How to Open the Trunk from Outside the Vehicle?

2 Answers
AnnaLynn
07/25/25 4:40am
Methods to open the trunk from outside the vehicle include: 1. Using the mechanical key by inserting it into the tailgate lock cylinder to open or close the tailgate; 2. Using the remote key to directly press the trunk opening button; 3. For some models without a dedicated trunk button on the remote key, pressing the unlock button will also release the trunk lock. To open the trunk from inside the vehicle, check for a trunk switch on the left side of the steering wheel or the central control area. Some vehicles may have a lever instead of a button, typically located on the lower left side of the driver's seat or steering wheel, marked with an icon of an open trunk. If the vehicle lacks both a button and a lever, unlocking the central lock will allow the trunk to be opened from the rear. There are various methods to open the trunk, with the location and method varying by model, so it's essential to refer to the specific vehicle's manual.
Was this review help?
11
3
Share
MariaAnn
08/10/25 5:28pm
I always carry my car key with me. When there's a button on the trunk, a light press opens it; if there's no button, pressing the trunk key on the key remote also works—quick and convenient. Remember to check the key battery regularly, so you don’t panic when it runs out. I also make it a habit to use the mechanical key as a backup—just insert it into the trunk’s keyhole and turn to open. Keep dust or water out of the trunk to prevent rust, which can make opening and closing unreliable. When moving items, cars with hands-free trunk opening are more effortless—just wave your foot underneath for automatic opening. Clean the button area weekly to avoid dirt buildup. If the trunk frequently fails to open, it might be a wiring issue—visit a 4S shop for inspection instead of forcing it. Develop good habits: check your surroundings for safety before opening the trunk to prevent accidents.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What Causes a Sudden Loss of Power in a Car Battery?

The reasons for a sudden loss of power in a car battery are: 1. The car has been parked for a long time, causing the battery to lose power; 2. The battery has reached the end of its service life; 3. Damage to the engine; 4. Insufficient battery electrolyte. A car battery, also known as a storage battery, works by converting chemical energy into electrical energy. Its types include: conventional batteries, dry-charge batteries, and maintenance-free batteries. Methods to restore a car battery after power loss are: 1. Use a charger to supplement the battery power with a low current and long-time charging method; 2. Find a rescue vehicle and connect the battery electrodes of both vehicles with charging cables, then start the rescue vehicle to charge; 3. Increase the voltage of the repair machine to above 10V for charging.
11
1
Share

What car is blsuauto?

blsuauto refers to Bisu Auto, and its models include: Bisu T5, Bisu M3, Bisu T3, Bisu T7, Bisu Tconcept, etc. Taking the 2017 Bisu T3 manual premium model as an example, it is a compact 5-door 5-seat SUV with body dimensions of: length 4350mm, width 1825mm, height 1685mm, and a wheelbase of 2565mm. The 2017 Bisu T3 manual premium model is equipped with a 1.3T turbocharged engine and a 5-speed manual transmission, with a maximum power of 98 kilowatts and a maximum torque of 185 Newton meters. Its drive type is front-wheel drive, the front suspension uses MacPherson independent suspension, and the rear suspension uses torsion beam non-independent suspension.
3
2
Share

Why are the tail lights of Ford Focus on?

Here are the reasons why the tail lights of Ford Focus are on: 1. Lack of brake fluid: Brake fluid is an indispensable part of the car's braking system. When the driver steps on the brake pedal, the force applied to the pedal is transmitted by the piston of the master brake cylinder through the brake fluid to the brake cylinders located at each wheel, causing the brake pads to contact the wheels and stop the vehicle. 2. Poor contact: It is necessary to check whether the brake switch has poor contact or is loose and not reset, whether there is poor contact or a short circuit in the brake circuit, whether the brake pedal rubber pad is punctured, whether the brake rubber ring is severely worn, or whether the brake switch is damaged. 3. Severe wear of brake pads: The light will also stay on, and the brake pads need to be replaced.
19
5
Share

Where Does the Car Air Conditioner Drain Water From?

Car air conditioner drain outlets are typically located at the bottom of the evaporator box, connected to the chassis via a hose. If the air conditioner drain outlet becomes blocked, water can seep into the passenger footwell through the connection, soaking items like floor mats. The function of the air conditioner drain outlet is to expel water condensed during the heat exchange process when the air conditioner is in use. The evaporator box continuously absorbs heat and condenses moisture from the surrounding air, which is then drained out. The condensation water from the car air conditioner is produced during the cooling process, and the condensation water pipe is located beneath the chassis. Other drain outlets on a car include: 1. Engine compartment drain hole; 2. Sunroof drain hole; 3. Fuel tank cap drain hole; 4. Door drain hole; 5. Trunk drain hole.
5
5
Share

What is the fuel grade for the BMW 3 Series?

The fuel grade for the BMW 3 Series is 95 octane. This grade of gasoline burns fully, is less prone to carbon deposits, and provides quick acceleration response. 95 octane gasoline consists of 95% isooctane and 3% n-heptane. High-compression engines should use high-octane gasoline; using low-octane gasoline in a high-compression engine can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. Taking the BMW 3 Series 320i as an example: in terms of body dimensions, its length, width, and height are 4719mm, 1827mm, and 1459mm respectively, with a wheelbase of 2851mm. In terms of power, the BMW 3 Series 320i is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 156 PS, a maximum power of 115 kW, and a maximum torque of 250 Nm.
7
5
Share

Can You Stop Directly in Fourth Gear with a Manual Transmission?

You can stop directly in fourth gear with a manual transmission by following these steps: 1. Press the brake pedal, slow down, then press the clutch while continuing to brake; 2. After stopping, shift to neutral, engage the handbrake, and release the clutch and brake to complete the stop. The correct method to start a manual transmission car is: 1. Fully depress the clutch with your left foot; 2. Shift the gear lever into first gear; 3. Turn on the left turn signal and honk the horn; 4. Release the handbrake and gently lift the clutch with your left foot; 5. Lightly press the accelerator with the ball of your right foot. Precautions for driving a manual transmission car include: 1. Shift gears frequently according to speed; 2. Avoid prolonged semi-clutch engagement; 3. Do not shift gears without fully disengaging the clutch; 4. Do not drive with the handbrake engaged; 5. Exercise caution when driving over bumps or potholes.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.