How to open the sunroof on the Volkswagen CC?

2 Answers
DelIker
09/04/25 8:37am
The sunroof on the Volkswagen CC cannot be fully opened; it can only be tilted slightly. The Volkswagen CC features a unique semi-panoramic sunroof designed to match the vehicle's styling. The front half of the roof consists of a large glass panel. Due to the CC's low-profile design, there is no space for a sunroof track in the roof, so the sunroof can only tilt open rather than slide. In terms of exterior design, the Volkswagen CC adopts Volkswagen's new design philosophy, featuring a refreshed grille with intersecting horizontal and vertical chrome accents that enhance its bold yet dynamic appearance. The grille extends upward on both sides, contributing to the car's sharp front-end styling. Under the hood, the Volkswagen CC is equipped with Volkswagen's advanced TSI turbocharged direct-injection engine and the renowned VR-series naturally aspirated engine. The sophisticated FSI direct fuel injection technology is paired with an efficient 6-speed DSG transmission.
Was this review help?
6
2
Share
EzraLynn
09/17/25 2:37am
Opening the sunroof on the Volkswagen CC is really simple. The button is located at the center front of the roof, easily reachable from the driver's seat. Gently press the rear half of the button, and the sunroof will tilt up slightly—this is the ventilation mode, perfect for quick air circulation during stop-and-go city driving. For a full panoramic open-air experience, press and hold the rear half of the button, and it will slide open gradually. To close the sunroof, simply push the button forward. After driving this car for a while, I've developed the habit of checking the weather before getting in—opening the sunroof on sunny days is incredibly enjoyable, but forgetting to close it in the rain can be disastrous. I recommend regularly cleaning dust from the sunroof seams to prevent clogging and leaks; a simple monthly wipe of the tracks can avoid trouble. Driving with friends in summer with the sunroof open is a highlight, but avoid operating it while driving to stay safe and distraction-free.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What does steam consumption rate mean?

Steam consumption rate refers to the amount of steam consumed per kilowatt-hour of work produced. Below are the specific details about steam consumption rate: 1. Unit: The unit of steam consumption rate is kg/kW·h, denoted by d, where d=D/N, with D being the main steam flow and N being the electrical power output of the unit. 2. Calculation formula: Steam consumption rate = main steam flow × 1000 ÷ power generation, with the rated steam consumption rate being 3.025 kg/kW.h. The main steam flow is an accumulated figure over a day or a shift. The instantaneous main steam flow seen on the DAS screen is not measured directly but calculated using the formula: main steam flow G = (PⅠ² - P high exhaust²)^0.5 × 81.9 × 540 ÷ superheater outlet temperature.
11
5
Share

Who is responsible for windshield damage caused by stones on the highway?

If you can identify the vehicle that kicked up the stone and provide evidence, you can file a claim. If the responsible vehicle cannot be identified, you will have to handle the matter yourself. Here is some relevant information about highways: 1. Introduction to highways: Highways refer to high-speed roads, which are faster compared to medium-speed and low-speed roads. In environments where low-speed is predominant, low-speed is considered normal or standard speed, while in environments where medium-speed is predominant, medium-speed is considered normal or standard speed. 2. Precautions before entering a highway: Check the weather and road conditions, perform a safety inspection on your vehicle, plan your route in advance, carry a warning triangle and a fire extinguisher, and determine your driving and rest schedule beforehand.
14
0
Share

Can Mineral Water Be Stored in the Trunk During Summer?

Mineral water can be stored in the trunk during summer as long as it is not exposed to prolonged direct sunlight, as the temperature inside the trunk will not become excessively high. However, if the car is left under the sun for an extended period, it is advisable not to keep mineral water in the trunk. When a car is parked outside during summer, the interior temperature can rise significantly after prolonged exposure to sunlight, causing many drivers to start sweating within half a minute of entering the car. Here are some additional tips: Summer car usage precautions: During summer, the car's air conditioning is used almost daily. The cooling principle of a car's air conditioning is quite simple. To activate the cooling function, press the AC button, which engages the compressor clutch. The engine then drives the compressor to operate, continuously compressing the refrigerant and delivering it to the evaporator. Inside the evaporator, the refrigerant expands and absorbs heat, thereby cooling the evaporator.
16
4
Share

Method for Adjusting Valves in Xikang Engine

The methods for adjusting valves in a Xikang engine are the 'Double Row Not In' method and the 'Not In Double Row' method. Below are detailed introductions to these valve adjustment methods for the Xikang engine: 1. Double Row Not In Method: Position the first cylinder of the engine at the top dead center of compression for the first cylinder, where the intake and exhaust cams of the first cylinder do not press on the intake and exhaust valves. 2. Not In Double Row Method: Rotate the crankshaft to bring cylinder I to the top dead center of the compression stroke, then adjust all valves except those corresponding to cylinder I (cylinder VI) to the specified clearance. Next, rotate the crankshaft one full turn to bring cylinder VI to the top dead center of the compression stroke, and adjust the intake and exhaust valves of cylinder VI as well as any valves in cylinders II, III, IV, and V that have excessive clearance, setting their clearance to the specified value. At this point, the adjustment is complete. The process continues in a similar manner for other cylinders.
9
0
Share

What is the speed limit for the slow lane on the highway?

Highway slow lane speed limit is 90km/h. Here is some relevant information about driving on the highway: 1. Introduction to highways: Highway refers to high-level speed, compared to medium and low speeds. In environments where low speed is dominant, low speed is considered normal or standard speed, while in environments where medium speed is dominant, medium speed is considered normal or standard speed. 2. Precautions for driving on the highway: When driving on the highway, it is important to maintain a safe distance from the vehicle in front. When the speed is above 100km/h, keep a distance of more than 100 meters. There are distance confirmation signs on the highway to help you determine the distance. Stay away from trucks; do not drive side by side with trucks or follow behind them on the highway—try to overtake them instead. Drive in the middle lane; the leftmost lane on the highway is the overtaking lane, while large trucks generally stay in the rightmost lane.
16
3
Share

Do modified vehicles need to be restored for ownership transfer?

There are too many types of vehicle modifications. Those that have been registered do not need to be restored to factory settings, but unregistered parts must be restored. Here is an introduction about modified vehicles: 1. Introduction to modified vehicles: Modifications involve adding, removing, or replacing parts of the original factory model or altering its appearance. Reasonable and scientific modifications can make the vehicle safer to drive and improve its performance. Vehicle modifications are both an expression of personal style and a means to enhance driving performance and safety. 2. Regulations related to modified vehicles: Laws and regulations impose restrictions on vehicle modifications. The vehicle model, engine model, and chassis number cannot be altered, and the vehicle's structural integrity must not be compromised. Changing the vehicle's color, replacing the engine, body, or chassis requires inspection and approval. Replacing the engine, body, or chassis also requires submitting a qualified motor vehicle safety technical inspection certificate. Decals or wraps must not exceed 30% of the vehicle's total surface area; exceeding this limit requires approval from relevant authorities.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.