How to Open the Trunk of a BMW 3 Series?

How to Distinguish High, Mid, and Low Trim Vehicles?

Methods to distinguish high, mid, and low trim vehicles: 1. Check if the vehicle has xenon headlights or LED headlights. If it does, it's a high trim vehicle; otherwise, it's a low or mid trim vehicle. 2. Check if the wheels are large in size. If they are large and aesthetically pleasing, it's a high trim vehicle; otherwise, it's a low or mid trim vehicle. 3. Check the number of vehicle badges. More badges indicate a high trim vehicle; fewer indicate a low or mid trim vehicle. 4. Check if the vehicle seats are leather. Leather seats indicate a mid or high trim vehicle; otherwise, it's a low trim vehicle. 5. Check if the vehicle has a sunroof. A sunroof indicates a mid or high trim vehicle; otherwise, it's a low trim vehicle. 6. Check if the vehicle has features like automatic rain-sensing wipers, electrically heated seats, and automatically heated rearview mirrors. If it does, it's a high trim vehicle; otherwise, it's a low or mid trim vehicle.

7

3

Share

Should You Engage the Handbrake or Shift Gears First When Starting?

When starting the vehicle, you should first shift into gear and then release the handbrake. For automatic transmission vehicles, the starting procedure is as follows: press the foot brake, shift into D gear, release the handbrake, then release the foot brake, and finally press the accelerator to start. For manual transmission vehicles, the starting method is: use your right hand to shift into 1st gear, slowly lift the clutch pedal with your left foot to the biting point, gradually release the parking brake lever with your right hand, while gently pressing the accelerator pedal with your right foot to add throttle. After the car moves 3 to 4 meters, release the clutch pedal with your left foot, and use your right foot to increase speed to normal driving speed. Driving precautions: Avoid keeping the clutch in a semi-engaged state for extended periods. Some drivers habitually keep their left foot on the clutch while driving, believing it provides better control. However, this practice significantly damages the clutch disc, especially during high-speed driving, as prolonged semi-engagement can cause rapid wear of the clutch disc.

13

2

Share

What is the fuel tank capacity of the Boyue in liters?

Boyue fuel tank capacity is 58 liters, which is the officially announced data. The Boyue uses 92-octane gasoline, with a fuel consumption of 7.1 to 7.7L per 100 kilometers. A full tank can cover a distance of 753 to 817km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to ensure that the fuel inside the tank can expand when the temperature rises without overflowing. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the marked tank capacity.

12

5

Share

How to operate the automatic gear shift of the Bestune T77?

The Bestune T77 uses an electronic gear shift lever. The P (Park) gear is designed as a button placed above the function keys on both sides, with most function buttons integrated around the gear shift. P stands for Park, D for Drive, N for Neutral, R for Reverse, S for Sport mode, and M for Manual. More details are as follows: 1. P (Park) gear: This is the parking gear used when the vehicle is not driven for an extended period. Most gear shift levers have a "P" button at the top. When parking, pressing the "P" button at the top will display a green "P" on the gear shift lever, indicating the vehicle is in parking mode. 2. D (Drive) gear: This is the forward gear. Hold the lock button on the left side of the gear shift lever and pull it backward. A green "D" will appear on the gear shift lever, indicating the vehicle is in Drive mode. 3. N (Neutral) gear: This is the neutral gear, used for short stops without turning off the engine, such as waiting at a red light or in traffic. Push the gear lever forward until an "N" appears on the gear shift lever, indicating Neutral mode is engaged. 4. R (Reverse) gear: This is the reverse gear, used when the vehicle needs to move backward. Hold the lock button on the left side of the gear shift lever and push the lever forward until an "R" lights up, indicating Reverse mode is engaged. 5. S (Sport) gear: S stands for Sport mode, which makes the vehicle drive more dynamically. When the vehicle is in D mode, pushing the gear lever to the left will switch to M/S mode, with S mode as the default. 6. M (Manual) gear: This is the manual mode. When the vehicle is in D mode, pushing the gear lever to the left will switch to M/S mode, with S mode as the default. However, pushing the gear lever forward or backward will switch to M mode. Pushing forward decreases a gear, while pulling backward increases a gear, displaying m1, m2, m3, etc. The M mode can also be switched back to automatic mode by pushing the gear lever to the right at any time.

4

Share

Is It Over After E-Signing Upon Passing Subject One?

After passing Subject One and completing the electronic signature, you can leave. However, it's important to note that candidates who did not pass do not need to sign and can leave the examination room directly, awaiting notification from their driving school staff regarding the retake schedule. Subject One, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the test content includes the theoretical foundation of driving, road safety laws and regulations, local regulations, and other related knowledge. Examination Process: Follow the instructions of the staff to collect your driving training file in order at the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the examination area; No loud noises are allowed in the examination area; Regulation textbooks are not allowed in the examination room (or should be placed in your bag); After the examination, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the examination room; Candidates who pass the examination will leave the examination room after signing under the guidance of the staff at the exit; Candidates who fail the examination can leave the examination room immediately and await notification from their driving school staff regarding the retake schedule.

5

0

Share

Can I take the driving test if my practice is a mess?

Yes, you can. It's possible to pass the test even if your practice sessions are a mess—this is what we call 'extremes meet.' In fact, this scenario isn't impossible. Although your practice may not be satisfactory and the process may seem disorganized, you might still grasp the essential techniques, even if the execution isn't perfect. Subject 1: Road traffic safety laws, regulations, and related knowledge test (Subject 1)—theoretical, computer-based, with a full score of 100 points; 90 points or above (including 90) is considered a pass. Subject 2: Field driving skills test (Subject 2)—on-site, practical driving. Results are either pass or fail. The test includes five mandatory tasks performed in sequence: reversing into a garage, parallel parking, S-curve driving, right-angle turns, and hill starts and stops. The full score is 100 points; 80 points or above (including 80) is considered a pass. Subject 3: Road driving skills test (Subject 3)—on actual roads or simulated environments, practical driving. The full score is 100 points. Passing scores vary by vehicle type: 90 or above for large buses, 80 or above for large trucks, 90 or above for small cars and small automatic passenger vehicles, and 70 or above for other vehicle types. Subject 4: Safe and civilized driving knowledge (Subject 3 theory, commonly referred to as Subject 4, though officially there is no Subject 4 designation)—theoretical, with a full score of 100 points; 90 points or above (including 90) is considered a pass.

1

0

Share

How to Open the Trunk of a BMW 3 Series?

How to Distinguish High, Mid, and Low Trim Vehicles?

Should You Engage the Handbrake or Shift Gears First When Starting?

What is the fuel tank capacity of the Boyue in liters?

How to operate the automatic gear shift of the Bestune T77?

Is It Over After E-Signing Upon Passing Subject One?

Can I take the driving test if my practice is a mess?

How to Reset the Tire Pressure Monitoring Light on the Magotan?

How many kilometers does a car need to drive before replacing spark plugs?

What Transmission Does the Lynk & Co 01 Use?

Why Can a Mosquito Suspended in the Car Keep Up with the Vehicle's Speed?