How to Open the Trunk of the Buick Excelle?

2 Answers
DiAriana
08/31/25 8:21am
The method to open the trunk of the Buick Excelle is to press the button on the driver's side door trim panel. Taking the 2021 automatic light hybrid entry-level Excelle as an example, its body dimensions are: length 4609mm, width 1798mm, height 1486mm, with a wheelbase of 2640mm, a fuel tank capacity of 44 liters, and a curb weight of 1285kg. The 2021 automatic light hybrid entry-level Excelle features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163PS, a maximum power of 120kW, and a maximum torque of 230Nm, paired with a 6-speed automatic transmission.
Was this review help?
18
0
Share
DelAlessandra
09/13/25 4:32am
I drive my Excelle to work every day, and the trunk opens very conveniently. The most commonly used feature is the small button on the remote key—just press it, and the trunk automatically pops open, which is especially handy when carrying items without needing to bend down. Even when the car is locked, it can sense the key approaching and automatically unlocks as long as you're within two or three steps behind the car. Inside the car, there’s a dedicated control button, usually located on the driver’s door panel or near the center console—just press it lightly, and the trunk opens without the driver needing to exit the vehicle. If the key battery dies, don’t panic—there’s a small physical key inside the key fob. Insert it into the lock cylinder in the center of the trunk lid and turn it to open manually. I recommend developing a habit of regularly checking the trunk switch and latch for cleanliness to avoid dust buildup that could cause sticking, ensuring a smoother and more efficient driving experience.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What to Do When the Car Displays 'No Key Detected'?

Here are the solutions for when the car displays 'No Key Detected': 1. Remote control battery is dead. First, check if the remote can unlock the car doors. If not, replace the battery directly. If it works, it might be due to low battery power, causing a weak signal that the car's computer cannot read—replacing the battery should fix this. 2. The remote control itself is faulty and cannot emit a signal. Check if the battery inside the car's remote key has sufficient power. 3. Place the remote key in the emergency start position in the middle cup holder to start the car. (Remove the cup holder pad to find a spot that fits the key perfectly.) 4. Check if there are any interfering objects inside the car, such as razors or magnets. Try starting the car by placing the key in the emergency start position at night. If it starts, the remote may need to be reprogrammed.
8
3
Share

What is the flashing light when a motor vehicle malfunctions?

When a motor vehicle malfunctions, the corresponding warning light will flash to indicate the issue. However, a warning light does not necessarily mean the vehicle cannot be driven. Some lights serve as warnings only, and some may indicate false alarms. Common warning lights include: Engine and Transmission: Engine malfunction indicator light. Airbag System: Airbag warning light. Braking System: Brake system warning light. Warning lights can generally be categorized into three types based on the cause of activation: False Alarm: The warning light is illuminated, but there is no actual malfunction in the vehicle. Intermittent Fault: The warning light flickers on and off, indicating an occasional issue. Examples include loose sensor wiring, poor connector contact, or intermittent signal transmission. Genuine Fault: The warning light requires immediate attention, such as the oil pressure warning light, coolant temperature indicator, brake system warning light, or battery warning light.
20
0
Share

How to Install the Foot Pedals on Baojun 730?

The method to install the foot pedals on Baojun 730 is as follows: 1. Open the car door and clean the installation area along the lower edge of the door frame; 2. Take out the foot pedals and distinguish the front, rear, left, and right sides based on their length and curvature; 3. Peel off the protective layer of the double-sided tape on the back of the pedals, align them with the installation area, and press firmly. The Baojun 730 is a 5-door, 7-seater MPV with body dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 108 kW and a maximum torque of 250 Nm. The drive system is front-wheel drive, with a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear.
11
2
Share

What Causes the Rattling Noise in Corolla's Dashboard?

Internal wiring harness connectors may have come loose, or small components may be loose. Poorly arranged internal wiring can cause friction between wires due to vehicle vibration during driving, resulting in abnormal noises. Causes of the rattling noise: The rattling noise in the Toyota Corolla's dashboard may originate from the following areas: deviations in the plastic molds of the center console or installation misalignment. Bumps can cause friction and squeezing between components, leading to loosening and noise. Locate the source of the noise to identify the friction point. Placing rubber padding at the friction point can provide effective cushioning. Solutions: It's best to disassemble the dashboard to inspect the issue. Removing the center console is relatively simple—just proceed with patience. For aesthetic purposes, the center console often has one or a ring of imitation metal or walnut trim strips, which are secured with clips. You can use a flathead screwdriver to carefully pry along the seams, gently lifting the trim strip section by section.
2
2
Share

Why doesn't the cabin light turn on when opening the car door?

The reasons why the cabin light does not turn on when opening the car door are: 1. The door control switch is aged or damaged; 2. The light switch is aged or damaged; 3. There is an open circuit in the wiring; 4. The switch inside the light assembly is damaged or aged. The solutions for a non-functioning cabin light are: 1. Replace the bulb; 2. Replace the fuse; 3. Turn on the switch. The types and functions of car lights include: 1. Daytime running lights: To attract attention from other road users; 2. Fog lights: Strong penetration in fog, making it easier for vehicles and pedestrians to notice early; 3. Low beam headlights: To see the road conditions in front of the vehicle; 4. High beam headlights: To view distant road conditions; 5. License plate lights: To illuminate the vehicle's license plate at night; 6. Turn signals: To alert vehicles and pedestrians in front, behind, and on the sides; 7. Brake lights: To warn people or vehicles behind.
20
4
Share

What Causes the Electric Current Sound in the Front Brake of the Benelli Leoncino 500?

The causes of the electric current sound in the front brake of the Benelli Leoncino 500 are as follows: Metal Hard Points on the Brake Pads: If there are tiny metal particles on the brake pads, they will produce a sharp noise when the brakes are applied. You can try slamming the brakes a few times or sanding and replacing the brake pads. Severe Wear on the Brake Disc: After prolonged use, the brake disc will develop deep grooves where the brake pads make contact, leading to abnormal noises or vibrations when braking. If the grooves are not deep, sanding the edges of the brake pads may solve the issue. However, if the grooves are deep, the brake disc will need to be replaced. Small Stones or Water Film Between the Brake Disc and Brake Pads: If you have driven on gravel roads, encountered windy and sandy weather, or just washed the bike, check for and remove any small stones. Alternatively, pressing the brakes a few times can help wear off the water film.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.