How to Operate the Toyota Prado 4WD?

1 Answers
MargaretRose
07/29/25 5:13pm
Toyota Prado 4WD operation methods: 1. For older models, high-speed 4WD and low-speed 4WD are controlled by the small lever on the right side, usually in the H (High) position. If driving on muddy roads or mountain paths, shift the transmission to neutral, then press the brake and move the small lever on the right side to the L (Low) position. 2. For newer models, when the gear is in neutral or P, press the brake and move the shift button from H4 to L4. The Prado is an imported ORV and a large off-road vehicle. In terms of body dimensions, its length, width, and height are 4760mm, 1885mm, and 1845mm respectively, with a wheelbase of 2790mm.
Was this review help?
2
0
Share
More Forum Discussions

What are the hatchback models of Changan Ford?

Focus, Focus Active, Fiesta. The following is detailed information about the relevant models: Functional information: The definition of a hatchback is that the vehicle's cabin and trunk are in one compartment. This layout can increase the interior space of the vehicle while reducing the trunk space. Most hatchbacks are small cars and compact cars. Additional information: Ford hatchbacks are divided into 1.6L, 1.8L, and 2.0L engine displacements. The corresponding models include the 2013 Hatchback 1.6L MT Comfort, Hatchback 1.6L AT Comfort, Hatchback 1.6L MT Trend, and Hatchback 1.6L AT Trend.
4
2
Share

Is the driver's license photo taken on the spot?

Due to differences in procedures among driving schools in various regions, the photos used for driver's licenses may also vary. In some places, the driver's license photo will use the 1-inch photo submitted during registration, while in others, applicants bring their own photos to make the driver's license after passing the subject four exam, or the photo is taken on the spot during production. Requirements for driver's license photos: must be a recent (within the last six months) color frontal photo with a white background, no hat, no white clothing or uniforms, sized one inch, those with corrected vision must wear glasses, the head portion should occupy about two-thirds of the photo length, and the photo must be clear and recognizable.
11
4
Share

What car is the rora in Volkswagen?

Volkswagen does not have a model named rora, only the Bora. Taking the 2021 Bora as an example, it belongs to the compact car category with the following dimensions: length 4663mm, width 1815mm, height 1462mm, wheelbase 2688mm, fuel tank capacity 50l, trunk capacity 506l, and curb weight 1320kg. The 2021 Bora is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.
8
3
Share

What are the differences between Audi A3 and A3L?

The differences between Audi A3 and A3L are: 1. Different dimensions: the A3 measures 4343mm in length, 1815mm in width, and 1458mm in height; the A3L measures 4540mm in length, 1460mm in width, and 1820mm in height. 2. Different wheelbase: the A3 has a wheelbase of 2630mm; the A3L has a wheelbase of 2680mm. Both the Audi A3 and A3L use MacPherson independent suspension for the front suspension and multi-link independent suspension for the rear suspension. Both models are equipped with a 1.4L turbocharged engine, paired with a 7-speed dual-clutch transmission.
4
1
Share

Where is the fuse box of the Audi Q5L?

Audi Q5L fuse boxes are located on the left front door side, right front door side, and the right rear side of the trunk. Introduction to the Audi Q5L: The new Audi Q5L is the world's first long-wheelbase premium midsize SUV, with a wheelbase extended by 101 millimeters compared to the previous generation Audi Q5 and 88 millimeters longer than the overseas standard-wheelbase version, resulting in a body length of 4,765 millimeters. Concept of the fuse box: A box used for installing automotive fuses. According to the size of the fuses installed, it can be divided into: small automotive fuse boxes; medium automotive fuse boxes; and large automotive fuse boxes.
7
1
Share

Is the low beam the default when the headlights are turned on?

When the headlights are turned on, the default setting is the low beam. The method to switch between low and high beams is as follows: 1. Rotate the light control lever located on the left side of the steering wheel all the way forward to turn on the low beam; 2. Push the lever upward to activate the high beam. The difference between low and high beams lies in their illumination distance: the low beam illuminates a distance of 33 to 40 meters, while the high beam covers 80 to 120 meters. Precautions for using car lights include: 1. Use low beams when driving at night; 2. Do not use high beams when driving closely behind another vehicle in the same direction; 3. When navigating sharp turns, slopes, arched bridges, crosswalks, or intersections without traffic lights at night, alternate between high and low beams to signal.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.