···
Log in / Register

How to open the Volkswagen Polo trunk from the inside?

4 Answers
DelVivienne
08/30/25 7:16am

The method to open the Volkswagen Polo trunk from the inside is to use the switch inside the car or the key to open the trunk. If the trunk lid is closed but not locked, when the driving speed reaches more than 7 kilometers per hour, the trunk lid will automatically lock. After the vehicle is stationary, open the door or press the central door lock unlock button on the driver's side door to unlock the trunk lid. The Volkswagen Polo has a length, width, and height of 4053mm, 1740mm, and 1449mm respectively, with a wheelbase of 2564mm, and is equipped with a 5-speed manual transmission. This car is a compact sedan, using a 1.5L naturally aspirated engine, with a maximum torque of 145 Nm and a maximum horsepower of 113 hp.

Was this review help?
11
0
Share
DiKai
09/12/25 4:16am

I've been driving a Volkswagen Polo for several years, and opening the trunk from the inside mainly involves pressing a button on the driver's side door panel. It's usually marked with a small icon of an open trunk, and a light press will unlock it. If the button doesn't respond, you can try accessing it from the rear seats: first, fold down the rear seats (there's a pull ring or latch under the seat), climb into the trunk, and feel for a plastic handle on the top or side—pull it outward to open the lid. Another scenario is when the key is in the car; you can press the trunk button on the key directly. I recommend checking the switch's flexibility during every maintenance to avoid it getting stuck. In winter, make sure the button doesn't freeze, and clean dust regularly to maintain its responsiveness. Remember, don't press the button randomly while driving to prevent accidents.

Was this review help?
20
1
Share
Expand All
NicoleMarie
10/26/25 5:04am

As someone who enjoys tinkering with cars, I find the trunk interior opening mechanism of the Volkswagen Polo to be ingeniously designed. The electronic method involves triggering the latch release via a button located near the driver's left leg, typically positioned on the door trim panel with clear iconography. In case of electrical issues, there's a mechanical backup: after folding down the rear seats to access the trunk, locate the emergency release handle on the inner top section—a simple pull forces the lock open. I've seen some car enthusiasts modify the button leading to malfunctions, so it's crucial not to tamper with the wiring casually. For safety, familiarizing yourself with these features is highly practical, such as quick opening when loading items. It's advisable to regularly test these functions to ensure they work properly.

Was this review help?
16
0
Share
Expand All
LaKeegan
12/09/25 5:24am

When I first got my driver's license and drove a Volkswagen Polo, I found it quite novel to open the trunk from inside. Simply put, look for a button with a trunk logo near the driver's seat and press it to open the lid. In case of an emergency, such as dropping something inside, fold down the rear seats (there are handles between the seats for easy pulling), climb into the back, and pull the release lever inside to unlock it. At first, I was a bit clumsy, but after a few tries, I got the hang of it. Remember not to operate it while driving—safety first.

Was this review help?
7
5
Share
Expand All
More Forum Discussions

What Are the Solutions for a Submerged Car?

The solutions for a submerged car are: 1. Tow the car to a dry area; 2. Tow the car to a repair facility for further handling. Reasons for a car stalling in water: 1. Moisture or water ingress causing a short circuit in the high-voltage distribution system; 2. Water entering the exhaust pipe; 3. Water entering the air intake, specifically at the air filter; 4. Engine damage due to water ingress, leading to stalling. Precautions for driving in rainy weather or through waterlogged areas: 1. Be extra cautious when the water depth exceeds the front bumper; 2. Do not continue driving if the water depth exceeds the engine hood; 3. Avoid driving at high speed through ditches or puddles; 4. Maintain a sufficient safe distance.
15
3
Share

How to Enable the Auto-Lock Feature for Honda Civic?

