How to Open the Trunk of the New Excelle?

3 Answers
Gabrielle
07/30/25 12:16am
The New Excelle trunk can be opened in two ways: 1. Press the button on the driver's side door trim panel to open the trunk; 2. Use the remote key to open the trunk. The New Excelle is a compact car with a body length of 4609mm, width of 1798mm, height of 1486mm, and a wheelbase of 2640mm. It is equipped with two turbocharged engines, a 1.0T and a 1.3T, both in three-cylinder configurations. The 1.0T engine delivers a maximum power of 125 horsepower, paired with either a 6MT or a 6-speed dual-clutch transmission. The 1.3T engine produces a maximum power of 163 horsepower, matched with a 6AT automatic transmission.
Was this review help?
4
2
Share
SanHailey
08/16/25 4:31am
Opening the trunk of the new Buick Excelle is very easy. As an owner, I often do this. There's a dedicated trunk button on the remote key with an icon printed on it—just press it lightly and the trunk pops open. If I'm outside the car, I can simply walk to the trunk lid and pull the handle to open it; some models even come with a sensor that allows you to open it with a foot swipe. Inside the car, it's even more convenient—there's a button on the left side of the driver's seat console. Press it when the car is in Park or stopped, and the trunk unlocks. It's recommended to regularly check if the buttons are responsive and to clean them if dusty to avoid accidental operations. Safety first—always ensure the car is completely stopped before opening the trunk to prevent accidents, and listen for the locking sound when closing to avoid items falling out. New drivers will get the hang of it after a few practices—the overall design is user-friendly and practical.
Was this review help?
6
5
Share
Expand All
SamuelDella
10/19/25 6:58am
From a practical perspective, opening the trunk via the remote key button is the simplest and most direct method. The button is prominently located on the side of the key—just press it once to automatically unlock the system. Inside the car, there’s also a dedicated button near the driver’s door on the center console; pressing it releases the electromagnetic lock. Some models support keyless opening, where a sensor under the bumper detects a foot motion. Over time, battery depletion may cause failure, so remember to replace the key battery annually to ensure stable signal transmission. The trunk switch is lightweight—keep hands clear of the bottom to avoid pinching when operating, and close the door steadily to maintain a proper seal. Regular maintenance of these components can extend their lifespan, making it easier to transport large items during travel.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

Can Plug-in Hybrid Vehicles Operate Without Charging

Plug-in hybrid vehicles can operate without being plugged in as long as there is fuel available. Principle: For hybrid vehicles, there are mainly two types: plug-in hybrids and mild hybrids. True hybrid models are plug-in hybrids. For plug-in hybrid vehicles, they function both as fuel-powered cars and electric vehicles. If not charged, they operate in fuel-powered mode. Plug-in hybrid vehicles can also run in electric mode if there is no fuel but the battery has charge. Advantages: Plug-in hybrid vehicles use electric power for propulsion, typically offering a range of around 100 kilometers. Driving in electric mode is cost-effective, making charging a more economical option.
8
4
Share

What is the tire model specification of the Changan CS55?

The tire models for the Changan CS55 are 225/60R17 and 225/55R18. It is a model under Changan Automobile, with exterior dimensions of 4500mm in length, 1855mm in width, and 1690mm in height, a wheelbase of 2650mm, and a body structure of a 5-door, 5-seat SUV. The Changan CS55 is equipped with a 1.5T turbocharged engine, paired with a 6-speed manual transmission and a 6-speed automatic transmission, delivering a maximum horsepower of 156, a maximum power of 115 kW, a maximum power speed of 5500 rpm, and a maximum torque of 225 Nm.
17
1
Share

Should You Shift to Neutral When Stalling on a Slope?

When a car stalls on a slope, it is necessary to shift the gear to neutral and then restart the engine. Here are some remedial measures for stalling on a slope: 1. When the vehicle stalls, immediately apply the emergency brake to prevent rolling back, then shift to neutral and engage the handbrake. 2. Quickly calm down, pause for a few seconds, and think about the sequence of operations for restarting. 3. When the car body starts to shake violently, hold the clutch steady and do not move it, then slowly release the brake. If the car starts to move forward, do not lift the clutch further; if the car remains stationary, lift the clutch a bit more until the car starts to move forward.
5
4
Share

Why does the car fail to start and make abnormal noises?

Car starting failure accompanied by abnormal noises can be caused by insufficient battery power, faulty spark plugs or ignition coils, engine motor idling, or poor fuel quality. Insufficient battery power: Check the battery's power status and charge it in time, as insufficient power can reduce its service life. Faulty spark plugs or ignition coils: Inspect the condition of the spark plugs and ignition coils, and replace them if necessary. Engine motor idling: Check the working condition of the engine and transmission, and inspect whether the flywheel ring gear is slipping. Poor fuel quality: Check the fuel quality and use guaranteed-quality gasoline to minimize damage.
19
2
Share

What is the general air pressure for motorcycles in bar?

Motorcycle tire pressure is generally between 2.2 to 2.5 bar. The front tire pressure can be maintained at 2.2 bar, while the rear tire pressure can be kept at 2.5 bar. Importance of motorcycle tire pressure: Motorcycle tire pressure is extremely important during regular use. It should be measured with a dedicated pressure gauge. Insufficient tire pressure increases rolling resistance, while excessive pressure can affect the vehicle's grip and increase the risk of tire blowouts. Tire pressure adjustment: During regular use, tire pressure may vary with external temperature changes. Within the normal range, it's advisable to slightly reduce tire pressure in summer to prevent blowouts, while slightly increasing pressure in winter.
19
0
Share

How to Refill Automotive Refrigeration Oil?

Automotive refrigeration oil can be refilled using the following methods: 1. Refill through the compressor—start the compressor at idle speed, operate the control system at the coldest setting and highest fan speed for 20 to 30 minutes to allow the oil to return to the compressor. Then, turn off the engine, release the refrigerant, remove the compressor from the vehicle, and drain the old oil. Directly refill or top up with new oil. 2. Use a specialized vacuum tool to extract air from the air conditioning system, then utilize negative pressure to draw the refrigeration oil into the compressor through a yellow hose. The required amount of refrigeration oil varies by vehicle model. The exact refill quantity can be found on the compressor's nameplate or in the vehicle's user manual. Owners should simply follow the specified amount to add the refrigeration oil.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.