How to Open the Sunroof of Geely Emgrand?

Can You Continue Driving with a Broken Drive Shaft?

A broken drive shaft cannot be driven further, as it will only exacerbate the damage to the vehicle. Below is relevant information about axles: Introduction: Axles are primarily used in cargo trucks, military vehicles, special-purpose vehicles, or large buses. The axle is connected to the frame (or load-bearing body) through the suspension, with wheels installed at both ends. Classification by axle count: single axle, tandem axle, front four rear four, front four rear eight, and beyond that, semi-trailers, two-axle trailers with three axles, or three-axle trailers with three axles. Ordinary passenger cars typically use a single axle. For highway transport vehicles with a total mass under 19t and vehicles not restricted by road or bridge axle loads, such as mining dump trucks, a simple and cost-effective two-axle configuration is adopted. Vehicles with a total mass between 19-26t use a three-axle configuration. Function: The axle's role is to bear the vehicle's load and ensure normal operation on the road.

4

3

Share

What are the test items for Automatic Transmission Subject 2?

The C2 Subject 2 test consists of 4 items: reverse parking, parallel parking, curve driving, and right-angle turns. Compared to the C1 manual transmission test, it excludes the hill start. According to Article 25 of the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses' (Ministry of Public Security Order No. 123), starting from June 1, 2021, the C2 and C5 Subject 2 tests no longer assess hill parking and starting. Reverse parking is one of the more challenging items in the Subject 2 test, so many test centers place it as the first test item. The key points for reverse parking are: steering wheel full-lock point, 30 cm correction point, and parking point inside the bay. You must follow the prescribed route and sequence. The vehicle must be parked inside the bay without crossing the lines. Parallel parking focuses on aligning the front line of the bay with the rear wheel, spotting the rear corner in the mirror, and the distance between the wheel and the left dashed line. There's no need to straighten the wheels after parking, and don't forget to use the turn signal when exiting. After parking, the vehicle body must not cross the lines, and the tires must not touch or press the lane boundary lines during movement. Curve driving, commonly known as the S-curve, is manageable for many students with good vehicle control, indicating its moderate difficulty. However, some students misjudge the line positions during the actual test, leading to immediate failure by crossing the lines. The key to the S-curve is observing the position of the front hood's marker point relative to the boundary lines. The wheels must not press the road edge lines. Right-angle turns are relatively easier, essentially a simplified version of the exit part from reverse parking. The method for finding the reference point is the same as exiting the bay, focusing on the positional relationship between the front hood's horizontal line and the front line (just touching or slightly delayed). Ensure the wheels do not press the road edge lines. Generally, the C1 Subject 2 requires 16 hours of training, while the C2 Subject 2 requires 14 hours. Completing the required training hours is a basic requirement for taking the Subject 2 test. Training hours can only be increased, not decreased, and additional test items require corresponding additional hours. Each training hour is 60 minutes, with effective teaching time not less than 45 minutes. If you fail the Subject 2 test, you can retake it once. If you fail the retest, the current test session ends, and you must reschedule the test after 10 days. If you fail five consecutive test sessions (including retests, totaling 10 attempts), all previously passed subject scores will be voided, and you must start over from Subject 1.

18

2

Share

Can Vehicle Identification Number Reveal Owner Information?

Can Vehicle Identification Number reveal owner information? Below is an introduction to VIN-related information: Composition: The Vehicle Identification Number (VIN or chassis number) is a unique 17-character alphanumeric code assigned to motor vehicles. Function: It can identify the manufacturer, engine, chassis serial number, and other specifications of the vehicle. To avoid confusion with numbers 1, 0, and 9, the letters "I", "O", and "Q" are not used. The 10th character representing the model year does not use "I", "O", "Q", "U", "Z", or "0".

11

1

Share

What Causes the Rear Wheel to Make Abnormal Noises?

Abnormal noises from the rear wheel of a car may be caused by issues such as faulty wheel hub bearings, accidental contact of the brake pump with the brake disc, foreign objects attached to the tire surface, or abnormal tire pressure. Below is a detailed introduction about car tires: Overview: Car tires are one of the essential components of a vehicle, directly in contact with the road surface. Together with the car suspension, they help absorb shocks during driving, ensuring good ride comfort and smooth operation. Function: They ensure good adhesion between the wheels and the road surface, improve the vehicle's traction, braking, and off-road capability, and bear the weight of the car. The important role of tires in vehicles is increasingly being recognized.

16

4

Share

How long after the VIN appears can the car be picked up?

You can pick up the car one month after the VIN appears. Below is an introduction to the relevant parts of the vehicle inspection: Check the exterior: Inspect the vehicle's exterior and production date. Check all front and rear lights, and the operation of all doors. Inspect the panel gaps and tire conditions. Examine the rearview mirrors, heating, air conditioning, and horn. Check the interior: The inspection of seat interiors mainly relies on visual inspection. Verify if all items in the trunk are complete, including the spare tire, jack, tow hook, wrench, and warning triangle. If possible, lift the car to check for oil leaks from the engine oil pan and transmission.

11

4

Share

What size lens can the DL250 headlight accommodate?

The DL250 headlight can accommodate a 2.5-3 inch lens. Here are the specific details about the DL250: Model Positioning: The DL250 is an entry-level adventure bike with a stylish appearance, positioned as an urban heavyweight motorcycle. Dimensions: The DL250 measures 2240mm in length, 905mm in width, and 1340mm in height, with a wheelbase of 1430mm and a minimum ground clearance of 160mm. Powertrain: The DL250 is equipped with a twin-cylinder, liquid-cooled, four-stroke engine, delivering a maximum power of 18.4 kW and a maximum torque of 23.4 Nm.

9

4

Share

How to Open the Sunroof of Geely Emgrand?

Can You Continue Driving with a Broken Drive Shaft?

What are the test items for Automatic Transmission Subject 2?

Can Vehicle Identification Number Reveal Owner Information?

What Causes the Rear Wheel to Make Abnormal Noises?

How long after the VIN appears can the car be picked up?

What size lens can the DL250 headlight accommodate?

What does it mean when the reverse camera displays no video signal?

What does AdBlue mean?

What kind of driver's license is required to drive a tractor?

What items should be maintained at 40,000 kilometers of the vehicle?