Honda Civic's auto-lock feature can be enabled by accessing the central control panel settings and turning on the auto-lock function. Taking the 2021 Honda Civic as an example, its body dimensions are: length 4517mm, width 1799mm, height 1434mm, with a wheelbase of 2700mm, a fuel tank capacity of 47 liters, and a curb weight of 1343kg. The 2021 Honda Civic features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 177PS, a maximum power of 130kW, and a maximum torque of 220Nm, paired with a continuously variable transmission (CVT).
14
3
Share

What is the starting method for an automatic transmission car?

The starting method for an automatic transmission car is: 1. Turn the ignition key to the power position to allow the car's computer system to begin self-checking for about 6 seconds; 2. Press the foot brake, shift the gear from P to N, then turn the ignition key to the start position to ignite the engine after releasing the foot brake; 3. Press the foot brake, release the handbrake, shift the gear from N to D, and slowly release the foot brake. An automatic transmission car is equipped with an automatic gearbox, and its working principle is: Through the coordination of the torque converter and gear transmission system, it automatically shifts gears based on the car's speed, engine RPM, and power load. The hydraulic control device adjusts the shifting timing by controlling the transmission fluid volume according to the throttle opening.
8
1
Share

What is the method for using car lights?

The method for using car lights is: 1. Turn the left light control switch forward one notch for parking lights; 2. Turn it forward two notches for low beam; 3. Push the light control lever forward once for high beam; 4. Lift the light control lever upward once for the right turn signal. Precautions for using car lights are: 1. Turn on low beam when driving at night; 2. Do not use high beam when a following vehicle is driving close to the vehicle in front in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, alternate between high and low beams to signal.
16
5
Share

Can Tap Water Be Used as Car Windshield Washer Fluid in Summer?

Tap water should not be used as car windshield washer fluid in summer because it dilutes the washer fluid, reduces its effectiveness, and may damage the wiper blades. The functions of windshield washer fluid include: 1. Cleaning the windshield to maintain clear visibility; 2. Providing antifreeze and defogging properties; 3. Offering anti-static, lubrication, and anti-corrosion effects. The steps to add windshield washer fluid are: 1. Open the engine hood and locate the washer fluid filler port; 2. Remove the cap and pour the washer fluid into the reservoir; 3. Observe the fluid level until it reaches the marked line. The characteristics of car windshield washer fluid are: 1. Cleaning capability; 2. Antifreeze performance; 3. Defogging performance.
15
4
Share

What Causes a Car to Lack Power When Climbing Hills?

There are several reasons why a car may lack power when climbing hills: Fuel Quality Issues: If the fuel used is of poor quality, containing excessive impurities or water, it can lead to insufficient power. Low-quality fuel can easily clog components with small openings or filtration functions, such as the fuel filter, fuel pump screen, and fuel injectors, resulting in poor fuel supply and reduced engine performance. High Gear Selection: When climbing hills, using too high a gear makes it difficult to increase the engine speed. For manual transmission vehicles, it is generally advisable to use gears 1 to 3 depending on the situation. For automatic transmission vehicles, if the slope is too steep, it is recommended to use the L gear, 1st gear, or 2nd gear. Carbon Buildup: Excessive carbon deposits on the throttle body and intake pipes can restrict airflow, leading to incomplete fuel combustion, which directly affects power output and increases fuel consumption. If the fuel injectors are clogged, fuel atomization may be poor or nonexistent, causing a cylinder misfire and reducing engine output power, resulting in insufficient power. Low or Unstable Idle Speed: If the vehicle's idle speed is too low or unstable, it can easily cause a lack of power when climbing hills. There are many potential causes for such issues, including wiring problems, sensor faults, engine combustion issues, or air intake leaks. External faults can also have an impact. Therefore, it is essential to identify the root cause before proceeding with further inspections. Faulty Ignition Coil: A damaged ignition coil can cause misfiring or complete failure to ignite in one cylinder, leading to insufficient power. This is often accompanied by noticeable engine vibrations, which can be easily felt inside the vehicle.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.