How to Open the Trunk of a Kia K2?

1 Answers
McSara
07/24/25 6:30pm
There are several methods to open the trunk of a Kia K2: 1. Use the trunk button on the remote key, press and hold the trunk unlock button to unlock the trunk; 2. There is a trunk unlock button located above the license plate light at the rear of the car, simply unlock the central locking system; 3. After opening, there are support rods on both sides of the trunk to prevent the lid from falling easily. The Kia K2 is a model under Dongfeng Yueda, with body dimensions of 4400mm in length, 1740mm in width, and 1460mm in height, and a wheelbase of 2600mm. In terms of power, the Kia K2 is equipped with two engines with displacements of 1.4L and 1.6L, with the 1.6L engine possibly using the same engine as the Forte, delivering a maximum power of 90.4kw and an increased maximum torque of 155nm.
Was this review help?
19
2
Share
More Forum Discussions

What documents are required for motorcycle inspection?

Motorcycle annual inspection requires the following documents: "Motor Vehicle License Plate Application Form"; Motor Vehicle Driving License; Motor Vehicle Traffic Accident Compulsory Insurance Certificate; Motor Vehicle Safety Technical Inspection Certificate issued by a motor vehicle safety technical inspection institution; Motor Vehicle Inspection Record Form; For motor vehicles subject to deferred inspection that are issuing the Motor Vehicle Safety Technical Inspection Qualification Mark for the first time this year, an "Application Form for Motor Vehicle Deferred Scrapping" must also be submitted. The process for motorcycle annual inspection is as follows: Bring ID card, driving license, and relevant materials to the vehicle management office; Collect forms at the vehicle management office lobby and fill them out; Pay road and bridge fees, compulsory traffic insurance if the insurance is expired (insurance within the validity period will not affect the annual inspection); Drive the motorcycle to the inspection hall to submit the driving license and annual inspection information card, and receive the "Entrusted Inspection Contract" to fill out. The annual inspection is then completed.
18
0
Share

What does BORGWARD 28t mean?

BORGWARD 28t represents a 2.0t engine. 28t is the manufacturer's designation for the powertrain, where 20 stands for a 1.5t engine and 28 represents a 2.0t engine. Introduction to Powertrain: Powertrain, also known as Powerplant in English, refers to a series of components in a vehicle that generate power and transmit it to the road surface. The broad definition of powertrain includes: Generally, it includes the engine, transmission, drive shaft, differential, clutch, etc. However, in most cases, the powertrain specifically refers to the engine, transmission, and other components integrated into the transmission, such as the clutch/front differential.
10
3
Share

What is the service life of a motorcycle before it is scrapped?

According to the new national regulations, the service life of a motorcycle is 10 years, which can be extended by 3 years. However, during the 3-year extension period, it must undergo a semi-annual inspection and can only be extended after passing the inspection. After 13 years, it must be mandatorily scrapped. Below is some relevant information about motorcycles: Introduction: A motorcycle is a two-wheeled or three-wheeled vehicle driven by a gasoline engine and steered by handlebars. It is lightweight, flexible, fast, and widely used for patrol, passenger and cargo transportation, as well as a sports equipment. Classification: Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc. Basic Components: A motorcycle consists of five parts: the engine, transmission system, running gear, steering and braking system, and electrical and instrument equipment.
12
1
Share

How to Quickly Remove Fog Inside the Car?

Here are specific methods to quickly remove fog inside the car: 1. Proper use of the air conditioning system: Park the car, start the air conditioning, turn the temperature adjustment button to the warm air direction, press the defrost button, and use the warm air from the air conditioning to dry the fog on the windshield. When defogging, you can switch the air conditioning to external circulation to allow fresh air from outside to enter the cabin. Setting the compressor and fan speed to 25°C or higher can speed up the defogging process. 2. Use specialized anti-fog products: Before each use, spray evenly on the windows and wipe clean to form a transparent protective film on the glass, preventing fog formation. One application can prevent fog for about ten days to half a month. 3. Cold and hot air convection: If the fog is not heavy, you can open a small gap in the side windows to allow air convection inside the car. As the temperature inside gradually matches the outside temperature, the fog will dissipate.
14
2
Share

What are the methods to deal with rust on a car body?

There are mainly three methods to deal with rust on a car body. Below are detailed introductions to these three methods: 1. Using acidic substances to remove rust: such as dilute hydrochloric acid, oxalic acid, or acetic acid from the kitchen at home. However, it is important not to use excessive amounts to avoid secondary corrosion. After removing the rust, proper maintenance should be noted. 2. Using cleaning agents to remove rust: Dip a soft cloth in bathroom cleaner or apply toothpaste and repeatedly wipe the rusty area. However, this method is only suitable for removing small amounts of rust; it is more troublesome for larger rust areas. 3. Using machine oil to remove rust: Simply choose a transparent, non-sticky machine oil and gently rub the rusty area. After removing the rust, use a soft, dry cloth to wipe off any residual oil on the car body. However, water should not be used to rinse it off.
13
0
Share

Does the Jetta VS5 dashboard have a water temperature gauge?

The top-end model of Jetta VS5 is equipped with a water temperature gauge on the dashboard. Automobile water temperature gauge: It indicates whether the engine's cooling system is functioning properly. It consists of a pointer, scale, and the letters C and H, where C represents 60 degrees and the red H section indicates 110 degrees. Function of the automobile water temperature gauge: It primarily displays the temperature of the coolant in the radiator while the engine is running, with the scale unit in Celsius. When starting the engine, the water temperature gauge should indicate no less than 50 degrees; during normal driving, the normal reading should be between 80 and 90 degrees. If the temperature becomes too high, the water temperature gauge will flash to alert the driver of excessive coolant temperature, preventing potential thermal fatigue damage to internal engine components due to prolonged high-temperature operation, which could compromise driver safety.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.