How to Park an Automatic Transmission Car?

1 Answers
ChaseLynn
07/24/25 9:17am
Parking method for automatic transmission cars: 1. Press the brake, wait for the car to come to a complete stop, then shift from D (Drive) to N (Neutral), and engage the handbrake; 2. Turn off the engine, release the foot brake, wait until the vehicle shows no forward or backward movement, then shift from N (Neutral) to P (Park); 3. For cars with mechanical keys, turn the key off and on again, remove the key, and lock the doors. For cars equipped with a one-button start system, simply lock the doors. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, automatic transmission cars have six gear positions, arranged from top to bottom as P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).
Was this review help?
17
0
Share
More Forum Discussions

Can car airbags be installed by oneself?

Car airbags can be installed by oneself. On the market, installing an airbag costs approximately 1000 yuan. Below is a detailed introduction about it: 1. Determine whether your car has a position reserved for airbag installation: 2. Look for a qualified and certified department to install the airbag for your car: At the same time, you must choose an airbag that has been certified by the Automotive Safety Committee and is insured by an insurance company. 3. In fact, it is best not to install it yourself: First, in the event of a major traffic accident involving a vehicle with privately installed safety equipment, the insurance company may refuse to compensate on the grounds that the owner has altered the vehicle's safety structure without authorization. Secondly, the stability and reliability of aftermarket airbags are certainly not as good as those of original factory products.
10
0
Share

What Should Novice Drivers Pay Attention to When Driving?

Novice drivers should pay attention to not driving too fast, using turn signals, and maintaining a safe following distance. Here are the specific precautions to note: Not Driving Too Fast: The speed should not be too fast or too slow; maintaining a speed between 30 to 50 is ideal. If driving too fast, novice drivers may not react quickly enough and may struggle to adapt immediately. Turn Signals: It is essential to learn how to use turn signals proficiently. Remember to signal in advance when turning or changing lanes, letting the vehicles behind know, and only turn the steering wheel after confirming it is safe. Following Distance: Always remember to maintain a sufficient safe distance when driving. Do not follow too closely when there is a vehicle in front, and avoid suddenly slowing down or braking hard when there is a vehicle behind.
6
3
Share

What Causes Engine Bearing Noise?

Engine bearing noise is caused by abnormalities in the crankshaft or connecting rod bearings, or a lack of lubrication. Below are detailed explanations of the causes: Abnormalities in Crankshaft or Connecting Rod Bearings: The cause of engine bearing noise is abnormalities in the crankshaft or connecting rod bearings. In such cases, it is best to immediately stop the engine, call for assistance, and proceed to a 4S shop for inspection and repair. Lack of Lubrication: Engine bearing seizure occurs when the crankshaft or connecting rod bearings experience sintering due to insufficient lubrication or excessive heat wear. This can lead to the crankshaft seizing and forcibly stalling the engine. In severe cases, it may even damage the crankshaft bearing seat, resulting in the complete scrapping of the engine assembly.
17
3
Share

Precautions for Vehicle Lighting?

Precautions for vehicle lighting involve using the appropriate lights in corresponding scenarios. Below are specific precautionary guidelines: Low beam headlights: When a motor vehicle passes through an intersection controlled by traffic signals and makes a left turn, the turn signal should be activated, and low beam headlights should be used during nighttime driving. When a following vehicle is traveling in close proximity to the vehicle ahead in the same direction, high beam headlights should not be used. Low beam headlights should be used when encountering non-motorized vehicles on narrow roads or bridges. High and low beam headlights: When a motor vehicle passes through sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, it should alternately use high and low beam headlights to signal.
16
3
Share

What is the formal name of the gear shift lever?

The formal name of the car gear shift lever is the gear shift lever or operating lever. Related introduction: 1. Function: It is used on the car transmission, and its main function is to support the car's gear shifting. 2. Classification: Common gear shift levers are divided into 1/2 gear shift levers, 3/4 gear shift levers, and 5 gear shift levers. The 5 gear shift lever generally integrates the reverse gear function. 3. Automatic transmission: The automatic transmission does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear according to the driving speed and traffic conditions. The manual transmission requires the driver to manually move the gear shift lever to change the gear meshing position inside the transmission, thereby changing the transmission ratio to achieve the purpose of shifting.
15
2
Share

What are the new models of Audi A1?

Audi has launched new models of the A1. The all-new Audi A1 offers three versions: The 30TFSI and 35TFSI versions are equipped with a 1.0-liter three-cylinder turbocharged engine and a 1.5-liter four-cylinder turbocharged engine, respectively. The A1 has enhanced its appeal to young consumer groups with a more youthful exterior, stronger power, and updated configurations. For the interior, the new car adopts the same layout as the Audi Q3: The front fascia of the new car features a blackened version of Audi's iconic hexagonal grille with a honeycomb pattern inside. The bumper is flanked by air ducts, and the headlight assembly incorporates arrow-shaped LED daytime running light strips.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.