How to operate the Citroen Subject 3 lighting simulation?

1 Answers
DelFrank
07/30/25 3:45am
First, turn on the lights. Start with the high beam. Then switch to the low beam. After that, alternate between high and low beams twice. Next, turn on the hazard lights and fog lights. Finally, turn off all the lights.
Was this review help?
7
2
Share
More Forum Discussions

What do Land Cruiser and Prado mean?

Land Cruiser is an ORV off-road vehicle produced by Toyota, while Prado is a global strategic model of Toyota Motor Corporation. Taking the Prado 2019 3.5L Automatic TX-L Premium Edition as an example: it is a mid-to-large-sized 5-door 7-seat SUV under FAW Toyota, with a length, width, and height of 4840mm, 1885mm, and 1890mm respectively, a wheelbase of 2790mm, and equipped with a 6-speed automatic transmission. The Prado 2019 3.5L Automatic TX-L Premium Edition uses a 3.5L twin-turbocharged engine, with a maximum torque of 365 Nm and a maximum power of 206 kW. It features front-engine four-wheel drive and uses tires with a specification of 265/60R18.
17
5
Share

What does ECO mean?

ECO refers to the economic driving mode of a car. It is an English abbreviation derived from the words Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it means the vehicle's economy mode has been activated. Eco mode can be either active or non-active. The difference lies in the fact that the active mode has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active Eco mode does not have a dedicated button. When the Eco indicator light on the dashboard illuminates, it serves only as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most cars use the active Eco driving mode, meaning they have a dedicated switch button. Therefore, during daily driving, we can activate the Eco mode. However, it is unnecessary to activate Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so may not only fail to demonstrate the fuel-saving characteristics of Eco mode but also affect the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 km/h, the car prioritizes speed, and the Eco mode automatically deactivates. During idle parking, in N/P gear, or in manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function.
4
5
Share

What is the tutorial for replacing the wiper blades on the Honda XR-V?

Honda XR-V wiper blade replacement tutorial is: 1. First lift the driver's side wiper arm, then lift the passenger side wiper arm; 2. Press the locking tab, then slide the blade out of the wiper arm; 3. Pull out the tab end and slide the blade out of the bracket; 4. Slide the new blade into the bracket from the bottom end, the tab on the bracket should snap into the notch at the top of the blade; 5. Slide the blade onto the wiper arm; 6. First lower the passenger side wiper arm, then lower the driver's side wiper arm. Taking the Honda XR-V 2021 1.5L Manual Classic Edition as an example, its body dimensions are 4328mm in length, 1772mm in width, and 1610mm in height, with a wheelbase of 2610mm, and the body structure is a 5-door, 5-seat SUV.
3
1
Share

Where is the rearview mirror heating switch for the Mercedes-Benz E300L?

The rearview mirror heating switch for the Mercedes-Benz E300L is located in the central control button area, combined with the rear windshield defogging function at the same switch. Pressing the corresponding switch will simultaneously heat both the rear windshield and the rearview mirrors. The rearview mirror heating function can evaporate water, snow, and frost from the mirror surface during rainy, snowy, or foggy weather, ensuring a clean and clear view. Taking the Mercedes-Benz E-Class 2021 E300L Fashion model as an example, its body dimensions are 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. It is equipped with a 2.0T turbocharged engine and a 9-speed automatic transmission.
3
0
Share

How to Solve the Issue of the Central Control Not Powering Off When Locking the Car?

The solution to the central control not powering off when locking the car is: 1. Use the method of disconnecting the entire vehicle's power. Open the trunk and locate the grounding wire under the right side of the trunk carpet; 2. Disconnect the grounding wire to cut off the battery power; 3. Wait for a few minutes before reconnecting it to restore power, and the central control screen will return to normal. The display on the central control panel mainly shows car audio, navigation, vehicle information, reverse camera feed, etc., and includes both single-touch and multi-touch LCD screens. In most car models, the central control color screen is located near the central control panel. During use or storage of the car, care should be taken with the surface polarizer of the LCD screen to avoid scratches from hard objects, and placing hard items on the LCD screen is strictly prohibited.
14
3
Share

How to reset the maintenance light on the 2019 Levin?

The steps to reset the maintenance light on the 2019 Levin are: 1. Press button A and hold down the brake pedal, neither should be released midway; 2. Do not start the engine, but the vehicle's power must be turned on; 3. At this point, the dashboard or characters will start flashing; 4. Continue holding down the reset button A until an ellipsis appears on the display screen; 5. Release the brake pedal and simultaneously let go of button A; 6. The maintenance light reset operation is complete, turn off the vehicle's power. Taking the Levin 2019 Hybrid 1.8HE-CVT Advanced Edition National VI as an example, its body dimensions are 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm, and the body structure is a 4-door, 5-seater sedan.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.