How to Operate Lights at Night?

[HadleyDella]

Methods for operating lights at night are as follows: 1. Use low beams when following a vehicle closely in the same direction; 2. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signals, alternately switch between high and low beams as a signal; 3. When meeting an oncoming vehicle, switch between high and low beams when the distance is more than 150 meters away; 4. Use turn signals and low beams when turning at intersections; 5. Alternate between high and low beams to alert the vehicle being overtaken when passing; 6. Use low beams when driving on well-lit roads with streetlights; 7. Use high beams when driving on unlit roads at speeds exceeding 30 kilometers per hour.

[TylerMarie]

Proper light operation is crucial when driving at night. After starting the car, immediately turn on the headlights. Generally, use low beams for illumination in urban areas or on roads with streetlights, ensuring sufficient visibility without dazzling others. On dark highways or rural roads, you can switch to high beams to see farther ahead, but must quickly switch back to low beams when there are oncoming vehicles or cars ahead, complying with traffic rules to prevent accidents. In foggy conditions, turn on both front and rear fog lights to enhance penetration and improve safety. Make it a habit to regularly check if all lights are functioning properly—don't wait until there's a problem to address it. Based on years of driving experience, I've learned that using lights correctly ensures stable night driving, and timely use of turn signals allows other drivers to anticipate your moves.

[DiJackson]

New drivers, don't be nervous about turning on lights at night—it's quite simple step by step. After starting the car, rotate the light lever to the ON position, and indicator lights on the dashboard will illuminate, indicating the headlights are on. Always keep the low beam mode while driving, and only use the high beams briefly in completely dark areas. Switch back to low beams promptly when encountering oncoming or preceding vehicles to avoid glare. Additionally, the fog light switch is usually a button near the steering wheel—turn it on in heavy fog to improve visibility. Practice more in the beginning to build muscle memory, and always prioritize safety—don’t cut corners.

[LaDawson]

Many modern cars come with automatic lighting systems for convenience and peace of mind. Upon starting, the system automatically detects light levels and adjusts brightness, typically maintaining low beam status. If brighter visibility is needed on highways, manually switch to high beams but avoid prolonged use to prevent dazzling others. Fog lights can also be independently activated to enhance safety during rainy or foggy conditions. The automatic mode simplifies operation; daily use only requires ensuring the function works properly with occasional checks.

[VonAva]

Proper use of vehicle lights at night is crucial for safety compliance. Regulations require low beam usage in urban areas to avoid dazzling other drivers, while high beams are permitted on highways but must be switched back during oncoming traffic. Activating fog lights during poor visibility follows standard practice to enhance vehicle conspicuity. Violations such as persistent high beam use may result in fines or accidents, necessitating constant attention to switching protocols to mitigate risks.

[McJanelle]

Safe driving primarily focuses on proper light operation. Turn on the headlights with low beams immediately after starting the vehicle at night. Briefly switch to high beams in dark sections to assess road conditions before reverting, especially using front and rear fog lights in rainy or foggy weather to enhance vehicle visibility. In hazardous situations like temporary stops, activate the hazard warning lights to alert vehicles behind. Develop the habit of checking light conditions to ensure functionality, effectively preventing nighttime accidents and improving overall road safety.