How to open USB drive in Volkswagen Tacqua?

What Causes Water Dripping Under the Car Exhaust Pipe?

Water dripping from the car exhaust pipe is a normal phenomenon. When gasoline burns completely, it produces water vapor and carbon dioxide. At lower temperatures, the white smoke emitted from the exhaust pipe is water vapor. As the water vapor flows through the metal pipe, it condenses into water droplets, which is an indication of efficient gasoline combustion. The exhaust pipe is a device designed to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. Exhaust pipes are mainly used in light vehicles, micro vehicles, buses, motorcycles, etc. When the ambient temperature is low, water vapor condenses into water droplets on the inner walls of the exhaust pipe and flows out along the pipe. This phenomenon is especially common in winter when the external environment is colder and the air humidity is high. After the vehicle is running, the temperature difference between the inside and outside of the engine is significant, making it more likely for water to drip from the exhaust pipe.

15

0

Share

What are the approval standards for county-level Class III driving schools in 2021?

2021 county-level Class III driving school approval standards require vehicles, training grounds, and personnel. Below are the relevant requirements for Class III driving schools: 1. Vehicles: Only one vehicle type can be applied for, with a minimum of 10 vehicles of that type required. 2. Training grounds: The driving course must have all nine subjects fully compliant. A fifth vehicle requires one pylon garage. The length of the in-field road should be calculated as number of training vehicles × 25 meters. Pylon garages, parallel parking spaces, speed/width limit gates etc. must be equipped with metal gantry frames. 3. Personnel: Each training vehicle requires one practical instructor, and every 10 vehicles require one theory instructor. All teaching staff must hold valid driving instructor certificates.

1

0

Share

Does a new car need carbon deposit cleaning at 20,000 kilometers?

A new car does not require carbon deposit cleaning at 20,000 kilometers. Under normal circumstances, it generally needs to be cleaned every 30,000 to 50,000 kilometers, and cleaning should not be too frequent. The reasons are as follows: Cleaning agents are corrosive and can corrode metal parts inside the engine, leading to engine malfunctions. If the mileage is relatively long, cleaning the engine can reduce engine oil pressure and cause issues like cylinder gasket leaks, resulting in significant damage. Precautions for car carbon deposit cleaning: The concentration of the cleaning agent must be adjusted. Different levels of oil contamination require different concentrations. Additionally, after cleaning, it is essential to promptly remove any residue to prevent residual liquid from corroding the engine. When using cleaning agents, read the instructions carefully and follow the guidance of professionals. Cleaning methods can include ultrasonic cleaning, spraying, hot soaking, and manual wiping. To achieve effective cleaning, the environment is crucial. It is best to clean under temperature conditions of 55 to 80 degrees Celsius.

8

0

Share

What models does Wuyang-Honda 150 have?

Wuyang-Honda 150CC motorcycles include the Phantom and Biao Ying models. The Wuyang-Honda Phantom 150 is a small-displacement street bike launched in 2021, serving as an upgraded version of the older Phantom 150. Based on its predecessor, this model has upgraded from a carburetor fuel system to an electronic fuel injection system, features full LED lighting, a fully digital display, and meets the National IV emission standards. The Wuyang-Honda Biao Ying 150 motorcycle boasts a dynamic appearance, strong power, and quick acceleration, making it a good choice for commuting. However, it lacks a balance shaft, which theoretically means it vibrates slightly more than the Phantom. Nonetheless, it is equipped with a CBF engine, which is not too bad. Wuyang-Honda Motorcycle (Guangzhou) Co., Ltd. is a Sino-Japanese joint venture established in 1992 with a contract duration of 30 years. It is jointly invested by Guangzhou Automobile Group Co., Ltd., Honda Motor Co., Ltd. of Japan, and Honda Motor (China) Investment Co., Ltd.

20

0

Share

How long after purchasing a new car can it be registered on 12123?

Generally, a newly purchased car should be registered on the 12123 platform within 3 months. If this period is exceeded, a certain late fee must be paid according to regulations. Once the license plate is obtained, the car can be directly registered. After completing the license plate registration, the owner can directly bind the vehicle information on the Traffic Management 12123 APP. Below are the relevant details: Registration review time: The review process may take up to 7 working days, with a maximum of 15 days, depending on the number of registration applications being processed. Solutions if registration fails: Deactivate the Traffic Management 12123 account; then re-register the account and select the region consistent with the vehicle's registration certificate; apply again for the new car registration. This is because vehicle management in each region is handled by the local Vehicle Management Office (VMO), and vehicle records are stored there. For example, a car registered in Guangzhou is managed by the Guangzhou VMO, and its records are kept there. If the Guangxi VMO does not have the vehicle's records, it cannot register the new car or handle other related procedures.

4

5

Share

Is the Mercedes-Benz E-Class domestically produced or imported?

Both domestically produced and imported models are available. The following are the differences between the domestically produced and imported Mercedes-Benz E-Class cars: 1. Body design: The imported Mercedes-Benz has body dimensions of 4947*1860*1470mm with a wheelbase of 2939mm, while the domestically produced Mercedes-Benz has body dimensions of 5065mm, 1860mm, 1490mm with a wheelbase of 3079mm. The overall size of the domestically produced model is larger than the imported one. 2. Powertrain: Both the imported and domestically produced Mercedes-Benz E-Class are equipped with 1.5T and 2.0T turbocharged engines. The imported 2.0T engine is mainly used in coupe models, while the domestically produced models offer choices such as luxury, fashion, and sport versions. 3. Vehicle configuration: The imported Mercedes-Benz has additional features like rear and side sunshades, xenon headlights, and interior reading lights compared to the domestically produced model. On the other hand, the domestically produced model comes with an automatic braking system, blind spot monitoring, panoramic cameras, and a panoramic sunroof.

2

3

Share

How to open USB drive in Volkswagen Tacqua?

What Causes Water Dripping Under the Car Exhaust Pipe?

What are the approval standards for county-level Class III driving schools in 2021?

Does a new car need carbon deposit cleaning at 20,000 kilometers?

What models does Wuyang-Honda 150 have?

How long after purchasing a new car can it be registered on 12123?

Is the Mercedes-Benz E-Class domestically produced or imported?

Consequences of Leaving Car Doors Unlocked Overnight?

Where is the engine number stamped on the Buick Excelle?

What are the impacts of not washing your car after snow?

How to read 2.5 on a car air pump?