How to Operate a BMW for the First Time?

1 Answers
HopeAnn
07/30/25 9:36am
After entering the driver's seat, first adjust the angles and positions of the seat and steering wheel. The seat can be adjusted in multiple angles to ensure a comfortable driving posture. When the vehicle needs to start moving forward, shift the gear into "D" (Drive) and slowly release the brake to move forward. If you need to park for an extended period, shift the gear into "P" (Park), which is the parking gear. Shift the gear into "R" (Reverse), and the reverse lights will illuminate. Among the pedals below the driver's seat, the left one is the brake pedal, and the right one is the accelerator pedal—be sure to distinguish between them.
Was this review help?
16
1
Share
More Forum Discussions

What level of SUV is the Infiniti QX60?

The Infiniti QX60 is a mid-size SUV. In terms of body dimensions, it measures 5092mm in length, 1960mm in width, and 1750mm in height, with a wheelbase of 2900mm. SUV levels are generally categorized in descending order as follows: full-size SUV, mid-size SUV, compact SUV, and subcompact SUV. The body design of the new Infiniti QX60 remains unchanged, featuring prominent front wheel arches and sharp waistlines that create a dynamic body design. Additionally, the new QX60 is equipped with a brand-new multi-spoke two-tone wheel design. Compared to the front, the rear design of the new car has not changed much, except for the redesigned inner light chamber of the taillights, which incorporates LED light strips for higher visibility at night. Furthermore, the new model adds a shark fin antenna at the rear.
9
5
Share

Will points be deducted for occupying the overtaking lane for a long time?

Occupying the overtaking lane for a long time will result in point deductions. Prolonged use of the overtaking lane constitutes driving not in accordance with the designated lane, which is punishable by a 3-point deduction and a fine. On highways, occupying the overtaking lane for an extended period and not allowing vehicles behind to overtake is considered uncivilized and unethical behavior, and traffic police will impose penalties according to the law. Below is additional information: Overtaking Lane: The overtaking lane is located in the leftmost lane of the highway. It is only designated when the road meets the standards of a six-lane bidirectional highway. The overtaking lane is provided for vehicles that need to overtake or for vehicles traveling at the required speed. However, some drivers occupy the overtaking lane for long periods, forcing vehicles that need to overtake to do so from the slower-moving lanes. This increases the speed difference between the overtaking vehicle and the vehicles in the slower lanes, raising the risk of traffic accidents. Speed Limits: Highways should indicate the speed limits for each lane. The maximum speed should not exceed 120 km/h, and the minimum speed should not be lower than 60 km/h. On highways, the maximum speed for small passenger vehicles should not exceed 120 km/h, while other motor vehicles should not exceed 100 km/h, and motorcycles should not exceed 80 km/h. For roads with two lanes in the same direction, the minimum speed for the left lane is 100 km/h. For roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and for the middle lane, it is 90 km/h. If the speed limit indicated by road signs conflicts with the above lane speed regulations, drivers should follow the speed limit indicated by the road signs.
9
2
Share

How is China VI vehicle defined?

China VI is the abbreviation for the National Sixth Stage Emission Standards for Motor Vehicles, commonly referred to as China VI emission standards. It is a national vehicle emission standard that has been gradually implemented since the end of 2019. China VI imposes stricter requirements on the emissions of carbon monoxide, hydrocarbons, nitrogen oxides, and particulate matter compared to China V. Specific emission standard values can be found in the relevant national standards. The implementation of the China VI policy will significantly improve air quality. Furthermore, to ensure the automotive industry has sufficient preparation time to upgrade related vehicle models and powertrains, as well as to prepare for production, the China VI standard adopts a phased implementation approach, setting two emission limit schemes: China VI A and China VI B, which were implemented in 2020 and 2023, respectively. Additionally, key regions with special requirements for atmospheric environmental management may implement the China VI emission limits ahead of schedule.
19
4
Share

What are the precautions for driving a new car for the first time?

Don't push it too hard at first. Avoid changing the oil too early. Avoid long-distance running. Avoid high-speed driving. Avoid overloading. Avoid emergency braking. The running-in period of the car is quite critical, which directly affects the service life of the car in the future. Preheat the cold start, it is best to wait until the water temperature is preheated to above 40℃ before starting. The speed during the running-in period needs to be controlled, the driving speed must be controlled well, not too high, it is best to control it between 50~80km/h. Shift gears frequently. Do not use one gear for a long time. Start from a low gear and gradually shift to a higher gear, driving step by step. When braking, vehicles in the running-in period should first press the clutch pedal, and then press the brake pedal after the gear engagement is released.
8
4
Share

What is the Toyota Wildlander?

Toyota Wildlander is a new SUV model of the RAV4, named by Toyota as the Wildlander WILDLANDER. Compared to the previous RAV4, it features stylish Matrix LED headlights, an overall exterior design similar to Lexus, and is equipped with two power hybrid systems, making it a hybrid model. More details are as follows: 1. Exterior: The Wildlander retains a large number of chiseled polygonal shapes in its design. The front face incorporates an elegant and refined design, with the upper grille seamlessly integrated with the slim and sharp headlights on both sides, creating a sense of horizontal stretch. The lower grille adopts a spindle-shaped design, complemented by fog light grilles on both sides, showcasing the Wildlander's dual nature of toughness and elegance. 2. Interior: The dashboard features extensive horizontal polygonal designs, with a strong sense of layering from top to bottom. It is equipped with a 10.1-inch floating thin central control screen, and the air conditioning panel is designed to protrude outward for easy operation. The vehicle also comes with a kick-sensing electronic tailgate, offering five opening angles and memory functions. The trunk floor adopts a "double-layer, double-sided adjustable cover" design, which is waterproof and slip-resistant. 3. Intelligent Features: The Wildlander is equipped with Toyota's latest Toyota Safety Sense (TSS) system, achieving quasi-L2 level autonomous driving. This system primarily includes four major functions: PCS (Pre-Collision System), DRCC (Dynamic Radar Cruise Control System), LTA (Lane Tracing Assist System), and AHB (Automatic High Beam System).
3
0
Share

Can ETC devices be attached to the black area?

ETC devices can be installed on the black dotted area of the windshield, as long as they do not obstruct the driver's view and can sense the detection equipment of the toll station. However, installing them outside the black dotted area of the windshield has drawbacks, such as reduced solar charging capability of the ETC device, which may lead to power depletion over time. Correct installation position for ETC: For small vehicles like cars and vans, the ETC card and OBU device should be installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle part. ETC installation position requirements: the height should not be less than 1.2 meters or more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing film of the OBU and attach it to the installation position. Press firmly with your hand for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is properly inserted into the OBU device.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.