traffic. According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China", the penalty is: 3 demerit points; fine amount: 200 yuan; other penalties: warning. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law. The order from left to right is: the first digit is the behavior classification code, the second digit is the demerit point classification code, the third and fourth digits are the sequential code, and the fifth digit is the item number. First digit: Behavior classification code, indicating the classification code in the Road Traffic Law; Second digit: Demerit point classification code, indicating the classification code for traffic violation demerit points; Third, fourth, and fifth digits: Sequential code, indicating the order of violations within the same behavior classification. For example: 13035—"1" indicates motor vehicle behavior, the second digit "3" indicates 3 demerit points, and "035" indicates the fifth item of the third violation in the 3-point category. Behavior classification code violation descriptions: Codes starting with 1 indicate motor vehicle traffic, e.g., 1003 Codes starting with 2 indicate non-motor vehicle traffic, e.g., 2002 Codes starting with 3 indicate pedestrian or passenger traffic, e.g., 3030 Codes starting with 4 indicate highway traffic, e.g., 4002 Codes starting with 5 indicate other regulations, e.g., 5005 Codes starting with 7 indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008 Codes starting with 8 indicate local regulations of cities (regions, autonomous prefectures, or leagues), e.g., 8606 There are four common ways to check motor vehicle violations: Visit the office halls of traffic branches in various districts and counties to query through touch terminals; Log in to the external service website of the local Public Security Traffic Management Bureau, find the vehicle violation query, enter the license plate number and engine number, and click to query; Call the hotline (area code + 114) to inquire; Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For motor vehicle driving against traffic violations, you can handle them through this app. After logging in, enter the violation processing workflow, complete the process, and make the payment.
2
4
Share

Why does the Envision sunroof open automatically?

Buick Envision's sunroof opening automatically is likely due to a design defect in the sunroof drainage system, which constitutes a quality issue. Below are the specific details about the Envision: 1. Body Dimensions: The Buick Envision Plus measures 4845mm in length, 1883mm in width, and 1695mm in height, with a wheelbase of 2833mm. 2. Powertrain Configuration: The Envision features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 260PS, a maximum torque of 400Nm, and a maximum power output of 191kW. It is paired with a 9-speed automatic transmission.
12
5
Share

What does Volkswagen's AOFF mean?

Volkswagen's AOFF is the button to turn off the automatic start-stop function. How the automatic start-stop function works: By installing an enhanced motor with idle start-stop function on a traditional engine, the engine is completely shut off when the car meets the conditions for idle parking. When the vehicle needs to start moving again, the idle start-stop motor system quickly responds to the driver's start command and rapidly starts the engine, achieving instantaneous connection, thereby greatly reducing fuel consumption and exhaust emissions. The role of the automatic start-stop function: It can reduce exhaust emissions and save fuel. For cars equipped with the automatic start-stop function, when waiting at a traffic light, as long as the battery has sufficient charge and the engine coolant reaches the normal temperature, the system will shut off the engine. If the battery charge is insufficient, the automatic start-stop system will not work.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.