How to Operate a Manual Transmission When Turning?

Why can't the tailgate button of the Baojun 730 open?

If the tailgate button of the Baojun 730 cannot be opened, it may be because the central control is locked. If the central control is not locked, you can press the opening button on the right side of the license plate light on the tailgate, and it will open with a single press. If the central control is locked, press and hold the middle button on the remote control for 2 seconds until you hear a beep, and the tailgate will open. The Baojun 730 is a model under SAIC-GM-Wuling Automobile, with body dimensions of 4780mm in length, 1820mm in width, and 1755mm in height, and a wheelbase of 2750mm. The rear design of the Baojun 730 has been significantly adjusted, with reduced chrome strips and an increased tailgate size that spans the entire width of the rear. The tail lights have been changed from the original split design to an integrated design, featuring a horizontal LED light strip that is stylish, eye-catching, and gives a sense of technology.

2

Share

What is the 0-100km/h acceleration time of the VOGE 300RR?

The VOGE 300RR achieves a 0-100km/h acceleration time of 7.6 seconds, reaching the century mark in fourth gear. Below are the relevant details: Exterior: The design of the VOGE 300RR is highly successful, with its overall layout, smooth lines, and engine casing all perfectly balanced, creating a very comfortable appearance without any sense of oppression. Engine: The 300RR is equipped with a single-cylinder, liquid-cooled, fuel-injected engine that delivers solid performance, with a top speed of 155km/h. Handling: While not outstanding among its peers—given that it is a sports bike geared more toward civilian use—it doesn't offer the agility and freedom of, say, an Aprilia 150. However, it still performs significantly better than conventional motorcycles, allowing for easy execution of cornering maneuvers, though driving technique also plays a role here. Features: This is undoubtedly a strong point for domestic brands, with desirable features like ABS available on this model. Additionally, the front brake utilizes a dual-disc setup, providing robust braking performance.

8

4

Share

Why is the system too lean at idle in the Tiguan?

For the Volkswagen Tiguan, the possible causes of a lean air-fuel mixture at idle include an intake system air leak or incorrect air-fuel ratio. Both of these issues can lead to the P2178 code (System Too Lean at Idle) in the Tiguan. Below are detailed explanations of the potential causes: Intake System Air Leak: An air leak in the intake system can result in a lean air-fuel mixture. It is recommended to check whether the oil dipstick is properly inserted, inspect the oil cap seal for aging, and examine if the PCV valve is damaged. Incorrect Air-Fuel Ratio: An incorrect air-fuel ratio can also cause a lean air-fuel mixture. It is advisable to check if the throttle body is dirty or clogged, as dirt can lead to a lean mixture. Additionally, inspect whether the fuel injectors are atomizing properly. For models equipped with the EA888 engine, cleaning the fuel injectors is recommended since direct injection engine injectors are difficult to remove and inspect. If no issues are found, check the engine control unit for any fault codes related to the oxygen sensor. If none are present, it is suggested to read the data stream again to confirm and rule out oxygen sensor faults.

1

2

Share

Can I Renew My Motorcycle License Online?

Motorcycle license renewal can be processed online. The motor vehicle driver should apply for license renewal at the vehicle management office of the original license issuing authority within 90 days before the expiration of the current motor vehicle driving license. In addition to applying for renewal at the vehicle management office, you can also apply through the following methods: Renewal via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- Fill in the information. The new license is generally delivered by mail. Visit the "Police-Medical-Post" service point at a postal business hall to process the renewal. The entire process from registration acceptance, medical examination to new license production takes only half an hour. Currently, only a few cities have opened this service, such as Hangzhou. Documents required for renewal: Bring two copies of ID card, two 1-inch recent color photos without hats, original ID card, original driving license, and a medical examination certificate from a county-level or above hospital (free medical examination is also available at the vehicle management office).

13

4

Share

Can a Flooded New Car Be Fully Restored?

A flooded new car cannot be completely restored. Here is relevant information about water-damaged vehicles: Safety Hazards of Flooded Vehicles: Even after repairs, flood-damaged cars pose serious risks. Typical repair methods for flooded vehicles include disassembling and cleaning electrical components, drying them, and reinstalling them, while airbags are often removed entirely and not replaced. Restored flooded cars commonly exhibit issues such as non-functional air conditioning and inoperative audio systems. When purchasing or using a vehicle, always avoid flood-damaged cars—prioritize safety over cost savings. If a vehicle is submerged in water, it can lead to rapid rusting of body components, shortened lifespan, and compromised safety performance. For instance, water damage causes corrosion and rusting of wiring, potentially resulting in sudden engine shutdowns or even fires due to electrical shorts while driving—consequences that could be catastrophic. How to Handle a Flooded Vehicle: If your car is flooded, the immediate priority is drainage. Remove the vehicle from the water as quickly as possible, taking care not to start or crank the engine. Tow it to a repair shop promptly for disassembly and thorough cleaning.

12

4

Share

What Causes a Hissing Sound When Braking?

This situation may be caused by damage to the vacuum booster pump in the braking system. If this occurs, it is recommended to replace the vacuum booster pump with a new one. Here are some related details: 1. The braking system is extremely important for a vehicle, as it affects both driving stability and safety. 2. The main components of the braking system include the vacuum booster pump, master cylinder, wheel cylinders, brake pads, and brake discs. The vacuum booster pump provides assistance, making it easier for the driver to press the brake pedal. When the brake pedal is pressed, the master cylinder uses brake fluid to push the wheel cylinders, which then press the brake pads against the brake discs, slowing the vehicle down. 3. The wheel cylinders are commonly referred to as brake calipers, which contain multiple pistons. The brake fluid in the system needs to be replaced regularly. Brake fluid is prone to absorbing moisture. If the moisture content in the brake fluid is too high, it can reduce braking force and increase stopping distance. When the moisture content reaches 3%, the brake fluid must be replaced immediately. 4. After replacing the brake fluid, it is essential to bleed the air from the brake system lines. Otherwise, it can also affect braking force and stopping distance. During regular vehicle use, it is crucial to maintain your car on schedule. Proper maintenance ensures the vehicle remains in good condition and can extend its lifespan.

19

5

Share

How to Operate a Manual Transmission When Turning?

Why can't the tailgate button of the Baojun 730 open?

What is the 0-100km/h acceleration time of the VOGE 300RR?

Why is the system too lean at idle in the Tiguan?

Can I Renew My Motorcycle License Online?

Can a Flooded New Car Be Fully Restored?

What Causes a Hissing Sound When Braking?

What are the main replacements for car maintenance?

What colors does the Sylphy come in?

Where is the heating switch for the Kia K3 rearview mirror?

How to Turn on the Fog Lights on a Volkswagen Bora?