How to Open the Trunk of an Older Volkswagen Bora?

2 Answers
WilliamDella
08/31/25 8:17am
The Volkswagen Bora trunk can be opened in the following ways: 1. Press and hold the trunk button on the remote key to open it. 2. There is a switch on the driver's door that can also be used to open the trunk. The functions of the car trunk include: 1. A fully equipped tool kit: The trunk contains a spare tire, jack, headlight tools, warning triangle, first aid kit, etc. Generally, these are standard equipment in cars, but many models may not have them all. 2. Luggage storage net: While driving, you might encounter the problem of small, fragile items being hard to place. Even if arranged neatly, they may get disorganized or damaged by bumps. With a luggage storage net in the trunk, these concerns are eliminated.
Was this review help?
17
0
Share
Annie
09/13/25 4:29am
When driving my old Volkswagen Bora, I'm used to operating the trunk directly with the remote key fob button—just a gentle press easily pops it open. If the remote isn't available or the battery dies, locate the mechanical keyhole near the rear emblem, insert the physical key, and give it a twist to unlock. Inside the car, there's also a convenient feature: a lever beside the driver’s seat or on the door panel—pull it to automatically release the trunk. However, keep in mind that older car locks are prone to rust or jamming. If it won’t open, try wiggling the key or checking the key battery’s lifespan. Regularly applying lubricant to the keyhole prevents rust and ensures smooth trunk operation.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

What to Do When the Car Cigarette Lighter Won't Pop Out?

Solutions for a car cigarette lighter that won't pop out: You can try pulling it out by hand, but avoid using excessive force. Gently rotate it while pulling vertically upwards. If the lighter is glowing red and functioning normally, it indicates that the spring clip in the socket is damaged. If it's not glowing red and simply won't pop out, it might be due to a blown fuse, causing the lighter to lose power and preventing it from ejecting properly. The cigarette lighter operates at 12 volts, matching the vehicle's battery voltage. Typically, the lighter has a dedicated power line connected to it, separate from other circuits, and thus has its own fuse. The correct usage method involves inserting and removing the lighter vertically without shaking it, as frequent wiggling during removal can lead to loosening, short circuits, and damage to the fuse or external devices.
10
3
Share

How to start the Roewe RX5?

Use the key to enter the vehicle, allowing the vehicle to detect the key. This enables the car to start normally. Press the brake pedal and press the one-touch start button located in the center of the vehicle to start the engine. Check the vehicle's dashboard to ensure there are no fault warnings, confirming that the vehicle is operating normally. Any faults detected could affect the car's movement. Press the electronic parking brake button to release it, then shift gears to begin driving. The vehicle will now start and move normally.
5
1
Share

How to start a Kia car when the key fob battery is dead?

Place the key near the push-button start for a while. Touch the button with the key. The Kia K3 is a compact car under Dongfeng Yueda Kia, and the 2021 Kia K3 is equipped with a 1.4L turbocharged engine.
13
3
Share

How to Remove the Rear Seats of a Kia?

On both sides of the rear seat headrests, near the windows, there are handles. Pull these handles. The backrest of the rear seat can be folded forward. For the cushion part of the rear seat, in most cases, you simply push the cushion towards the rear of the car and then lift it upwards to remove it.
12
4
Share

How to fold down the rear seats of a Kia Forte?

Purchase a 12mm T-socket wrench. Locate the fixing screws in the gap between the seat and the backrest, and the screws between the backrest and the door frame, then remove them. Feel for a latch under the seat, hold the latch and lift the seat directly upwards to remove it. Lift the backrest slightly (the back of the backrest is hooked on), then remove it after disengaging.
10
3
Share

How to align the camshaft small chain of Kia Sportage 2.0?

Use the timing disc to secure the timing wheel. Loosen the screw of the timing wheel shaft with a wrench. Find the colored timing chain tooth on the camshaft. Rotate the chain on the camshaft to align the tooth with the small dot on the wheel, ensuring correct timing alignment. Release the disc on the timing wheel shaft to complete the timing alignment.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.