How to Open the Trunk of a Honda?

2 Answers
RubyLee
07/24/25 4:55am
Honda trunk opening methods vary depending on the model and include the following: 1. Press the button on the trunk directly to open it. 2. Some Honda models have a trunk lever or handle near the driver's left foot area; lifting the lever or pulling the handle will open the trunk. 3. Some models come with a trunk opening button on the remote key; pressing this button will open the trunk. 4. On some mid-to-high-end models, you can use a kick-sensing switch to open the trunk. 5. Unlock the central control: If the trunk and doors are interlocked, simply unlocking the central control will allow you to open the trunk from the rear.
Was this review help?
20
0
Share
StAddyson
08/11/25 12:33am
I've been driving a Honda for several years, and there are quite a few ways to open the trunk. The most common method is pressing the trunk button on the remote key fob; when sitting in the car, there's a small lever on the driver's door that pops the trunk open when pulled; some Honda models like the CR-V even have a handle on the trunk lid itself that opens it with a pull. Honda's smart key can also sense proximity to the car and automatically unlock and open the trunk. If it doesn't open, don't panic—it might just be a dead key fob battery needing replacement, or the switch could be jammed if the trunk is overloaded. In daily use, I prefer operating it in advance in parking lots to ensure safety, as detailed in the Honda manual. Remember, you need to unlock the car first before opening the trunk after locking—these little tricks have saved me a lot of hassle.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

What are the reasons for a vehicle's OBD test failure?

Reasons for a vehicle's OBD test failure: 1. The car's OBD system is too outdated and needs a system upgrade at a 4S shop; 2. There are faults in the car's system, which can be resolved by going to a 4S shop to troubleshoot, having the mechanic inspect and repair, then clearing the fault codes before retesting. OBD is the On-Board Diagnostics system, which monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If they do, it immediately issues a warning. When a system fault occurs, the malfunction indicator lamp or check engine warning light will illuminate, and the Powertrain Control Module (PCM) stores the fault information in memory. Through a specific procedure, the fault codes can be read from the PCM.
7
4
Share

How to Replace the Battery in an Old Magotan Car Key?

Steps to replace the battery in an old Magotan car key: 1. Locate the release button on the key, press it, and pull out the mechanical key; 2. Press the plastic clip and remove the battery holder; 3. Take out the old battery; 4. Install the new battery, ensuring the positive side faces upward; 5. After replacing the battery, reassemble the key in the reverse order of disassembly. The Magotan is a mid-size sedan under the Volkswagen brand, with body dimensions of 4866mm in length, 1832mm in width, and 1464mm in height. This model is equipped with three types of engines: a 1.4L turbocharged engine, a low-power 2.0L turbocharged engine, and a high-power 2.0L turbocharged engine.
20
1
Share

What does the auto start-stop function in cars mean?

The auto start-stop function in cars refers to a system that automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) and automatically restarts the engine when it's time to move forward again. The core of this system lies in its ability to automatically control engine shutdown and restart, thereby reducing unnecessary fuel consumption, lowering emissions, and improving fuel economy. The auto start-stop function is primarily designed for urban traffic situations, such as waiting at traffic signals or during traffic jams, to minimize engine idling time. Additionally, when the engine is shut off, the vehicle's electrical system can take over to power the engine cooling fan and the air conditioning system, replacing the traditional belt-driven mechanism.
17
5
Share

How to Check the Water Level in a Car Radiator?

Method for checking the water level in a car radiator: Open the engine compartment when the car is cold, locate the radiator for inspection. There are MAX and MIN indicator lines on the side of the coolant reservoir. When the car is cold, if the liquid level is below the MIN line, you can add coolant until it reaches the middle between the MAX and MIN lines. The car radiator is a key component in the cooling system, with the following functions: 1. Absorb heat from the engine block to prevent overheating; 2. Use water as a heat transfer medium in the cooling circuit to conduct heat, dissipating it through large cooling fins via convection to maintain the engine's optimal operating temperature. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core.
9
4
Share

Is the inspection at a 4S dealership free of charge?

Normally, inspections at a 4S dealership will incur labor fees. Below is a detailed introduction to the charges at 4S dealerships: 1. Labor fees: Automotive repair labor fees refer to the time and cost required for the repair work. As the name suggests, these fees are the labor service charges incurred due to the working time spent by the repair workers on inspecting and repairing the vehicle. Therefore, the main component of labor fees should be the cost of human labor. 2. Maintenance fees: During maintenance, only maintenance fees are charged, and incidental vehicle condition inspections are free of charge. For safety reasons, it is recommended to have inspections done at a 4S dealership. This is because the inspection items at a 4S dealership are more thorough, and accordingly, the inspection time is also longer.
18
3
Share

Can a Used China 5 Vehicle Be Licensed?

Whether in regions where the China 6 standard has already been implemented or in areas where it has not yet been enforced, used vehicles meeting the China 5 emission standards can be normally transferred and licensed. The import policies of various cities across the country have not changed, and the national policy trend is gradually lifting restrictions on used cars. Some cities have already lowered their import standards, so cross-regional transfer of China 5 used vehicles is also possible. Precautions for purchasing used cars: 1. When buying a used car, first walk around the vehicle to check if all four tires are properly inflated. 2. Observe whether the tire brands are consistent. 3. Inspect the front wheels. 4. Check the wheel bearings of the used car. 5. After the used car transaction is completed, require the buyer to promptly submit the relevant documents.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.