How to Open the Trunk of a Polo?

1 Answers
AnnaRose
07/30/25 5:07am
With the key, you can directly pull the trunk switch to open it. Here are the methods to open the trunk of a Polo: 1. Gently lift the trunk button to open it. 2. You can also unlock the trunk using the car key. Press and hold the trunk unlock button on the key for a few seconds, and the trunk will open automatically. 3. When the key is within the sensing range, you can directly pull the trunk handle to lift the trunk lid. 4. Some models have two buttons inside the trunk lid: one for closing the trunk and another that closes the trunk and automatically locks the car.
Was this review help?
6
3
Share
More Forum Discussions

How to Determine Whether Transmission Fluid Needs Replacement?

To determine whether transmission fluid needs replacement, a comprehensive assessment should be made based on the following aspects: Before evaluation, ensure the engine reaches operating temperature, then wait for it to cool below 50°C (requirements may vary by vehicle model). 1. Appearance and Odor: Normal ATF (Automatic Transmission Fluid) should appear clear and pure. If the fluid turns black, emits a noticeable burnt odor, or feels gritty with visible impurities when rubbed between fingers, replacement is needed. Note that due to the transmission filter, larger particulate impurities are typically trapped in the transmission pan, so obvious metal shavings or debris may not be felt, but some fibrous particles might be visible. 2. Transmission Temperature: If the transmission frequently triggers overheating warnings under similar driving conditions, this may indicate excessive impurities in aged fluid, impairing heat transfer. If engine coolant temperature remains normal, degraded anti-foaming properties of the transmission fluid could be the cause, warranting consideration for replacement. 3. Driving Performance: Excessive impurities can interfere with valve body operation, causing delayed or incomplete closure, affecting hydraulic pressure. This may manifest as jerking, surging, unusual noises, or increased operational sounds. These symptoms should be evaluated alongside the vehicle's mileage to conclusively determine if a fluid change is required.
16
0
Share

Why does the car shake after cleaning the throttle body?

Shaking after cleaning the throttle body is a normal phenomenon. Here is an introduction about the throttle body: 1. Most modern cars use electronic throttle bodies, which are very precise in control. Once the power is disconnected, they lose their matching values. Without these values, the electronic throttle body will initiate a self-learning process. However, the speed of this self-learning depends on the control logic and the type of control sensor used. 2. Most of the time, the learning process is slow, which is why the car may shake or even fail to start immediately after cleaning. Precautions: 1. After cleaning, ensure proper installation to avoid any folds in the sealing gasket that could cause air leaks. Reconnect the negative terminal of the battery. Match the vehicle's electrical components. 2. The throttle body cannot effectively determine the minimum airflow position, but it can determine the maximum opening position. In idle conditions, rapidly pressing the accelerator pedal a few times will help the throttle body gradually determine the optimal idle opening. The engine will slowly stabilize its RPM, and further precise learning will occur during subsequent driving.
6
5
Share

What does the RDM button in a car mean?

The RDM button in a car stands for random playback of multimedia music. Some car models have RPT next to RDM, which stands for repeat, meaning loop playback. Some function buttons of the car audio system: SEL/AF button, used to switch the audio band, for example, from AM band to AF band. PWR button, a short press can directly start the audio device, while holding the button for about 1 second can directly turn off the audio. VOL knob, used to adjust the volume of the audio according to personal preference. AMS button, when the audio is in radio mode, pressing this button for more than 2 seconds will automatically save the received radio station in preset stations 1-6. In MP3 mode, using this button allows you to select the MP3 menu. MUTE button, used for one-key mute of the audio. LOUD button, used to adjust the equal loudness of the audio, and reasonable use can enhance the music experience while driving.
12
2
Share

Where is the water temperature gauge on the Lavida?

The water temperature gauge of the Volkswagen Lavida is located on the multifunction display of the instrument panel. The Lavida's water temperature gauge displays the temperature digitally, with 90 degrees being the normal operating temperature for the engine. However, this may fluctuate depending on driving conditions, but it should ideally remain around 90 degrees. Below is an introduction to the new Lavida: 1. The front face of the new Lavida retains the multi-bar horizontal grille and integrated headlight design of the current model, featuring LED headlights. Instead of a closed grille, the horizontal bars are painted white. 2. The side profile maintains the same body lines as the current Lavida, with a sleek upper waistline running the length of the body. The fenders feature chrome trim, and the charging port is located above the right rear wheel arch. The wheels adopt a glossy multi-spoke design for a stylish look. The rear remains largely unchanged, with simple and straight lines. 3. The overall layout of the new Lavida is identical to the gasoline version, equipped with leather seats, a central multimedia screen, a multifunction steering wheel, automatic air conditioning, AutoHold, and other features. The spy shot model uses a mechanical instrument panel and a traditional mechanical start method.
18
1
Share

How big is the Levin trunk?

The Levin trunk has a capacity of approximately 379L, which can expand to 1026L when the rear seats are folded down. When using the Levin trunk, please note the following: 1. Heavier items in the luggage compartment should be placed against the seat back to ensure it is firmly secured. 2. If items can be stacked, place the heavier ones at the bottom. 3. Use the hooks on the side walls of the luggage compartment to hang bags. 4. Secure any loose items in the luggage compartment to prevent them from sliding. 5. When transporting items in the luggage compartment, do not tilt the rear seat back forward. 6. Do not allow loaded items to extend above the upper edge of the seat back. 7. Do not place any items on the trunk cover or dashboard, and do not obstruct the sensors on top of the dashboard. 8. Loaded items must not interfere with the operation of pedals, parking brakes, or gear shift levers, nor should they restrict the driver's freedom of movement. 9. Do not place any unsecured items in the car. 10. Do not drive with the trunk open.
17
5
Share

What are the precautions when buying a car from an auto trading store?

Precautions when buying a car from an auto trading store are as follows: 1. Check the nameplate: Verify the displacement, manufacturing date, chassis number, engine number, and other details on the nameplate. The numbers on the vehicle's certificate must match the engine number and chassis number on the car. 2. Body paint: Inspect the paintwork carefully, especially areas prone to scratches during transportation. The car's surface color should be consistent, uniform, full, smooth, and free of pinholes, pits, wrinkles, bubbles, streaks, or scratches. The borders of different colors should be clearly defined, and there should be no signs of repainting. 3. Window glass: Check for any damage or scratches on the glass, with particular attention to the visual clarity of the windshield. 4. Tires: Ensure the tires are in good condition without wear, cracks, or bubbles. Inspect the rims for cleanliness and perfection, with no dents or scratches. Also, inquire or measure the tire pressure—new cars often have higher tire pressure (typically recommended between 2.4 and 2.6). For disc brakes, check if the brake discs are in good condition, free of significant wear or dirt. 5. Chassis: Inspect for any leaks (coolant, lubricant, brake fluid, electrolyte, refrigerant, or oil lines). Also, check for oil leaks in various engine parts. Leaks can be identified by stains or residue on the ground where the car was parked or on the chassis pipes and protrusions. If possible, check underneath the car for any scratches on the chassis or obviously misaligned pipes. 6. Engine compartment: Compare the engine number and check if the compartment is clean, free of oil stains or rust. Listen for any unusual noises while the engine is idling. 7. Interior: Check the mileage and ensure the dashboard and navigation screen still have the original protective film. Inspect the seats for any damage or wear. Open the sunroof to check for unusual noises. 8. Vehicle documentation: Verify all necessary documents, including the purchase invoice, vehicle certificate, warranty service card, and user manual.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.