How to operate when hearing 'please turn on the headlights'?

1 Answers
LaEllie
07/29/25 9:34am
Turn the light button on the left side of the steering wheel once to turn on the headlights. The following is a related introduction to car headlights: 1. Concept: Headlights refer to the lighting devices installed on both sides of the front of the car, used for road illumination during nighttime driving. Low beams fall within the category of headlights, and both low beams and high beams are types of headlights. 2. Usage: Headlights must be turned on whenever driving at night. The illumination distance of low beams is approximately 30-40 meters. There are requirements for using low beams: they must be turned on when driving in areas without streetlights at night, during dusk when it is relatively dark or at dawn when light is just appearing, and in weather conditions such as heavy fog, snow, or heavy rain when visibility is poor, even during the day.
Was this review help?
8
4
Share
More Forum Discussions

Which country produces Mitsuoka Motors?

Mitsuoka Motors is produced by Japan. Here is more information about Mitsuoka Motors: 1. The Mitsuoka Galue 4.5 resembles a classic car, with its thick and classical front end highlighting the noble temperament of a duke. However, when viewed from the side, its overall curves exhibit more of the smooth lines of a modern sedan. The rear design echoes the front, featuring narrow strip-shaped taillights and a massive chrome bumper. 2. The Mitsuoka Galue 4.5 is equipped with a 4.5L V8 engine, delivering a maximum power of 253Kw, ensuring the dynamic performance of this luxury sedan with a net weight of 1.8 tons. 3. It comes with modern configurations such as a five-speed manual/automatic transmission, tire pressure monitor, DSC traction control system, airbags + side curtains, and a BOSE 7-channel audio system.
2
5
Share

How many amps is a 12V battery?

12V cannot be directly converted to milliamperes (mA). Volt (V) is a unit of voltage, while milliampere (mA) or ampere (A) is a unit of current. These units are not interchangeable. A battery is typically described by two parameters: voltage and capacity. Precautions for battery usage: Wait 15 seconds before reignition: If the vehicle fails to start on the first attempt, wait at least 15 seconds before trying again to prevent excessive battery discharge, which could affect performance and lifespan. When the vehicle is unused for over half a month: Remove the negative terminal clamp of the battery to prevent the vehicle's electrical system from draining the battery with residual current, which may result in failure to start upon reuse. Regular maintenance: Batteries that remain unused for extended periods may self-discharge, leading to power depletion. Therefore, batteries not in use should be regularly maintained and recharged to avoid performance degradation and lifespan reduction due to excessive discharge.
2
2
Share

What causes a car to sway left and right?

Car swaying left and right may be caused by abnormal tire pressure. The tire pressure values of the four tires should not differ too much, generally within 0.1 bar is normal. If the tire pressure values differ significantly, the uneven pressure will cause inconsistent energy absorption and shock absorption capabilities of the tires, leading to body shaking at high speeds. Below are the functions of car tires: Supporting the entire weight of the vehicle: Car tires support the full weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. Improving vehicle performance: Car tires transmit traction and braking torque to ensure good adhesion between the wheels and the road surface, enhancing the car's power, braking, and off-road capabilities; together with the car's suspension, they mitigate impacts during driving and dampen resulting vibrations. Preventing early damage to car components: Car tires protect car components from severe vibrations and early damage, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and fuel efficiency.
10
4
Share

How to Transfer an Out-of-Town Driver's License to Local?

The procedure for transferring a driver's license back to your local area requires that the license must have been held for at least one year before it can be transferred, and you will need to retake the third subject test. After preparing the necessary materials: original and photocopy of ID card, original and photocopy of driver's license, recent one-inch bareheaded photo, motor vehicle driver's license application form, and physical examination form (to be filled out and tested at the vehicle management office), follow the steps below at the processing window of the vehicle management office to get a number and queue: 1. First, check if there are any traffic violations on the driver's license. 2. Go to the corresponding window to request the application form. 3. Submit the application form, physical examination report, and related materials to the staff. 4. After the staff verifies and reviews, go to the cashier to pay the fees.
11
3
Share

What is the suitable valve clearance for a scooter motorcycle?

Scooter motorcycle valve clearance is suitable at 0.05 to 0.06mm. A motorcycle is a nimble and fast means of transportation, driven by a gasoline engine, and is a two-wheeled or three-wheeled vehicle that steers the front wheel via handlebars. It is lightweight, flexible, and fast, widely used for patrolling, passenger and cargo transportation, and as sports equipment. The daily maintenance methods for motorcycles are: 1. During the break-in period, control the motorcycle's idle speed at 100 rpm; 2. Match the motorcycle's gear with the corresponding speed; 3. When braking is needed due to an obstacle ahead, release the throttle, step on the rear brake with the right foot, and lightly apply the front brake with the right hand; 4. Regularly check the spark plug; 5. When installing a new spark plug, hand-tighten it until it can't be turned anymore, then use a spark plug socket to tighten it an additional quarter to half turn; 6. Regularly lubricate the chain.
4
0
Share

Is an Appointment Required for the Changchun Subject 4 Exam?

An appointment is required for the Changchun Subject 4 exam. Below is an introduction to Subject 4: Exam content: Requirements for safe and civilized driving, safe driving skills under complex conditions, and emergency handling in critical situations. Exam format: Depending on the type of driver's license being tested, 50 questions are randomly selected from the corresponding Subject 4 question bank in proportion. For small vehicle licenses, questions are drawn from a pool of 1,240, while for large vehicle licenses, they are drawn from a pool of 1,235. Each question is worth 2 points. The exam duration is 45 minutes, and if 12 points (6 questions) are incorrect during the exam, the session is terminated. The question types include true/false questions (1-20), single-choice questions (20-40), and multiple-choice questions (41-50). Exam questions include image-based questions, scenario recognition questions, and text-based questions.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.