How to open the trunk of Volkswagen Bora?

How many kilometers can the Accord Hybrid travel in pure electric mode?

The pure electric mode range of the Accord Hybrid is less than 10km. The above data represents the range under fully charged conditions, as officially published by NEDC. The Accord Hybrid is a mid-size car under Honda, with dimensions of 4908mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. The range is directly related to the three-electric system (battery, electric drive, and electric control) of electric vehicles. Battery System: The capacity of the power battery directly determines the range. Additionally, excessively high or low temperatures in the battery system can also affect the range. With the same battery capacity, more stable battery temperatures better ensure the range. Electric Drive System: This mainly includes the drive motor, controller, inverter, and reducer. Its efficiency is determined by the ratio of input power to output power. When the battery capacity is fixed, under the same voltage, the output energy is determined by the efficiency of the drive system. Automakers strive to optimize motor and control efficiency to reduce energy consumption and increase range. Vehicle Control System: This primarily coordinates the relationship between the battery, drive system, and chassis braking energy recovery. Under frequent acceleration and deceleration conditions, the proportion of energy recovery (braking energy recovery) can be dynamically adjusted based on the battery status and braking needs, thereby improving energy utilization efficiency. In addition, the braking energy recovery strategy of electric vehicles will directly increase the vehicle's driving range.

19

2

Share

What is the AE86?

AE86 is a Japanese Toyota car. Introduction to AE86: The AE86 is a Japanese Toyota car, which is the fifth-generation model of the Toyota COROLLA first produced in 1983. It is small in size, relatively lightweight, and not expensive, making it very popular in the 1980s and 1990s. It features a black-and-white color scheme, and when the headlights are turned on at night, the front cover opens. This car uses rear-wheel drive and has performed excellently in many competitions. AE86 is just the chassis code for this model, and it also comes in two-door and two-door hatchback versions, all called AE86. The official name of this car is "Corolla" or it can be referred to as the fourth-generation Corolla. Toyota Corolla: The predecessor of the Corolla is the AE86. The Corolla's body size has significantly increased compared to the previous generation Corolla, presenting a wide and low stance while also creating a spacious interior. The Corolla comes in two engine displacement models, 1.6L and 1.8L. Whether in terms of appearance, configuration, or power, the Corolla has seen significant improvements over the old Corolla. The Corolla is the latest model in its series.

11

2

Share

Is it better to use 92 or 95 octane gasoline for the Honda Avancier?

If you cherish your vehicle and can afford the cost, it is best to use 95 octane gasoline. Here are the detailed explanations: 1. The manufacturer of the Honda Avancier requires the use of 92 octane or higher gasoline that meets national standards, and a fuel additive should be added every 5,000 kilometers. In fact, the Avancier can use either 92 or 95 octane gasoline, but there is not much difference in terms of fuel economy. 2. The Earth Dreams engine of the Avancier is designed with a minimum applicable gasoline octane rating of 92, which means using gasoline below 92 octane will cause engine knocking. 3. Using 92 octane may occasionally cause knocking, while using 95 octane will definitely prevent knocking. Of course, the chance of occasional knocking is very low, with 0 to 2 occurrences in 500 ignition cycles at 1,000 RPM, so the damage to the engine is minimal. 4. Although higher octane gasoline has better anti-knock performance, it does not necessarily mean that the highest 98 octane gasoline is suitable for all engines. If the engine is designed for a minimum of 95 octane, then using 98 octane is acceptable. However, for the Avancier, which is designed for a minimum of 92 octane, using 98 octane may result in incomplete combustion of the gasoline, not only wasting energy in the fuel but also increasing carbon deposits.

20

5

Share

Where is the tire pressure monitoring displayed on the 2021 Fit?

2021 Fit's tire pressure monitoring is displayed on the vehicle's dashboard. There are three common types of tire pressure monitoring methods: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire's air pressure. It uses a wireless transmitter to send the pressure information from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. When the tire pressure is too low or there is a leak, the system will automatically issue an alert. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speed between the tires, the system monitors the tire pressure. The indirect tire pressure alert system essentially relies on calculating the tire's rolling radius to monitor the pressure. Introduction to the Tire Pressure Monitoring System (TPMS): It combines the advantages of the two systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of the indirect system, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data on the actual pressure in all four tires like a direct system.

18

4

Share

What are the differences between joint venture cars and domestic cars?

There are six main differences between joint venture cars and domestic cars: 1. Styling: In terms of exterior design, domestic cars are largely in the imitation stage, while joint venture cars may combine their own product advantages and make some improvements based on domestic consumer market demands, making them more market-friendly. 2. Engine technology: In some specialized automotive technologies, domestic car technology may have started development later, so joint venture brands may have an advantage in this area. Except for a few domestic brands with their own unique engine technologies, most domestic cars still rely on imported engine technologies. 3. Company attributes: Domestic cars are designed and manufactured by Chinese companies, while joint venture cars are mostly funded by Chinese partners who provide land, factory usage rights, and capital, while foreign investors contribute the brand and technology to jointly manufacture cars. 4. Features: Joint venture cars in the Chinese market often undergo some modifications, with basic performance features remaining unchanged, but some configurations may be reduced compared to the same models abroad. Domestic cars, due to their later start, may not match joint venture cars in terms of features. 5. After-sales maintenance: Domestic car brands focus on comfort, but due to their shorter development period compared to joint venture cars, their maintenance processes and systems are not as well-established as those of joint venture brands. 6. Brand influence: Joint venture cars typically rely on foreign automakers for technology and domestic automakers for labor. Therefore, compared to domestic cars, joint venture cars offer more technical reliability. The level of brand influence also affects the car's resale value.

12

2

Share

What Kind of Mercedes-Benz is Called 'Big Ben'?

Big Ben refers to the Mercedes-Benz S-Class, which is the most luxurious sedan in the Mercedes-Benz lineup. The S-Class is a large luxury sedan, and its competitors include the BMW 7 Series and Audi A8. The current Mercedes-Benz S-Class has 5 models available, equipped with two types of engines: a low-power 2.5-liter turbocharged engine and a high-power 3.0-liter turbocharged engine. The low-power 2.5-liter turbocharged engine delivers a maximum horsepower of 367 PS and a peak torque of 500 Nm. The engine's maximum torque is achieved between 2000 and 4000 rpm, while the maximum power output occurs between 5500 and 6000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission (9AT). The high-power 3.0-liter turbocharged engine produces 435 horsepower and a peak torque of 520 Nm. The engine's maximum torque is available between 1800 and 5800 rpm, while the maximum power output is achieved at 6100 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is also paired with a 9-speed automatic transmission (9AT). The Mercedes-Benz S-Class uses a double-wishbone independent suspension at both the front and rear. This setup significantly enhances the car's handling and ride comfort.

13

2

Share

How to open the trunk of Volkswagen Bora?

How many kilometers can the Accord Hybrid travel in pure electric mode?

What is the AE86?

Is it better to use 92 or 95 octane gasoline for the Honda Avancier?

Where is the tire pressure monitoring displayed on the 2021 Fit?

What are the differences between joint venture cars and domestic cars?

What Kind of Mercedes-Benz is Called 'Big Ben'?

How to Use the Three Valves on an LNG Vehicle?

How to Replace the Air Filter in a Volkswagen CC?

What Problems Can Excessive Carbon Deposits Cause to a Vehicle?

How often should the Levin be serviced?