How to Open Windows with the Remote Control for Teana?

How to Determine the National Emission Standard of a Vehicle?

Here are the methods to check the national emission standard of a vehicle: 1. The simplest and most direct way is to look at the front windshield, where the vehicle's environmental protection label is usually clearly marked. 2. Log in to the Motor Vehicle Exhaust Pollution Supervision and Management website: Motor Vehicle Environmental Protection Network, to conduct a query. 3. Refer to the documents provided by the dealer at the time of purchase. Most of the information can be found on the vehicle conformity page or the first page of the vehicle's certificate of conformity. 4. If you still can't find it, take the vehicle registration form or a copy to the vehicle management office for inquiry. 5. Make a rough estimation based on the year the vehicle was registered, as follows: (1) Most vehicles registered after 2008 are National IV. (2) Vehicles registered in 2007 could be either National III or National IV. (3) Vehicles registered before 2007 are mostly below National IV, i.e., National II or National III. (4) Vehicles registered before 2005 are mostly National II. 6. It's important to note that if there's a discrepancy between the vehicle's product certificate and the website query, the standard found on the website should be used as the final reference.

17

1

Share

What does TC mean on a vehicle?

TC stands for Traction Control System, which improves the vehicle's passability. When the ABS anti-lock braking system detects that some wheels are slipping, it applies braking to the slipping wheels to prevent the loss of traction on those wheels. When the system is active, the yellow TC indicator light on the dashboard flashes to alert the driver. Below is an introduction to the Traction Control System: 1. The Traction Control System, also known as the Track Control System. When braking on slippery surfaces, the wheels may slip, or even cause the vehicle to lose directional control. Similarly, when starting or accelerating rapidly, the drive wheels may also slip, which can lead to loss of control on icy or other slippery surfaces, posing a danger. The Traction Control System is designed to address this issue. 2. The Traction Control System relies on electronic sensors to detect when the driven wheels' speed is lower than that of the drive wheels (a sign of slipping). It then sends a signal to adjust ignition timing, reduce throttle opening, decrease acceleration, downshift, or apply braking to the wheels, thereby preventing further slipping. 3. The Traction Control System not only enhances driving stability but also improves acceleration and climbing ability.

18

0

Share

What Causes the Windshield Wiper Not to Spray Water?

Common reasons for windshield wipers not spraying water include clogged nozzles or hoses; motor, water pump, fuse, or wiring failures; or running out of windshield washer fluid. If the nozzles or hoses are clogged, you can try unclogging them yourself. If the washer fluid is empty, simply refill it. For other issues, visit a 4S shop for inspection and repair. Below are solutions for windshield wipers not spraying water: 1. First, determine whether the issue is on one side or both sides. If only one side is affected, it is usually due to a clogged nozzle on that side. There are two solutions: (1) Use a sewing needle, pin, or very thin wire to poke through the clog. (2) Spray out the remaining washer fluid, then use an air gun to blow through the clogged nozzle. 2. If both sides have issues, it may be due to low washer fluid, hose problems, clogged filters, or motor issues. Follow these steps: (1) First, check if the washer fluid is low and refill it if necessary. (2) Inspect the hose for damage or loose connections. (3) Check the motor and wiring. Have someone press the spray button while you listen near the engine bay for the motor sound. If the sound is weak, the motor may be faulty. If there is no sound and the wiring is fine, the motor itself is likely the issue. (4) If the motor is the problem, first check if the filter is clogged. A clogged filter can be cleaned—for example, by disconnecting the hose from the nozzle, opening the washer fluid reservoir, and using an air gun to blow through the hose, forcing debris out of the filter. For other issues, consult a professional at a 4S shop.

2

0

Share

When to Use ECO Mode?

ECO is used when you want to reduce unnecessary fuel consumption. When ECO is activated, the vehicle will make adjustments: the throttle opening corresponding to the same accelerator pedal depth will be smaller, and the transmission will shift up earlier. The purpose is to control the engine speed through reasonable gear selection, thereby reducing unnecessary fuel consumption. Below is an introduction to ECO mode: 1. ECO mode mainly functions when the vehicle is moving, controlled by the computer to achieve its effect. Therefore, it does not work during idle parking or in manual mode. 2. When the vehicle encounters situations like climbing a hill that require overcoming certain resistance and high torque output, the ECU control unit will prioritize ensuring sufficient power to drive the vehicle, and ECO mode will not work. When driving at high speeds exceeding 120 km/h, the vehicle needs better power output, and since the speed has far exceeded the economical speed, ECO mode cannot play a role in saving fuel.

1

Share

Why Can't Refrigerant Be Added to the Car Air Conditioner?

Reasons why refrigerant cannot be added to the car air conditioner: If the operation method is correct and pressure tests as well as vacuum extraction have been performed, the inability to add refrigerant may be due to system blockage, a clogged dryer, or compressor failure. Various reasons why refrigerant cannot be added to the high or low pressure sides of the car air conditioner: 1. If high and low pressure readings are visible, it indicates that the issue of blocked high and low pressure pipe connections can be ruled out. 2. If the low pressure side is high and the high pressure side is low, it may indicate compressor damage. 3. A dirty condenser with poor heat dissipation and a failed dryer bottle can also cause this phenomenon.

6

3

Share

How to Remove the Rear Seats of a Car?

Methods for removing the rear seats of a car: On both sides of the rear seat near the windows, there are handles. Pulling these handles allows the backrest of the rear seat to fold forward. For the seat cushion of the rear seat, in most cases, you can press the cushion towards the rear of the car and lift it upwards to remove it. Installation of rear seat covers: 1. Remove the rear seat headrests, then place the backrest cover over the backrest. The top of the seat cover is secured with hooks, while the bottom is fixed by inserting cushion clips into the gap between the backrest and the seat cushion. 2. Place the seat cushion cover over the rear seat cushion and secure it again by inserting cushion clips into the gap between the backrest and the seat cushion. 3. Reinstall the rear seat headrests and cover them with headrest covers, securing them with clips.

20

3

Share

How to Open Windows with the Remote Control for Teana?

How to Determine the National Emission Standard of a Vehicle?

What does TC mean on a vehicle?

What Causes the Windshield Wiper Not to Spray Water?

When to Use ECO Mode?

Why Can't Refrigerant Be Added to the Car Air Conditioner?

How to Remove the Rear Seats of a Car?

How to Start with a Spare Key?

How to Replace the Battery in an Old Magotan Remote?

How to Check the Manufacturing Date of a New Car?

How many kilometers should a car drive before changing the engine oil?