How to Open the Trunk of the Buick Verano?

How many points are deducted if the handbrake is not fully released during the uphill start in Subject 2?

If the handbrake is not fully released during the uphill start in Subject 2, 10 points will be deducted. Below are the specific details about Subject 2: 1. Subject 2 Examination Opportunities: Candidates are allowed one attempt for the Subject 2 examination. If they fail, they can retake it once, meaning there are a total of two opportunities. If they do not participate in the retake or fail the retake, the examination process ends, and the applicant must schedule a new examination after ten days. Within the validity period of the driving skill test permit, the number of Subject 2 examination appointments cannot exceed five. If the fifth examination appointment still results in failure, the passing scores of other subjects will be invalidated. 2. Subject 2 Examination Content: Reversing into a parking space (reverse parking), stopping and starting on a slope (uphill start), parallel parking, driving through curves, and turning at right angles (Note: Some regions include a sixth item—highway toll card collection).

8

0

Share

How to Adjust the Seat for Subject 2?

After getting into the car, pull the seat all the way forward to the limit, then move it back one notch at a time. Remember the number of notches the seat has moved. Adjust the seat height according to your height; shorter students can place a cushion. The line of sight should not be blocked by the steering wheel, and you should be able to clearly see the dashboard and the road ahead. Below are the detailed steps: 1. Seat Position: The adjustment button is located under the seat. Pull the adjustment lever and use your feet to move the seat forward or backward. Ensure that you can steer smoothly and operate the clutch and brake pedals comfortably. The final position should be based on the student's comfort. 2. Arm Position: Stretch your arms straight out, and your wrists should just rest on top of the steering wheel. This ensures flexible control. 3. Leg Position: Place the balls of your feet on the clutch and brake pedals. Your knees should be slightly bent, and your legs should not be fully extended when the pedals are fully depressed.

2

0

Share

What is the load capacity of the Nissan Sylphy trunk?

The load capacity of the Nissan Sylphy trunk is 500 jin (approximately 250 kg), but it is best not to exceed this limit. Exceeding 500 jin may affect the shock absorbers, making them prone to damage. Sylphy trunk dimensions: The Sylphy trunk has a depth of 985mm, a width of 980mm, a maximum width of 1610mm, a height of 610mm, and a volume of 510L. The new Sylphy trunk space is relatively flat, and its height is advantageous among vehicles in the same class. Vehicle load calculation: The vehicle load description does not specify the trunk's load capacity. The total vehicle load (including passengers and trunk) is approximately 420KG. For specific details, you can check the vehicle's driving license copy, where the total mass minus the curb weight equals the load capacity. Alternatively, refer to the technical specifications at the end of the vehicle's user manual: the technical maximum load mass minus the maximum curb weight equals the load capacity.

13

1

Share

What is the method to prevent stalling during uphill start in Subject 3?

The method to prevent stalling during uphill start in Subject 3 is as follows: 1. Observe before starting: Observe the conditions before starting, and when it's suitable to start, release the clutch. This way, you won't be nervous due to passing vehicles, allowing for a smooth start. 2. Find the clutch's semi-engagement point before starting: Gently lift the clutch to the semi-engagement point, then hold it steady. Once the car starts moving forward, slowly release the clutch and gently press the accelerator to start. 3. Seize the right moment to shift gears: Mastering the timing for gear shifting isn't difficult. Each car's shifting timing varies slightly, so it should be based on specific conditions like speed and road conditions. During the test, avoid staring at the tachometer constantly. With more practice, you'll quickly grasp the appropriate timing for gear shifting.

2

4

Share

Where is the battery located in the Mercedes-Benz R300?

The battery of the Mercedes-Benz R300 is located under the hood, in the upper left corner of the engine compartment, next to the front bumper. Steps to replace the battery: Open the driver's door of the Mercedes-Benz R300; Pull the hood release lever located on the left side of the driver's leg area; Lift up the engine hood of the Mercedes-Benz R300; Use the support rod to secure the engine hood in place, ensuring it is firmly supported to avoid any hazards during the operation. Precautions for battery replacement: When replacing the battery, it is necessary to use an AGM battery with the same specifications as the original. If replacing the battery with the power disconnected, first remove the key from the vehicle and wait for 5 minutes to allow the vehicle to enter sleep mode before proceeding. If replacing the battery without disconnecting the power, be careful not to let the positive terminal come into contact with the vehicle body during the process, as this may cause module fault lights to appear.

14

2

Share

Is Vehicle Registration Certificate Required for Annual Inspection?

Vehicle annual inspection and review do not require the vehicle registration certificate. Documents to be submitted include the vehicle license, compulsory traffic accident liability insurance certificate, etc. The regulations on motor vehicle registration and precautions before applying for annual inspection are as follows: Motor Vehicle Registration Regulations: According to Article 49 of the 'Motor Vehicle Registration Regulations', the owner of a motor vehicle may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. Precautions Before Applying for Annual Inspection: Before applying, the owner of the motor vehicle shall complete the handling of any road traffic violations and accidents related to the vehicle. When applying, the owner shall fill out an application form and submit the vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or tax exemption certificate, and motor vehicle safety technical inspection compliance certificate. The vehicle management office shall, within one day from the date of acceptance, confirm the motor vehicle, review the submitted certificates and documents, and issue the inspection compliance mark.

17

4

Share

How to Open the Trunk of the Buick Verano?

How many points are deducted if the handbrake is not fully released during the uphill start in Subject 2?

How to Adjust the Seat for Subject 2?

What is the load capacity of the Nissan Sylphy trunk?

What is the method to prevent stalling during uphill start in Subject 3?

Where is the battery located in the Mercedes-Benz R300?

Is Vehicle Registration Certificate Required for Annual Inspection?

What kind of audio system is used in the Mercedes-Benz C-Class?

How Long Does It Take to Learn to Drive a Car?

Which has more space, the BMW 325li or the Accord?

What are the symptoms of a worn car pressure plate?