How to Open the Trunk of Baojun 730?

How to Deal with Scratches Inside the Car?

Here are the methods to deal with scratches inside the car: 1. Apply toothpaste: Apply toothpaste to the scratched area and wipe it back and forth. This can effectively remove the scratches and also prevent rust. 2. Waxing: Minor scratches can be removed with regular maintenance wax, while deeper scratches require rubbing compound. 3. Use a touch-up pen: A touch-up pen can be used to color the scratches. For deeper scratches, apply a base coat first before touch-up painting. The steps include waxing, sanding, cleaning, and waxing again. Avoid using too much wax; just enough to cover the damaged area is sufficient. 4. Use an eraser: For very shallow marks, an eraser can be used to wipe them off.

14

2

Share

Is it necessary to repair bumper scratches?

Whether to repair bumper scratches depends on the car owner's preference. If the scratches affect the appearance of the vehicle, they can be repaired. If they don't bother the owner, they can be left as is. Methods for repairing car bumper scratches: For minor scratches: If the scratches are more severe and reveal the underlying primer, the decision to repair depends on the location of the damage. Generally, bumpers, side mirrors, and some wheel arches are made of engineering plastic, which doesn't rust, so whether to repair them is up to the owner. Additionally, applying toothpaste gently to shallow scratches and rubbing with a soft cloth in a counterclockwise motion can reduce the appearance of scratches and protect the paint from further damage. For scratches that expose the primer: Touch-up pens are available at most auto parts stores. The owner needs to provide the car model and official color name to get the right color match. Before use, shake the touch-up pen well and carefully apply the paint along the scratch. Once dry, apply fine wax to the area. For dented scratches: If the front bumper has dents without chipped or peeling paint, it's best to take the car to a 4S shop for repair. A dent repair typically takes about 20–40 minutes. Most 4S shops have specialized tools for dent repair, such as suction handles, electric heaters, and small pry bars. After the dent is fixed, the scratches can be treated as needed.

8

4

Share

How to Stop a Continuously Ringing Car Alarm?

To stop a continuously ringing car alarm, you need to reduce the sensitivity of the anti-theft device to a level where kicking the tire won't trigger the alarm. The anti-theft control box is usually installed under the dashboard. After opening it, you can see a spiral knob that can be rotated to adjust the sensitivity. Here's some relevant information about car alarms: 1. Function: Car alarms are multifunctional products. In addition to theft prevention, they can also remotely control trunk opening/closing, door locking/unlocking, window operation, engine starting, and engine locking. 2. Features: In case of robbery or carjacking, if the owner cannot escape, pressing a hidden button will immediately dial preset emergency numbers. The receiving party can remotely stop the vehicle, listen in, or make announcements. If the owner manages to escape, they can use any phone to remotely control the vehicle (stopping, listening, announcements) by entering the system with a password.

10

4

Share

What are the differences between China 5 and China 6 vehicle emission standards?

Here are the main differences between China 5 and China 6 vehicle emission standards: 1. Price difference: China 6 vehicles require additional equipment compared to China 5, and automakers face extra costs from various tests for vehicle certification and production. This makes China 6 vehicles significantly more expensive than China 5 vehicles. 2. Road access and entry restrictions: Many local policies impose traffic bans on vehicles with lower emission standards, and some older vehicles may be completely prohibited from road use, resulting in restricted access or limited driving areas. 3. Residual value difference: Due to factors like scrapping timelines, road access restrictions, and entry limitations in certain areas, vehicles with the same condition but different emission standards can have substantial differences in residual value. Additionally, vehicles with excessively low emission standards are harder to sell.

9

0

Share

How to Operate a Car Atomizing Disinfector?

The specific method for using a car atomizing disinfector is as follows: first, place the atomizing disinfector in the central position inside the car that needs to be disinfected, or in another location conducive to ozone diffusion. Then, set the disinfection time, turn on the car's internal circulation, and switch on the power supply to set the microcomputer controller to automatic mode. Open all doors and ventilate for a few minutes. Below is an introduction to the car atomizing disinfector: 1. Principle: The device atomizes the antibacterial agent into ultra-fine particles of hundreds of millions of nanometers in size. These ultra-micro nano antibacterial particles can more effectively kill bacteria and molds in the air and on surfaces, leaving them nowhere to hide. 2. Function: When the fan or air conditioning is operating simultaneously, placing the atomizing disinfector near these facilities helps in better diffusion of ozone, achieving a more effective disinfection result.

6

2

Share

How Many Chances Are Left for the Driving Test Subject 3?

There are 5 test opportunities for the driving license Subject 3. Subject 3, also known as the road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safe civilized driving knowledge test in the motor vehicle driver's examination. Relevant information: 1. The content of Subject 3 generally includes: vehicle preparation, light simulation test, starting, straight-line driving, gear shifting operation, lane changing, pulling over, passing through intersections straight, left turns at intersections, right turns at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, turning around, and night driving. 2. Notes for the Subject 3 test: (1) If the candidate's fingerprint verification fails, please exit the vehicle to re-collect the fingerprint before queuing again for the test. (2) During the test, if the candidate's score is below the passing score, the system will automatically prompt the candidate to pull over. After completing the pulling over action, the system will prompt for the next test. (3) After the candidate completes all required test items as required and drives a distance of more than 3 kilometers, the system will automatically prompt to pull over. After hearing the voice prompt to pull over, the candidate should choose a clear curb (or solid road edge line) on the test route and complete the pulling over action after confirming safety. After pulling over, the system will announce the test results via voice. (4) When walking around the vehicle to observe the vehicle's appearance and surrounding environment, to ensure the accuracy of radar signal detection, please keep the distance between the person and the vehicle within 1 meter.

11

2

Share

How to Open the Trunk of Baojun 730?

How to Deal with Scratches Inside the Car?

Is it necessary to repair bumper scratches?

How to Stop a Continuously Ringing Car Alarm?

What are the differences between China 5 and China 6 vehicle emission standards?

How to Operate a Car Atomizing Disinfector?

How Many Chances Are Left for the Driving Test Subject 3?

Where is the Geely Emgrand produced?

What is the difference between service brake and parking brake?

Where is the air conditioning filter located in the new Peugeot 308?

How to Resolve BYD ESP System Malfunction?