How to Open the Sunroof on a BMW 525?

1 Answers
DelEmilio
07/29/25 3:22am
BMW 5 Series is equipped with a panoramic sunroof. To open the sunroof, press the sunroof switch and push it toward the rear of the vehicle to initiate opening. The automatic sunroof and rear sunshade will open safely. Pressing the switch again will fully open the sunroof. Below is additional information: 1. Functions of a Car Sunroof: Installed on the roof, a car sunroof effectively promotes air circulation inside the vehicle, allowing fresh air to enter. It also expands the field of vision and meets the needs of mobile photography and videography. 2. Smart Uses of a Car Sunroof: It can quickly cool down the car. If parked under direct sunlight, the interior temperature can exceed 60°C in summer. Many drivers' first instinct is to turn on the air conditioning. However, it's more effective to open the windows and sunroof first while driving, which immediately vents the hot air.
Was this review help?
18
3
Share
More Forum Discussions

Should You Shift to Neutral When Starting on a Slope?

Starting on a slope requires shifting to neutral. Steps for stopping at a designated point on an uphill slope: Upon hearing the instruction "stop at the designated point on the uphill slope," turn on the right turn signal and steer the vehicle toward the right side of the road. As you approach the roadside, slightly turn the steering wheel to the left, then quickly straighten it to the right to align the right side of the vehicle parallel to the roadside, maintaining a distance within 50 cm (using the white line of the parking spot ahead as a reference, do not cross the white line). Press the clutch and slowly approach the stopping point. When the midpoint of the right fender aligns with the parking sign, press the brake, stop the car, and pull the handbrake (until you hear two clicks). Turn off the turn signal. Before starting, shift to 1st gear, turn on the left turn signal, and honk the horn once. Slowly release the clutch while holding the handbrake lever, ready to start at any moment. When you feel the car shaking or hear gear engagement sounds, release the handbrake, and the car will move forward. Method for starting on a slope: The key to starting on a slope is clutch control. Use the centerline of the car hood as a marker to align the vehicle parallel to the lane lines on both sides. Use the lower right corner of the windshield and the marker pole on the right side of the solid line on the slope as two main reference points. When driving up the slope, look through the windshield. When the distance between the marker pole and the lower right corner of the windshield is 25 to 30 cm, brake and then pull the handbrake. Taller drivers should have a shorter distance, no less than 25 cm. When starting on the slope, press the clutch and shift to 1st gear. Slowly release the clutch—releasing it too quickly may cause the car to stall. When you feel the car shaking the most, keep the clutch position steady, release the handbrake, and the car will start moving. Practice is needed to gauge the shaking amplitude, as insufficient shaking may cause the car to roll backward.
1
4
Share

What are the symptoms of a dead car battery?

The symptoms of a dead car battery include: 1. Difficulty starting the car; 2. Dimming headlights when decelerating; 3. Illuminated battery warning light. Methods to prevent a dead car battery are: 1. Remember to turn off lights and audio before shutting down the engine; 2. Develop the habit of turning off the air conditioning before shutting down the engine; 3. Avoid long-term parking of the car; 4. Regularly clean the car battery; 5. Avoid using power-consuming configurations after the engine is turned off. Causes of a dead car battery include: 1. Long-term parking of the car; 2. Battery reaching the end of its service life; 3. Engine damage; 4. Insufficient battery electrolyte or leakage; 5. Blown fuse; 6. Corrosion of battery terminals.
15
1
Share

How Many Cylinders Does the Cavalier Engine Have?

Cavalier's engine cylinder count varies by displacement: 1. The 1.0T model features a 3-cylinder engine; 2. The 1.5L model is equipped with a 4-cylinder engine. An engine is a machine capable of converting one form of energy into another, typically transforming chemical energy into mechanical energy. The Cavalier's body dimensions are: length 4474 mm, width 1730 mm, height 1471 mm, with a wheelbase of 2600 mm and a trunk capacity of 469 liters. The 2020 Cavalier is powered by a 1.0T turbocharged engine, delivering a maximum power of 92 kW and a maximum torque of 180 Nm, paired with a 6-speed automatic transmission. It utilizes a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
12
4
Share

How to Remove and Install the Door Panel of an Audi Q5?

The steps to remove and install the door panel of an Audi Q5 are: 1. Pry out the trim panel on the inner handle row; 2. Remove the screws under the inner armrest and the screws under the door trim panel, then lift upwards to remove the panel; 3. Install by following the reverse order of the removal steps. The body dimensions of the Audi Q5 are: length 4753mm, width 1893mm, height 1659mm, wheelbase 2908mm, and fuel tank capacity 73 liters. The Audi Q5 is equipped with a 2.0-liter turbocharged engine with a maximum power of 169 kW. Its drive system is front-engine four-wheel drive, with a five-link independent suspension at the front and a trapezoidal link independent suspension at the rear.
20
0
Share

How to Replace the Battery in a Besturn B70 Key?

Besturn B70 key battery replacement method is: 1. Press the white button at the top to eject the mechanical metal key; 2. Locate the hidden section and pry open the key along the seam; 3. Remove the old battery and insert a new one. Taking the 2021 Besturn B70 as an example, its body dimensions are: length 4810mm, width 1840mm, height 1455mm, with a wheelbase of 2800mm and a fuel tank capacity of 50l. The 2021 Besturn B70 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 258Nm, paired with a 6-speed manual transmission.
5
4
Share

Where is the car air conditioning installed?

The car air conditioning is installed in the following locations: 1. The compressor is mounted on the engine and driven by the engine crankshaft belt; 2. The condenser is installed behind the front grille of the car for heat dissipation; 3. The expansion valve and evaporator are installed under the car dashboard. The components of the car air conditioning system include: compressor, condenser, expansion valve, and evaporator. The functions of the car air conditioning are: 1. To adjust and control the temperature, humidity, air cleanliness, and airflow inside the cabin to an optimal state; 2. To provide a comfortable environment for passengers, reducing travel fatigue; 3. To create good working conditions for the driver, ensuring driving safety.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.