How to Operate the Electronic Gear Lever of Boyue?

1 Answers
LeJayla
07/24/25 9:39pm
Depress the brake pedal, press the one-button start to ignite the vehicle, then depress the brake pedal again, hold the button in front of the gear lever, push it forward to engage the N gear. Continue to depress the brake pedal, hold the button in front of the gear lever, push it forward to engage the R gear. Depress the brake pedal, hold the button in front of the gear lever, pull it backward to engage the D gear. In D gear, pull the gear lever to the left once to enter the manual mode M gear. In manual mode M gear, push forward once to upshift, and pull backward once to downshift.
Was this review help?
20
5
Share
More Forum Discussions

How to Check the Condition of a Car's Turbocharger?

Methods to determine if a car's turbocharger is faulty: The car feels less powerful when accelerating. The engine does not burn fuel completely, and the exhaust emits a strong odor. The water temperature might not be significantly affected. The engine revs up slower than before, and there are strange noises. (1) During rapid acceleration, a normal turbocharger will produce a whistling sound from the exhaust valve above 1750 RPM. (2) Check the car's odometer; if the turbo is damaged, there will be abnormal noises inside. (3) If the car's turbocharger is faulty, the engine warning light will illuminate. (4) Disconnect the exhaust pipe on the compressor side to check for oil presence; excessive blue smoke from the exhaust is a sign of trouble. (5) A faulty turbocharger can cause incomplete combustion in the engine, leading to strong exhaust odors. Additional methods to assess the turbocharger's condition include: Listen: Normal wear is usually silent unless foreign objects damage the impeller, affecting balance and causing vibration noises. Look: Disconnect the exhaust pipe on the compressor side to check for oil presence and excessive blue smoke. Use: The engine may feel relatively weak during acceleration (above approximately 1200 RPM). Measure: Use a pressure gauge to check the intake pressure; normal pressure ranges between 0.2-0.3 MPa. Symptoms of a faulty turbocharger include blue or white smoke from the exhaust, reduced power, increased fuel consumption, higher oil consumption, unstable turbo pressure, unusual noises, high water temperature, unstable engine RPM, and poor turbo performance. 1. Blue or white smoke from the exhaust. 2. Reduced power. 3. Increased fuel consumption. 4. Higher oil consumption. 5. Unstable turbo pressure. A. Poor sealing of the turbocharger impeller shaft: Symptoms include blue smoke at idle, varying in intensity, no blue smoke while driving, but noticeable oil consumption. B. Severe clogging of the exhaust gas recirculation pipe: Symptoms include blue smoke at idle and while driving, worsening with acceleration, and significant oil consumption. C. Worn or aged piston rings, cylinder walls, or valve seals: Symptoms include heavy blue smoke, unusual noises from the turbocharger's turbine side, and oil leakage from the turbine side. D. Cracked turbocharger air duct: Symptoms include a fluttering noise when accelerating or decelerating. Can you drive with a faulty turbocharger? Yes, a car with a faulty turbocharger can still operate. The turbocharger is installed on both the exhaust and intake manifolds, so it's certain that if a factory-equipped turbocharger fails, it will still function to some extent. The most common issues with turbochargers are delayed response and oil burning. If the turbocharger stops working completely, the car cannot expel exhaust gases—meaning if the exhaust is functioning, the turbocharger is working. However, acceleration and speed will be significantly affected, and oil burning can damage the catalytic converter. It's advisable to consult a professional if issues arise. If your engine isn't working properly, you might suspect turbocharger failure, but many cases are directly related to the engine. Before removing the turbocharger, refer to a fault diagnosis chart to identify potential causes.
2
4
Share

What are the body dimensions of the Volkswagen Touran?

Volkswagen Touran body dimensions: length 4527 (4537) mm, width 1829 (1834) mm, height 1659 (1682) mm, wheelbase 2791 mm. Vehicle introduction: 1. Equipped with active electronic power steering system that can adjust steering effort according to different driving conditions. The car-like chassis adopts MacPherson front suspension and four-link rear suspension. 2. Features a transverse-mounted 2.0L water-cooled inline four-cylinder four-stroke two-valve electronically controlled gasoline engine, matched with a 5-speed manual transmission and an electronically controlled 6-speed automatic manual transmission.
8
1
Share

How Wide is a Sedan Generally?

A sedan is generally about 1.8 meters wide and approximately 4.8 meters long. Precautions to take during the break-in period of a new car include: 1. Warm up before starting: Turn the key to the second position and wait for 5 to 10 seconds before starting to protect the new car's engine; 2. Avoid emergency braking: Emergency braking can impact the braking system during the break-in period, increasing the load on the chassis and engine; 3. Avoid overloading: Running a new car at full capacity during the break-in period can damage the components; 4. Avoid long-distance trips: Taking long trips during the break-in period increases the engine's continuous working time, which can lead to component wear.
6
1
Share

Is it necessary to choose optional configurations when buying a Porsche?

It is not mandatory to choose optional configurations when buying a Porsche. Porsche, originating from Germany, takes the 2020 Porsche 911 as an example, with body dimensions of: length 4519mm, width 1852mm, height 1298mm, wheelbase 2450mm, and a fuel tank capacity of 64 liters. The 2020 Porsche 911 is equipped with a 3.0T twin-turbocharged engine, delivering a maximum power of 283kW and a maximum torque of 450Nm, paired with an 8-speed dual-clutch transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
8
3
Share

What are the symptoms of cylinder scuffing?

Cylinder scuffing may exhibit the following symptoms: 1. The vehicle experiences difficulty while driving; 2. The engine's water temperature rises; 3. Unstable engine RPM or engine stalling. The causes of cylinder scuffing include: 1. Insufficient lubrication between the piston and cylinder or incorrect oil selection; 2. Abnormal operation of piston rings; 3. Improper repair and assembly; 4. Excessive clearance between the piston and cylinder; 5. Malfunction in the engine cooling system. Preventive measures for cylinder scuffing are: 1. Regularly replace the air filter; 2. Monitor the engine water temperature while driving; 3. Operate the engine appropriately.
6
4
Share

What does the battery start-stop function mean?

The automatic start-stop function of the battery means that the car will automatically shut down when temporarily parked, and will automatically restart the engine when the car moves forward. Here are some introductions about automatic start-stop: 1. The core of automatic start-stop lies in the automatic control of shutdown and startup, reducing unnecessary fuel consumption, lowering emissions, and improving fuel economy. 2. This function is mainly suitable for urban traffic, when waiting for traffic lights or in traffic jams, it can minimize the idle time of the engine, and after the engine is shut down, its power supply can replace the pulley to provide operating power for the engine cooling fan and the car air conditioner.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.