How to Open the Trunk of an Accord Sedan?

1 Answers
StDaniel
07/29/25 6:22pm
The trunk control button is located under the left door of the Accord's cabin. Press it to open the trunk. Below are the specific details about the Accord: 1. The Honda Accord is a mid-size sedan under GAC Honda, available in both gasoline and hybrid versions. It measures 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. 2. The Accord emphasizes safety performance, featuring a standard VSA system and front seat side airbags. 3. The Accord is equipped with world-leading i-VTEC and VTEC engines. The i-VTEC engine combines Honda's VTEC (Variable Valve Timing and Lift Electronic Control) technology with VTC (Variable Timing Control) technology, which continuously adjusts the valve timing across different engine speeds. This results in strong torque output and sharp acceleration performance. The ECU (Electronic Control Unit) manages the opening and closing of intake and exhaust valves, optimizing the engine's combustion state to achieve an ideal balance of high power output, low fuel consumption, and clean emissions.
Was this review help?
1
3
Share
More Forum Discussions

Will the 13-Year Mandatory Scrapping Policy for Motorcycles Be Abolished?

As of now, there have been no changes to the regulations regarding motorcycle scrapping. Below is relevant information about motorcycles: Motorcycle Service Life: According to regulations, the service life of a three-wheeled motorcycle is 12 years, while other motorcycles have a mandatory scrapping period of 13 years. The relevant authorities have established these service life regulations based on local conditions, with the former not less than 10 years and the latter not less than 11 years. This means the scrapping period for three-wheeled motorcycles ranges from 10 to 12 years, and for other motorcycles, it ranges from 11 to 13 years. Motorcycle Annual Inspection Notes: According to traffic laws, motorcycles are exempt from on-site inspections for the first 6 years, followed by annual inspections thereafter, with mandatory scrapping at 13 years. If a motorcycle fails to undergo inspection for three consecutive cycles, it must be mandatorily scrapped.
4
0
Share

How to Adjust the Sensitivity of an Electronic Throttle Pedal?

The sensitivity of the throttle can be adjusted by modifying the throttle cable. Below is more relevant information: 1. Throttle Pedal: A throttle pedal is a vehicle accessory that allows the driver to control the pedal more freely, enhancing driving safety. Most throttle pedals are designed with aluminum alloy, and adding a throttle pedal can significantly increase the vertical contact area of the pedal. 2. General Principles of Throttle Control: Except in emergencies, drivers should remember these eight words in most situations: 'Press lightly, lift slowly, smoothly and evenly.' Stomping on the throttle not only causes the vehicle to jerk suddenly but also wastes fuel, making passengers inside the car feel uncomfortable with sudden movements. When pressing the throttle, the right heel should rest on the floor of the driver's compartment as a pivot point, with the foot lightly pressing on the accelerator pedal. The ankle joint's flexion and extension should be used to press or release the pedal, applying force gently to achieve a light press and slow lift.
11
4
Share

Is it normal to feel a bit dizzy when looking at the newly applied car film?

It is not normal to feel a bit dizzy when looking at the newly applied car film. This may be due to uncleaned glass during the film application or quality issues with the film itself, resulting in low clarity of the film. Below are precautions to take after applying car film: 1. Do not roll the windows up or down: After applying the car film, the film has not fully adhered to the car glass. Avoid rolling the windows up or down within three days. 2. Do not wash the car: Avoid washing the car within three days and do not wipe the film with hard objects. 3. Water bubble phenomenon: On the second day after applying the film, water mist and bubbles usually appear, which is a normal phenomenon. The moisture will evaporate after exposure to sunlight. 4. Applying film in winter: If the film is applied in winter, do not roll the windows up or down or wash the car within a week. Moisture evaporates more slowly in winter, and the front and rear windows may take a month to completely dry. The rear window heating wires should not be turned on within a month.
6
2
Share

Is the failure rate of the Sylphy's transmission very high?

Older models of the Sylphy indeed had more transmission issues, with frequent occurrences of acceleration jerking and transmission solenoid valve problems. Below is an introduction to relevant knowledge about the Sylphy: Powertrain: In terms of powertrain, it is equipped with a 1.6L naturally aspirated engine that meets the National VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is paired with a CVT gearbox. Features: The new car is equipped with the latest NissanConnect super-smart connectivity system, featuring an external 8-inch HD capacitive touchscreen that includes functions such as voice control for the vehicle and remote vehicle control. Voice control allows basic operation of the vehicle's online entertainment system, all-time online navigation system, Bluetooth phone, driving recorder, and air conditioning through simple dialogue. The remote monitoring and control function enables an unobstructed connection between the smart APP and the user's phone, keeping the user fully informed about the vehicle's condition at all times and allowing remote control of door locks, flashing lights, horn, engine, and air conditioning based on specific needs.
15
3
Share

What Do Electronic Police Mainly Capture?

Electronic police capture violations such as illegal U-turns, improper lane changes, occupying bus-only lanes, driving in the wrong direction, running red or yellow lights, and changing lanes over solid lines. Below are detailed descriptions of other monitoring methods for detecting violations: 1. Traffic flow monitoring: Installed on thin poles. Used to record traffic volume on road sections at different times of the day, submitting data to the traffic management bureau to adjust traffic light intervals, not for recording vehicle violations. 2. Speed trap cameras: Installed in indicated locations, relatively easy to spot, but may also be placed in concealed areas on highways, making them hard to identify. If such a camera flashes as you pass by on the highway, it indicates you are speeding. 3. Illegal parking cameras: Commonly seen in small neighborhood roads and high-traffic areas. They can also monitor wrong-way driving and prolonged illegal parking, with an accuracy rate of over 90%. The lens can zoom and automatically adjust the image size, with a visible range of 200 meters. 4. Multiple cameras on a single pole: Typically installed between intersections, most commonly used on main roads with a speed limit of 60 km/h. Some are hidden under bridges.
2
3
Share

How to Repair Minor Scratches on the Car Body?

Minor scratches, also known as "swirl marks," can often be fixed with a simple trick: applying toothpaste to the affected area and gently rubbing it in. Toothpaste contains fine particles that act as a mild abrasive, gradually polishing away the scratches. This method works best for superficial scratches that haven't penetrated the deeper layers of the paint. For more noticeable scratches that haven't damaged the paint, a touch-up pen can be used. Touch-up pens are designed for small blemishes, but it's important to choose the right color, as some pens may not match the car's paint perfectly. While convenient, touch-up pens have drawbacks, such as limited durability and potential uneven application, which can affect the car's appearance. Nail polish can also be surprisingly effective! Since it's made from similar materials as car paint, it can help cover deeper scratches. If the scratch has reached the primer, it's a more serious issue, as the primer protects the underlying steel. Immediate action is needed to prevent rust. Use colored putty to fill the scratch, sand the area carefully without enlarging the damage, and ensure it's clean before applying the putty. Once the putty is applied evenly, finish with a compound and wax. If rust has already formed, sand the area with fine-grit sandpaper to remove the rust and smooth the surface before proceeding with the repair.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.