···
Log in / Register

How to operate the one-touch window lift for Haval H9?

3 Answers
McGianna
09/01/25 6:58am
Haval H9's one-touch window lift operation method is: Press the car window control button twice to activate the one-touch function, which will fully open or close the car window glass. The Haval H9 is a mid-to-large-sized 5-door, 5-seat SUV with body dimensions of: length 4856mm, width 1926mm, height 1900mm, and a wheelbase of 2800mm. The Haval H9 is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 165 kW and a maximum torque of 385 Nm. It features a front-engine, four-wheel-drive layout, with a double-wishbone independent front suspension and a multi-link non-independent rear suspension.
Was this review help?
18
4
Share
TravisLynn
09/14/25 2:46am
The one-touch window operation on the Haval H9 is actually super simple – just lightly press or pull the switch to get it done. Specifically, if you want to operate a particular window, such as the driver’s side, gently tap the switch button: a light press allows normal up/down movement, letting you stop at any position; but if you press or pull the switch all the way down or up, the window will automatically rise to the top or drop to the bottom without needing to hold the button. This feature is especially convenient, as it allows you to operate the windows without distraction while driving, making it both safe and hassle-free. Additionally, the Haval H9 comes with an anti-pinch function—if it detects resistance during window movement (like an obstacle), it will automatically stop to prevent injuries. I often drive in the city, and the one-touch feature is handy at red lights, helping maintain ventilation inside the cabin. However, if the one-touch function stops working, it might be due to a stuck button or the need for initialization—simply park the car and manually raise/lower the window a few times to reset it. Regularly checking and lubricating the window tracks is also important to reduce noise and wear.
Was this review help?
14
3
Share
Expand All
MacRonan
10/28/25 3:29am
After driving the Haval H9 for so long, one-touch window control is a basic skill. The key to operation lies in remembering the switch's tactile feedback: a light tap on the button makes the window slowly rise or fall to your desired height, while pressing or pulling it firmly to the limit position triggers an instant one-touch full up or down. The switch on the driver's door is the most frequently used—try gently pressing it with your left hand and releasing to stop midway; for one-touch operation, hold it a few seconds longer until it reaches the end. This design is exceptionally thoughtful for long highway drives, allowing quick window adjustment to minimize wind noise. The anti-pinch system also safeguards children and pets by stopping immediately upon detecting obstacles. My routine includes checking the one-touch function upon entering, especially during rain for faster water protection. If it malfunctions, don’t panic—it might just need cleaning from dust or a manual reset: manually raise to the top, then lower completely a few times to reboot. Keep windows clean, as dust buildup can interfere with sensors.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Why is the BMW Z4 center control screen not lighting up?

If it happens occasionally, it is normal because when starting the car, the electricity is momentarily used for ignition, resulting in lower voltage. If the screen fails to light up multiple times during startup, you should check whether the power supply to the display screen is normal. If the power supply is abnormal, replace the power supply module. Then, check whether the ribbon cable connection is good. If there is a problem, replace the ribbon cable. If everything is normal, it may be that the display screen is damaged. Here are the specific details: 1. Restart the ignition: If the center control screen goes black and does not light up, you can first restart the ignition to reboot the screen. If the problem persists, it is likely due to poor line contact. You need to promptly check whether the lines have loose connections. If so, it will naturally cause the center control screen not to light up. In this case, simply reconnect the loose parts properly. 2. Aging signal line: It could also be due to aging of the power signal line. You can try replacing it with a new one. If the black screen issue is resolved, it confirms that the power signal line was indeed the problem. If the center control screen remains black after checking the above two scenarios, it is likely due to prolonged use of the screen, causing the power supply module to malfunction, leading not only to lag but also severe black screen issues.
16
0
Share

Can You Still Drive with a Faulty Crankshaft Position Sensor?

Crankshaft position sensor damage means the car cannot be driven anymore. When the crankshaft sensor is damaged, the rotation angle of the crankshaft cannot be determined, and the vehicle's computer does not receive signals from the crankshaft position sensor. To protect the engine, it stops fuel injection and ignition. Principle of the Crankshaft Position Sensor: The crankshaft position sensor is usually installed at the front end of the crankshaft (near the pulley), the rear end near the flywheel, or the middle of the crankshaft. In early models, it was also installed inside the distributor. It is one of the most important sensors in the control system. Function of the Crankshaft Position Sensor: Its functions include detecting engine speed, hence it is also called a speed sensor; detecting the top dead center position of the piston, thus also known as a top dead center sensor, including detecting the top dead center signals of each cylinder for ignition control and the top dead center signal of the first cylinder for sequential fuel injection control.
1
1
Share

How to Take a Photo for Vehicle License?

When taking a photo for the motor vehicle license, it should be shot from a 45° angle on the left front side of the vehicle. The vehicle image should occupy two-thirds of the photo; the vehicle photo should clearly show the body color and exterior features.
15
5
Share

What grade of gasoline should the Lynk & Co 03 use?

The Lynk & Co 03 should use 95-octane gasoline, as recommended in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, you can also find it indicated on the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is higher, 98-octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade. High compression ratio engines can also be tuned to use lower-octane gasoline, as factors like ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, higher-octane gasoline has a higher octane rating and better anti-knock properties. For example, 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Lynk & Co 03 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the current tank is used up. However, prolonged use of the wrong gasoline grade can have the following effects: Using a higher-octane gasoline in a vehicle designed for lower-octane fuel won't cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. Using a lower-octane gasoline in a vehicle designed for higher-octane fuel can cause engine knocking. The significantly lower octane rating reduces the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, it creates resistance during the upward stroke, making the engine run very unstably. Mild knocking may only increase noise without significant engine damage, but severe knocking indicates serious engine issues, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring.
12
1
Share

What Type of Gasoline Should a Mustang Use?

Mustang should use 92-octane gasoline. This octane rating is recommended in the vehicle's official user manual. In addition to checking the user manual for the appropriate gasoline octane, you can also find this information on the fuel tank cap, which will indicate the recommended octane. Typically, the octane can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is higher, 98-octane gasoline is recommended. However, with the use of new technologies, the octane cannot be solely determined by the compression ratio. Engines with high compression ratios can also be tuned to use lower-octane gasoline because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the octane rating, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If a Mustang occasionally uses the wrong octane gasoline, simply switch back to the correct octane after the tank is empty. However, long-term use of the wrong octane can have the following effects: For vehicles designed for lower octane, using higher octane gasoline will not cause damage, but the increased octane can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher octane, using lower octane gasoline can cause engine knocking. Because the octane is significantly lower, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance occurs during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
10
5
Share

Can motorcycles go on highways in Lhasa?

Currently, there is no explicit legal prohibition against motorcycles driving on highways, but local authorities can decide whether to allow motorcycles on highways based on actual road conditions. The following points should be noted: Documents: The driver must have all necessary documents, including a motorcycle driver's license and license plate, and must also have compulsory insurance such as traffic liability insurance. Helmet: During the ride, the driver must wear a helmet and protective gear, and must not stop suddenly or carry passengers. Speed limit: The motorcycle must have an engine displacement of more than 125cc, and the speed must not exceed 80 km/h.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.