How to Open the Trunk of Honda Elysion?

2 Answers
DiTyler
07/28/25 11:50pm
Honda Elysion trunk opening method: There is no trunk switch inside the car, you need to walk to the trunk and lift it manually. The trunk volume of Elysion varies according to the arrangement of the rear seats, and the space is very spacious. Honda Elysion is a mid-to-high-end MPV launched by Dongfeng Honda. In terms of body size, the Honda Elysion has a length, width, and height of 4935mm, 1845mm, and 1805mm respectively. The dashboard of Dongfeng Honda Elysion adopts a layered design, which looks very technological. The car can provide two interior colors, dark and light, paired with wooden decorations, reflecting a luxurious style.
Was this review help?
18
3
Share
DiClaire
08/12/25 4:09am
I remember when I was a Honda Elysion owner, there were multiple ways to open the trunk, which was quite convenient. The key fob had a dedicated trunk button—holding it down for a second or two would automatically open it. If the key wasn't handy, there was a round button on the driver's side near the seat; just press it to open. The trunk lid itself also had a small button—a simple touch would release it, perfect when your hands were full after shopping. Some newer models even support a foot-sensing feature—just wave your foot under the rear bumper, and the trunk slides open. In case of system failure or a dead battery, there's a hidden small hole on the inner side of the trunk where you can manually pry it open with the key. It's recommended to regularly clean the buttons and sensor areas to prevent dust from causing malfunctions, and be mindful not to let children press them randomly to avoid accidents. Overall, the design is very user-friendly, balancing daily practicality and safety.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

Does Stalling During Reverse Parking Count as Failing?

Stalling during reverse parking counts as failing the test and results in a zero score. Below are some details about stalling during the second subject test: 1. Deduction Rules: Stalling outside the designated test area does not count as failing. However, stalling once due to improper operation during the second subject test deducts ten points. Stalling during a test item (such as curve driving) that causes the vehicle to stop counts as failing. 2. Deduction Scenarios: Stalling during test items like reverse parking, parallel parking, or right-angle turns can lead to an intermediate stop, where the speed drops to zero. Any pause exceeding two seconds deducts five points. If stalling during curve driving causes an intermediate stop, the test is immediately marked as a fail.
18
2
Share

What are the origins of the three major components of the JMC Yusheng S350?

JMC Yusheng S350's engine comes from Ford, the transmission is from ZF, and the chassis is from British Lotus. The JMC Yusheng S350 is a highly popular model in the domestic SUV market. The two main concerns for SUV consumers are high fuel consumption and high prices. The Yusheng S350, manufactured by JMC Motors, completely eliminates these unnecessary worries for consumers. Its economical and comfortable driving experience makes the Yusheng S350 a focal point of attention. Below are details about the three major components of the JMC Yusheng S350: 1. Engine: The 'heart' of the Yusheng S350 is derived from Ford's flagship drive, renowned as 'Europe's most fuel-efficient diesel engine.' This 2.4T high-pressure common rail engine features Bosch's second-generation high-pressure common rail direct injection system, delivering a maximum output of 90KW at 3800 RPM and a peak torque of 290N·M at 1600 RPM. 2. Chassis: In simple terms, this vehicle uses a pickup truck chassis. It features a common body-on-frame design with a front double-wishbone independent suspension, which enhances driving stability through its large suspension structure. Equipped with BorgWarner's four-wheel-drive system, it automatically collects real-time vehicle data and switches between two-wheel and four-wheel drive without driver intervention, improving dynamic performance and stability in rain or snow. 3. Transmission: The Yusheng S350 uses ZF's 8-speed automatic transmission. It not only features a maintenance-free transmission oil design and D/M shift strategies but also adds two more gears compared to the older 6AT model. The closely spaced gear ratios ensure smoother shifting logic and address the issue of insufficient acceleration performance at high RPMs in diesel vehicles. It achieves an average 0-100 km/h acceleration time of 10.5 seconds while also improving fuel efficiency.
13
4
Share

How Often Should a Family Car Have Its Water Refilled?

For small family cars, the water in the radiator should generally be replaced every two years or every 30,000-40,000 kilometers driven. Vehicles with higher usage frequency may require earlier replacement based on condition. Here is more information about the car radiator: 1. Introduction: The car radiator, also known as a heat exchanger, is a key component of the car's cooling system and part of the car engine. 2. Function: Its role is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to circulate, achieving temperature regulation. 3. Working Principle: When the engine's water temperature is high, the water pump circulates the water repeatedly to lower the engine's temperature, thereby protecting the engine. In winter, if the water temperature is too low, the water circulation stops to prevent the engine from becoming too cold.
9
2
Share

Within what distance of 50 meters is motor vehicle parking prohibited?

Motor vehicles are prohibited from parking at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations. When temporarily parking on the road, motor vehicles must comply with the following regulations: 1. Parking is prohibited in sections with no-parking signs or markings, in sections with separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as at crosswalks and construction zones; 2. Parking is prohibited at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations; 3. Parking is prohibited in front of bus stops, emergency stations, gas stations, fire hydrants or fire stations (including within 30 meters of these locations), except when using these facilities; 4. Doors must not be opened and passengers must not board or alight before the vehicle comes to a complete stop, and opening or closing doors must not obstruct the passage of other vehicles or pedestrians; 5. When parking on the roadside, vehicles must be parked close to the right side of the road, and the driver must not leave the vehicle. After passengers board or alight or goods are loaded or unloaded, the vehicle must depart immediately; 6. City buses must not stop to pick up or drop off passengers outside of designated bus stops.
9
2
Share

How to Deal with Nervousness During Subject 2 Driving Test?

Here are some solutions to nervousness before taking the driving test: 1. Identify and fill the gaps, summarize during practice: Strengthen the practice of weak areas before the test and conduct targeted exercises. Have the coach correct the common situations you encounter, learn with questions in mind, and consolidate the day before the test for better results. 2. Don’t focus too much on the test results: The test is to determine whether the student has the ability to drive. Having skills is not enough; one must also be adaptable and able to handle pressure. Identifying shortcomings through the test is beneficial for future driving. 3. Adjust the test mindset: Take every practice seriously, treat regular training as the test, and the test as regular training. In the test, be confident in yourself and your usual training. Think about how hard you’ve worked and how well you’ve practiced—efforts will pay off. Just perform normally during the test without unnecessary worries. 4. Positive psychological hints: While waiting in the lounge, you can talk with fellow candidates but avoid discussing the test, as it may increase nervousness. Give yourself positive psychological hints like "I can do it." 5. Ensure adequate sleep before the test: Only with full energy can you be more confident during the test. Therefore, rest early the night before the test, avoid using your phone before sleep, and ensure sufficient sleep to stay more focused during the test the next day.
20
3
Share

What is the default Bluetooth password for cars?

The default PIN code for car Bluetooth is usually 0000, 1234, or 1111. When a car owner picks up a new car, the staff at the 4S store typically informs them of the vehicle-specific PIN code. If the owner forgets their car's Bluetooth PIN code, they can inquire at the 4S store, as they usually keep a record of it. More details are as follows: 1. Purpose of the PIN code: The car Bluetooth PIN code is required for clearing fault codes, matching performance after replacing important components, and pairing car keys. It serves as the vehicle's production identification code, ensuring security. 2. Connection method: Turn on both the phone's Bluetooth and the car's Bluetooth, search for the car's Bluetooth signal on the phone, and click to connect. Enter the password in the car Bluetooth dialog box to complete the connection.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.