How to operate the defogging function on Changan CS75?

What Do the Gears 1-6 in a Manual Transmission Mean?

12345 gears are used for upshifting and downshifting. Here is an introduction on how to upshift and downshift: 1. Upshifting: Neutral → 1st gear, push the gear lever inward with your right hand and then push it up into 1st gear; 1st → 2nd gear, hold the gear lever and pull it down into 2nd gear; 2nd → 3rd gear, push the gear lever up into 3rd gear with your hand; 3rd → 4th gear, lightly hold the gear lever with your palm, fingers apart, and pull it down into 4th gear while keeping your palm wrapped around the lever; 4th → 5th gear, push the gear lever outward with the back of your hand and then push it up into 5th gear. 2. Downshifting: 5th → 4th gear, pull the gear lever down from 5th gear into 4th gear; 4th → 3rd gear, hold the gear lever and push it up into 3rd gear; 3rd → 2nd gear, push it down into 2nd gear; 2nd → 1st gear, push it up into 1st gear.

20

5

Share

Do You Need Wheel Balancing and Four-Wheel Alignment When Changing Car Tires?

After changing car tires, you do not need to perform a four-wheel alignment; only wheel balancing is necessary. Four-wheel alignment is based on the four-wheel parameters of the vehicle, adjusted to ensure good driving performance and a certain level of reliability. Four-wheel alignment is required in the following situations: when the car normally drives straight, but after straightening the steering wheel, the car does not continue in a straight line, the four-wheel alignment may be problematic, especially if the driver constantly needs to adjust to keep the vehicle moving straight. If not addressed promptly, it can be dangerous. During routine tire inspections, if excessive tire wear is observed, particularly uneven wear ("tire cupping"), it is necessary to check if the four-wheel alignment is the issue. Severe wear can lead to tire blowouts. After replacing tires, wheel balancing is mandatory and is unrelated to four-wheel alignment. If the vehicle does not pull to one side while driving and the steering wheel remains straight, alignment is not necessary. However, wheel balancing must be performed; otherwise, vibrations may occur during driving.

2

5

Share

Does Using Auto Hold Increase Fuel Consumption?

Using the auto hold function will result in slightly higher fuel consumption compared to normal driving. Auto hold refers to an automatic braking feature. After activating this function, you don't need to engage the handbrake when waiting at traffic lights, which simplifies vehicle operation and makes driving more convenient. For automatic transmission vehicles, using auto hold eliminates the need for frequent gear shifting. Here is some relevant information about the auto hold function: 1. Auto hold is a relatively advanced configuration. The button for this function in vehicles is labeled as AUTO-HOLD. When enabled, it automatically activates four-wheel braking at traffic lights. Whether in D (Drive) or N (Neutral) gear, there's no need to keep your foot on the brake pedal or use the handbrake - the vehicle remains stationary. Simply pressing the brake pedal once is sufficient, and the car won't move forward even when you release your feet. 2. It's worth noting that the auto hold function can only be used in conjunction with an electronic parking brake. Vehicles equipped with mechanical handbrakes typically don't have this feature. Overall, auto hold is very practical as it not only relieves the driver's feet but also eliminates unnecessary operations.

20

1

Share

What are the reasons for the car not heating up?

There are several reasons why a car's air conditioning does not produce heat: 1. The vehicle has just started: The engine temperature has not yet risen, and it will work after the car warms up. 2. Insufficient coolant: A lack of coolant can also cause the car's air conditioning not to produce heat, and adding coolant will solve the issue. 3. Water pump damage: This can lead to a failure in the coolant circulation system, also causing the car's air conditioning not to produce heat, and replacing the water pump will fix it. 4. Clogged heater core: A clogged heater core prevents the hot water inside the engine from circulating to the core, resulting in the air conditioning not producing heat, and cleaning the heater core will resolve the issue. 5. Radiator fan malfunction: If the radiator fan runs continuously, it will dissipate heat constantly, making it difficult for the coolant inside the radiator to warm up, which can cause the air conditioning not to produce heat, and inspecting and repairing the radiator fan will fix the problem.

17

1

Share

What is the difference before and after the first maintenance?

Generally, after the first maintenance, the fuel consumption of the vehicle may change, and the acceleration during driving may become more responsive. During the first maintenance, the car will be inspected, ensuring better driving safety. When scheduling the first maintenance, owners need to make an appointment in advance to save time and avoid waiting in line. Below is more information about the first maintenance: 1. When changing the engine oil during the first maintenance, the old oil containing debris must be drained from the engine. The first maintenance is usually free. During daily driving, it's important to keep track of the car's performance and provide feedback to the technician during the first maintenance to avoid potential issues. 2. After the first maintenance, regular maintenance is typically required every 5,000 kilometers. Even if the car is not used frequently, timely maintenance is necessary to prevent component failures that could affect driving safety. 3. During the first oil change, many 4S shops drain the old oil from the engine using the oil pan drain bolt. However, this method may not completely remove all the old oil. A specialized oil extractor can be used to suction out the remaining oil. 4. During the first maintenance, various components of the car should be inspected, including fluid levels and tire pressure. The car's lighting system should also be checked to ensure proper functionality.

12

2

Share

How to adjust the rear seats of the Buick GL8?

The side of the rear seats of the Buick GL8 has buttons for adjustment. Press the buttons to adjust the front and rear positions—pressing the front part moves the seat forward, while pressing the rear part moves it backward. The armrests of the rear seats can be adjusted by pulling them manually. Here is more information about the Buick GL8: 1. The new Buick GL8 features a dual-armrest design, offering an aviation-like seating experience. The third row of the Buick GL8 consists of fully fixed seats, which can only be folded in the more common 4/6 split configuration. The folding method involves pulling the rings located at the bottom left and right of the rear seats to fold them separately, thereby increasing trunk space. Proportional folding allows the rear seat backrests to be divided proportionally, enabling any side to be folded down as needed to meet the requirements for increased trunk storage space and rear passenger capacity. 2. The driver's seat of the Buick GL8 is an electric seat. The electric seat control system not only allows for adjustments in seat sliding and tilting but also enables adjustments in front vertical, rear vertical, headrest, and lumbar cushion positions. Simply pulling or pressing the buttons can achieve electric-driven seat movement forward and backward, as well as backrest adjustments.

9

1

Share

How to operate the defogging function on Changan CS75?

What Do the Gears 1-6 in a Manual Transmission Mean?

Do You Need Wheel Balancing and Four-Wheel Alignment When Changing Car Tires?

Does Using Auto Hold Increase Fuel Consumption?

What are the reasons for the car not heating up?

What is the difference before and after the first maintenance?

How to adjust the rear seats of the Buick GL8?

Where is the engine number located on an older Volkswagen Polo?

How much fuel does a car consume when idling for one hour?

How to Properly Adjust a Motorcycle Clutch?

What causes unstable throttle with jerking movements in a car?