How to Operate an Automatic Transmission?

1 Answers
DeJack
07/25/25 3:01am
When starting an automatic transmission vehicle, it is important to ensure that the gear lever is in the P (Park) or N (Neutral) position before starting the engine. During startup, pay attention to coordinating the brake, handbrake, and accelerator properly after shifting to D (Drive) gear. While releasing the handbrake, slowly lift the brake pedal and then gently press the accelerator to allow the vehicle to start moving gradually. Avoid stomping on the accelerator abruptly, as it not only wastes fuel but also damages the vehicle. Also, make sure not to release the brake pedal when shifting gears.
Was this review help?
16
3
Share
More Forum Discussions

What are the reasons for the lack of acceleration in Jinbei Haise?

Jinbei Haise engine acceleration weakness reasons are as follows: 1. Carbon deposits: Carbon deposits include cylinder carbon deposits, throttle carbon deposits, spark plug carbon deposits, intake carbon deposits, etc. These locations are closely related to the engine's power output. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power, resulting in sluggish acceleration and muffled sounds. 2. Fuel system: Adding incompatible fuel grades can cause a decrease in the vehicle's output power and reduced performance. Or, due to a blocked fuel tank vent, clogged fuel tank switch, fuel filter, or fuel line between the tank and carburetor, the required fuel supply cannot be met, leading to an overly lean air-fuel mixture and weak engine acceleration. 3. Intake: If the air filter is not cleaned in time after long-term use and becomes clogged, insufficient air volume will result in an overly rich combustible mixture, causing a drop in engine power. For vehicles equipped with turbochargers, if the turbocharging device malfunctions, even when the throttle is applied, the engine will remain sluggish and fail to deliver power. 4. Engine overheating: Engine overheating can lead to poor lubrication, increased mechanical wear, reduced engine power, and weak acceleration.
3
5
Share

What is the oil model for BMW?

For BMW 1 Series, 2 Series, 3 Series, X1 and other models, the official recommendation is SAE5W-30 and higher-grade SAE0W-40. The BMW 5 Series generally uses the oil model specification of 5W30. Oil SAE5W-30: SAE-5W-30 is a grade of all-season oil. 5W can withstand external low temperatures of -30°C, and the following 30 means it can withstand a maximum temperature of +30°C (summer temperature). Oil SAE0W-40: SAE5W-40 refers to the original oil, where 5W represents winter oil. Oil 5W30: Suitable for Japanese and Korean cars, as the engines of these two series are more precise with smaller gaps. If only considering the viscosity grade, 5W30 is suitable for colder regions and winter. Methods for selecting oil: If you value the longevity of the oil, you can use Mobil lubricants; if you care about the cleaning ability of the oil for the engine, it is recommended to choose Shell oil; if you need oil with strong oil film elasticity, you can choose Castrol. Precautions for selecting oil: Choose oil with the appropriate viscosity, and pay attention to the amount of oil added, which should not be too much or too little. Too much oil can easily increase the engine load and affect power; driving for too long can damage the engine exhaust system, increase carbon deposits, and too much oil can also create the illusion of burning oil. Too little oil will affect the overall lubrication effect of the engine, causing many components that rely on crankshaft splash lubrication to wear out more severely or even be damaged.
2
3
Share

Is it necessary to purchase auto theft insurance?

Auto theft insurance is necessary. However, it is essential to consider various factors comprehensively, such as financial capability, the security situation of the surrounding environment, the age of the car, and its value. When the insured vehicle is entirely stolen, robbed, or snatched, the insurer will not be liable for compensation under the following circumstances, unless otherwise agreed. The absence of a legally valid driving license or license plate issued by the traffic management department of the public security authority at the time of the insured incident; the insured fails to provide the vehicle suspension procedures or a theft case certificate issued by the criminal investigation department of the public security authority at or above the county level where the incident occurred when claiming compensation; the insured vehicle is in a competition, inspection, repair, maintenance, or during the period of being detained, requisitioned, or confiscated; the insured vehicle is transferred to others, and the insured or the transferee fails to fulfill the notification obligation stipulated in Article 15 of Part II "General Terms" of this insurance contract, resulting in a significant increase in the risk level of the insured vehicle and the occurrence of an insured incident. Principle of insurance liability: The theft of parts or accessories of the insured vehicle, which does not constitute the entire vehicle being stolen, is not covered by the insurance liability. If the entire insured vehicle is stolen and a case is filed by the public security department, but the vehicle is not found after more than three months, it falls under the insurance liability; if the vehicle is recovered within three months but is found to be damaged or with missing parts or accessories, such losses caused by the entire vehicle being stolen or robbed are also covered by the insurance liability. If the entire insured vehicle is stolen or robbed for more than three months, the insurance company may compensate according to the regulations after obtaining the vehicle equity transfer document from the insured. When the insured amount is higher than or equal to the actual value of the vehicle, compensation is given based on the actual value; when the insured amount is lower than the actual value of the vehicle, compensation is given based on the insured amount.
18
5
Share

How is the early vehicle inspection date calculated?

Early vehicle inspection dates are calculated based on the annual inspection expiration month and year printed on the supplementary page of the vehicle's registration certificate. Below are the specific regulations for vehicle inspections: 1. Commercial passenger vehicles: Inspected once a year within the first 5 years; inspected once every 6 months after exceeding 5 years. 2. Trucks and large/medium-sized non-commercial passenger vehicles: Inspected once a year within the first 10 years; inspected once every 6 months after exceeding 10 years. 3. Small and mini non-commercial passenger vehicles: Inspected once every 2 years within the first 6 years; inspected once a year after exceeding 6 years; inspected once every 6 months after exceeding 15 years.
2
1
Share

What causes noise from the front wheels of a car?

If there is noise coming from the front wheels of your car, you should check the following aspects: 1. Noise from the car door. The structure of the car door is relatively simple, so first check if the screws are not tightened properly. 2. Noise from the sunroof is quite common. Small stones or dust can accumulate in the sunroof's guide rails, and over time, poor sealing can cause noise. 3. Noise from the dashboard. Generally, noise from the dashboard is related to the overall workmanship and materials of the car. Consider whether the dashboard panel has been removed before or if navigation wiring has been installed. 4. Noise originating from the chassis or outside the car. In this case, it is recommended to visit a 4S shop for inspection.
11
3
Share

What does Xiaopeng P7 NGP mean?

Xiaopeng NGP (Navigation-Guided-Pilot), also known as "Automatic Navigation Assisted Driving", is an assisted driving function achieved by Xiaopeng's XPILOT 3.0 system in combination with navigation routes. It can be understood as a high-level assisted driving system based on high-precision maps. Below is additional information: NGP functions: After activation, NGP not only retains the original ACC adaptive cruise, LCC lane centering assistance, ALC automatic lane changing assistance, but also adds functions such as automatic selection of optimal lanes, automatic overtaking of slow vehicles, automatic speed limit adjustment, automatic highway on/off-ramp switching, avoidance of traffic cones and broken-down vehicles, and night overtaking reminders.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.