How to operate the air conditioning in Hongqi H5?

How to adjust the steering when the right side is wide and the left side is narrow while reversing into the garage?

When the rearview mirror shows a "left wide, right narrow" positional relationship, turn the steering wheel 1/4 turn to the left, and straighten the wheel when the car body is aligned. Reversing into the garage is an assessment point in the driver's test. It involves correctly maneuvering the vehicle into the garage from both sides while moving. There is a time limit for reversing into the garage during the test. Below are the evaluation criteria for reversing into the garage: 1. Failure to follow the prescribed route and sequence results in disqualification. 2. If the car body touches the line or fails to enter the garage while reversing, it results in disqualification. 3. Exceeding 210 seconds without completing the reversing into the garage results in disqualification. 4. Stopping midway deducts 5 points each time.

20

1

Share

Why Does Oil Leak After an Oil Change?

Because the oil pan bolt is not tightened properly or the drain plug gasket needs replacement (poor sealing). As the engine operates, engine oil has strong permeability and typically seeps slightly from the oil seal, which is a common occurrence and not a malfunction. Below are explanations of two scenarios: Minor Oil Seepage: It does not significantly affect the engine. It is advisable to continue using the vehicle while monitoring the situation. For oil seepage or slow leaks, identify the location, usually most common at joints. Sometimes, simply tightening the relevant screws yourself can resolve the issue. Long-term Oil Seepage: It is recommended to have it inspected at a professional repair shop. Although this seepage does not affect the engine's overall operation, it depletes the lubrication system's oil over time, reducing the oil level. Prolonged seepage can degrade the lubrication system's effectiveness and ultimately shorten the engine's lifespan.

17

2

Share

What engine does Changan Oushang have?

Changan Oushang is equipped with a 1.5L DAM engine, with a maximum torque of 148, a maximum power of 84, and a maximum horsepower of 114. The following is extended information about Changan Oushang: 1. Exterior: The vehicle's length/width/height are 4490/1860/1580mm respectively, with a wheelbase of 2710mm. 2. Interior: It features a 10-inch full LCD dashboard with clear and easy-to-read content, displaying information such as fuel consumption, tire pressure, and navigation in the central area. 3. System: It comes with the new Onstyle 3.0 intelligent ecosystem, built-in Qualcomm Snapdragon 8-core car chip, and includes functions such as artificial intelligence voice, navigation, music, radio, facial recognition, gesture recognition, remote vehicle control, track mode, and wireless car KTV.

7

2

Share

Will There Be Color Difference When Replacing a Bumper?

There might be slight color difference when replacing a bumper. Automobile Safety Device: The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear parts of the vehicle body. Many years ago, the front and rear bumpers of cars were made of steel plates pressed into channel steel, riveted or welded to the frame longitudinal beams, with a relatively large gap from the vehicle body, which looked quite unattractive. Bumper Material: With the development of the automotive industry and the extensive application of engineering plastics in the automotive sector, car bumpers, as an important safety device, have also embarked on a path of innovation. Today, the front and rear bumpers of cars not only maintain their original protective functions but also strive for harmony and unity with the vehicle body styling, as well as the pursuit of lightweight design. Both the front and rear bumpers of cars are made of plastic, hence they are commonly referred to as plastic bumpers.

14

3

Share

What does a continuously flashing traffic signal indicate ahead?

Yellow light flashing indicates that you need to slow down and observe the road conditions ahead at the intersection, as it is a hazardous section. When the traffic signal at the intersection is a single yellow light flashing continuously, it serves as a warning light. This type of signal alerts drivers to reduce speed, observe the movements of other vehicles and pedestrians on the road, and proceed forward safely without being penalized for running a yellow light or facing fines and demerit points. Below is an introduction to traffic signals: 1. Types: Include motor vehicle signals, non-motor vehicle signals, pedestrian crossing signals, lane signals, directional indicator signals, flashing warning signals, and signals at railway crossings. They can generally be categorized into two types: vehicle traffic control lights and pedestrian crossing lights. 2. Meanings of red, yellow, and green lights: When the red light is on, vehicles and pedestrians are not allowed to proceed, and vehicles should wait behind the stop line. When the yellow light is on, vehicles and pedestrians are not allowed to proceed, but those that have already crossed the stop line may continue. When the green light is on, vehicles and pedestrians are permitted to proceed.

17

2

Share

Differences Between Aluminum Alloy Wheels and Steel Wheels

Steel wheels and aluminum alloy wheels differ mainly in appearance and weight. Aluminum alloy wheels are more aesthetically pleasing and lighter in weight. However, aluminum alloy wheels are more expensive, while steel wheels are cheaper. Almost no cars use steel wheels anymore, with most vehicles now equipped with aluminum alloy wheels. The specific differences are as follows: 1. Practicality: Using aluminum alloy wheels can improve handling. Aluminum alloy wheels are lighter, which reduces unsprung mass. Lower unsprung mass enhances the responsiveness of the car's shock absorbers, improving wheel contact with the road. Better wheel contact increases grip, thereby enhancing handling. 2. Heat Dissipation: Aluminum alloy wheels also offer superior heat dissipation, helping to cool tires and brakes. The designs of aluminum alloy wheels are more varied, with some manufacturers even offering custom styles. Therefore, most high-end luxury cars use aluminum alloy wheels. However, aluminum alloy wheels are more prone to damage. If scratched while parking, noticeable marks can form on the surface, which significantly affects appearance. Thus, owners of cars with aluminum alloy wheels are advised to pay close attention to the distance between the tire and the curb when parking.

5

Share

How to operate the air conditioning in Hongqi H5?

How to adjust the steering when the right side is wide and the left side is narrow while reversing into the garage?

Why Does Oil Leak After an Oil Change?

What engine does Changan Oushang have?

Will There Be Color Difference When Replacing a Bumper?

What does a continuously flashing traffic signal indicate ahead?

Differences Between Aluminum Alloy Wheels and Steel Wheels

What lights to use when facing oncoming traffic at night?

What Causes the Slow Response of Sensor Lights?

How many cubic meters of soil can an 8-wheel rear truck carry?

What does it mean when the airbag detonation device exceeds the upper limit?